paper cutter used for sale

Kibani Battery Brush Cutter - Incl. 20V Battery and Charger - Electric Brush Cutter - with 15CM Weed Brush - Grass Trimmer - Edge Mower Auction-ID: A1-40421-256

Stephan vacuum rated processing mixer/cutter with steam injection, type: TC/SK 300, machine number: K710500, year of construction: 1984, 380 V, 3 Ph, 50 Hz, 153 A, 78 kW, volume: 300 liter, steam heated, heating capacity: 95°C, scraper agitator, sample valve, vacuum system, hydraulic system, total dimensions: 3230 mm x 2080 mm x 3000 mm. Including s/s switch cabinet, year 2006, Siemens S7-300 Simatic PLC, Siemens TP177B Panel, dimensions switch cabinet: 2020 mm x 520 mm x 2140 mm.

Roll splitter RGS50 -Used machine- Good condition - ready for immediate use partially overhauled: Hydraulic hoses renewed Hydraulic oil change carried out Safety valves retrofitted Control overhauled Surround renewed Knives renewed Knife length 2500mm Max opening 1600mm V-table version Drive power: 15kW with soft start Dual pump with 2 stages cutting speed Two-handed operation Emergency stop cable on both sides Base frame and feed table available

Spit F 40 slot milling machine including accessories and 3 milling machines, wall groove cutter Auction-ID: A1-50540-54

Good condition Auction-ID: A1-50540-59

French papers - Net binding - 1 season driven -15 knives - Knife distance: 65mm - bale width: 120cm - bale diameter: 90 - 180cm Auction-ID: A3-46130-16540

Powertherm Evo-Cut 120 Plasmaschneider Plasma Cutter Mint condition, unused Auction-ID: A1-50625-6

Criteria: Type: rotary cutter / rotavator Working width: 120 cm Mounting: 3-point hitch Drive: PTO / gimbal Knife rotor Rear Roller Suitable for small tractors/microtractors Agricultural rotary tiller with a working width of 120 cm, intended for soil preparation and tillage. Equipped with a knife rotor, a rear roller and a PTO drive. According to the seller, the agricultural equipment in this group is suitable for a small tractor or microtractor from 16 HP. Auction-ID: A3-46130-39326

Cutting length 50 cm Nominal voltage 18 V Weight 2.3 kg Sound pressure level 75 dB(A) 1) Sound pressure level (2022 standard) 75 dB(A) without battery, without charger Auction-ID: A1-50452-36

Displacement: 27.2 cm³ Power: 0.7 kW Power: 1 hp CO2: 853 g/kWh Weight: 4.4 kg 1) Auction-ID: A1-50452-40

Milling depth: 80cm, equipped with counter weight 1500kg. Auction-ID: A1-47392-82

Tooth spacing: 34 mm Total length: 117 cm Stroke rate: 3000 rpm (UM) Sound power level: 85 dB(A) Cutting length: 60 cm Nominal voltage: 36 V Vibration value left/right: 1.5/1 m/s² without battery, without charger Auction-ID: A1-50452-35

Displacement 46 cm³ Power 2.2 kW Power 3 hp Weight 10.9 kg 1) Sound pressure level 100 dB(A) 2) DEMONSTRATOR Year of construction 2025 Auction-ID: A1-50452-37

Charging time: approx. 60-90 min Nominal voltage: 20 V Battery Capacity: 1500 mAh Charger Output Voltage: 22V/1500mA Cutting width: 300 mm Sound power level: LwA 90.76 dB(A) Battery Type: Lithium-ion No-load speed: 8000 rpm Battery voltage: 20 V Auction-ID: A1-50452-50

1.0 GML 1400 Planer Head Grinding Machine Fully automatic planer head grinding machine with variable carriage feed, automatic pitch and automatic delivery of the acceptance. TECHNICAL DATA Tool diameter: 160 - 360 mm Grinding length: 1,380 mm Graduation: (even number of blades) 2 - 40 Z additional 1, 3 and 5 knives selectable Grinding motor power: 1.0 kW Speed of the grinding wheel, adjustable: 3,000 - 6,000 rpm. • For grinding LEDINEK planing shafts as well as hydraulic planing heads, • Adjustable mounting brackets for shafts with different bearing distances, • Control console with 7.0" touch screen LENZE • Touch screen resolution (pixels) 800x480; Graphics, TFT Color • Input of the clearance angle α the planer blade via fixed value or calculates average β and γ, • Adjustable pressure on the guide ruler, • Dynamic calculation of the remaini ...

Kibani Battery Brush Cutter - Incl. 20V Battery and Charger - Electric Brush Cutter - with 15CM Weed Brush - Grass Trimmer - Edge Mower Auction-ID: A1-50335-137

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093 Auction-ID: A1-50534-352

Cutting current: up to 30 A Max. output voltage: 92 V Input voltage: 120 / 200–240 V Frequency: 50–60 Hz Burner: Hypertherm T30v For more details, see photos. Auction-ID: A7-50677-132

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095 Auction-ID: A1-50534-348

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094 Auction-ID: A1-50534-350

MAPAL heavy-duty CNC milling tool assembly with multiple replaceable indexable inserts and integrated machine-tool holder. Auction-ID: A7-50717-233

Lot of 6 assorted industrial milling cutters. Several are large indexable cutters fitted with replaceable cutting inserts. Visible markings include WALTER 280×30 WIDIA TH10, 280×30 A12, and IPR 250-1-16, ges. gesch. The lot also includes a large helical/form cutter. Auction-ID: A7-50717-212

Max. speed: Up to 12,000 sheets/hour (or 165 m/min). Max. sheet size: 550 x 750 mm. Min. sheet size: 297 x 210 mm (210 x 210 mm depending on feeder). Max. die-cutting area: 530 x 730 mm. Min. die-cutting area: 55 x 65 mm. Stock weight range: Paper and cardboard from ~80 gsm up to 0.5 mm thickness. Tooling technology: Magnetic cylinders for flexible die plates (upper and lower). Drive system: Servo-motorized register control. Key functions: Die-cutting, kiss-cutting, creasing, perforating, embossing, and automatic waste stripping.

Technical data Manufacturer: POLAR MOHR / Adolf Mohr Maschinenfabrik Model No.: 155 EMC-MON Machine number: 5821247 Voltage: 380 V Current consumption: 17.9 A Frequency: 50 Hz Phases: 3 Power: 7.5 kW Configuration Control: 155 EMC MONITOR with control panel, monitor and numeric keypad Equipment: side support tables and protective cover Auction-ID: A1-50608-26

Technical data Manufacturer: SCHNEIDER ENGINEERING AG Type: S220 Serial Number: 74-1720 Year of Make: 2008 Working width: 2,200 mm Load capacity: 350 kg Machine weight: 11,000 kg Control: NUM, PC Configuration Small-format loading station: Type 2552, SN 1022-1720, YOC 2008 Large format loading station: Type 5553, SN 1021-1720, YOC 2008 Gantry robot: for destacking, with destacking station type 5544, SN 1020-1720, year 2008 Conveyor technology: Piece conveyor belt, conveyor width 2,000 mm; Hopper on chain conveyor belt, conveyor width 800 mm Security: Security fence and light barrier Remarks Used face cutting machine with extensive automated loading, stacking and conveying technology. Auction-ID: A1-50608-131

General Description CNC profile and tool & cutter grinding machine manufactured by KELCH , model PFS 30-CNC . Designed for precision grinding of cutting tools, profiles and special tooling. The machine is equipped with CNC-controlled axes, a precision grinding spindle and a tilting workhead for versatile grinding applications. Technical Details Manufacturer: KELCH Model: PFS 30-CNC Machine type: CNC profile and tool & cutter grinding machine CNC-controlled axes Control: Bosch CNC Alpha with Bosch Alpha CRT Digital readouts: Heidenhain Control panel manufactured by Präzisionstechnik GmbH Tilting workhead Precision grinding spindle Precision workholding fixture Coolant enclosure Dust/coolant extraction system Condition Used industrial condition. The machine appears complete with Bosch CNC control, Heidenhain digital readouts, tilting workhead, precision grindi ...

Technical details Type: Universal tool and cutter grinder Configuration: - Universal swivelling grinding head - Adjustable workhead - Tailstock with centre support - Longitudinal precision worktable - Manual longitudinal feed - Belt-driven grinding spindle - Cup grinding wheel - Dust extraction connection - Manual handwheel controls Application: - Tool and cutter sharpening - Milling cutter grinding - Drill sharpening - Reamer grinding - Arbor grinding - Precision toolroom operations Construction: - Heavy-duty cast-iron machine frame - Manual universal grinding machine Dimensions: - Length: Approx. 1700 mm - Width: Approx. 1300 mm - Height: Approx. 1650 mm Weight: Approx. 1400 kg Condition: Used Observed condition: - Machine appears mechanically complete - Grinding spindle installed - Workhead and tailstock present - Longitudinal guideways appear intact  ...

General Description Automatic tool and cutter grinding machine manufactured by KOEBAU . Designed for precision sharpening and regrinding of milling cutters, drills, reamers and other cutting tools in production and toolroom environments. Technical Details Manufacturer: KOEBAU Machine type: Automatic tool and cutter grinding machine Automatic feed system Hydraulic components Mechanical workholding fixture Multiple guarded grinding stations Coolant and lubrication system Condition Used industrial condition. The machine appears complete with automatic feed system, hydraulic components, workholding fixture, guarded grinding stations and coolant/lubrication system. Operational status, spindle condition and grinding accuracy have not been tested. Auction-ID: A7-50745-26

Execution: stainless steel, - Overall height: approx. 3.180 mm, - Overhang height: approx. 2.200 mm, - Base/plate for mounting: approx. 440 × 330 mm, - Electrical drive with geared motor, - Vertical guide with tipping mechanism, - Tray/slot for containers/crates, - Robuste Edelstahlausführung für den Einsatz in der Lebensmittelindustrie, - Electrical end position/position check, execution: stainless steel, Total height: approx. 3,180 mm, Dumping height: about 2,200 mm

The lawn mower for the Mini Loader is a hydraulically driven mower for maintaining lawns, parks and roadsides. The direct hydraulic drive transfers the power to two blades. Four support wheels support the mower while working. The cutting height is adjustable, so that the mower can be adjusted to the terrain and the desired cutting pattern. Mower is equipped with a mounting plate with Euro connection! Auction-ID: A3-46134-11586

Technical details Manufacturer: Wickman Bennett Type: Universal tool and cutter grinder Configuration: - Universal swivelling grinding head - Universal indexing workhead - Precision grinding spindle - Secondary grinding spindle attachment - Reciprocating worktable - Adjustable indexing head - Precision handwheels - Wheel guard - Coolant system with integrated tank and pump - Electrical control panel - Machine work lamp Application: - Tool and cutter sharpening - Milling cutter grinding - Drill sharpening - Reamer grinding - Gear cutter grinding - Form tool grinding - Precision toolroom operations Construction: - Heavy-duty cast-iron machine frame - Manual universal grinding machine Dimensions: - Length: Approx. 1800 mm - Width: Approx. 1700 mm - Height: Approx. 1900 mm Weight: Approx. 2200 kg Condition: Used Observed condition: - Machine appears substant ...