134,310 used machines on RESALE, but how to find them? Machine Search
Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.
-Massive construction, stainless steel beams and posts; -Dimensions: W=720 mm., L= 1250 mm., H= 1470 mm.; -Power: 4 kW, 400V, 50Hz; -Adjustable legs; -The machine is an analogue of the Magurit Fromat 042 guillotine; -Complete hydraulic system of the Hydac company. -Electrical part of Telemechanics; -Knives from Germany; -Reinforced design of the knives; The blades are as follows: two upper horizontal, one lower horizontal and three vertical. -Loading the blocks: the blocks of frozen meat are placed in a chute equipped with a pneumatic cylinder that lifts it for easier loading. -After cutting, the products are unloaded directly into 200 liter carts. -With a lifting device for the moulds -Complete with vertical dicing knives -Capacity: 2000 ÷ 2500 kg. / h. Loading the blocks:The blocks of frozen meat are placed in a chute equipped with a pneu ...
Included: 1 x transfer table 102 cm high Auction-ID: A1-49964-18
3 trimmers horauf SN140, automatic , in very good condition, year 99
Stock # U2397-4 Used stainless steel micro cutter/emulsifier by Haarslev A/S (DK) model HF 175. Machine is designed for emulsifing a product, paste type. Can run on meat, chicken, pork etc. Output depends on product and can reach 3-4 tons per hour. Feeding inlet into milling chamber has diameter 105 mm. Machine has stainless steel shaft driven directly by el motor 55 kW, 2950 rpm, 380 V, 50 hz. On the shaft there are mounted two sets of six blade knives and screens. First screen has diameter of holes 1.2 mm. Second screen has holes with diameter 0.8 mm. Knives and screens are designed in non-corrosive steel. Body of milling chamber designed in stainless steel. Discharge via outlet with diameter 65 mm. Machine has local control panel and is mounted on four legs. Includes technical documentation. Last time used in food industry.
Kronen PGW grid cutter Stainless grid cutter, pneumatic cutting of fruits and vegetables into various cutting forms, mobile
Included: 1 x transfer table 102 cm high Auction-ID: A1-49964-22
The new Serrmac TCS TR series milling drill has a sturdy structure that allows heavy machining and a prismatic section column. Standard configurations: Diaphragm control panel with digital display to display the number of spindle revolutions (only on VS – VR – E); Tapping with adjustment of the working depth (only on version E with Inverter); Automatic mechanical spindle descent (0.05 – 0.1 – 0.2); Refrigeration tool system; LED lighting system 24V. FEATURES IN PHOTOGRAPHY! Each Serrmac drill can be supplied customized according to every need! Contact us for more information and / or for a custom quote.
High-speed cutter with 72cm cutting width Hydraulic pressure infinitely adjustable Electrical connection 400V/50Hz
Folienschneider / Foil Cutter BAIER FOLSCH Baujahr / Year 1966 - Serial-No. 66236
Standard high-speed cutter with 82cm cutting width Hydraulic pressure infinitely adjustable incl. 2 knives Electrical connection 400V/50Hz
Automatic Platen Die Cutter Joh. Cietz PRESTO Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools
1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)
CW30 coupling Auction-ID: A3-46162-18617
used
Karl Schnell B22 Process Automat Typ 250, suitable for the production of low to middle viscous emulsions and suspensions, such as Soup, sauce and gravy, Injection brine, preparation of process materials, etc, power supply 3AC 400 Volt, 50 Hz, 52 Ampere, 26 kW.
AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm ¡¡ QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed chee ...
Vertical milling machine SPECIFICATIONS: Spindle milling machine: Ø 25 mm Speed: 12000 rpm Installed power: 2.2 kW ACCESSORIES: 3-roller drive with speed controller
Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available
Coated; Various diameters and lengths Auction-ID: A1-49785-22
Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg
Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg
Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions
Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg
Various diameters and widths Auction-ID: A1-49785-229
maximum number of results exceeded
please refine your search
850 € 
