Format range: max. 750mm, min. 66mm. Equipment: Longitudinal seam, folding bottom, double edge, motorized format adjustment, electronic top gluer Robatec, 8 channel with 6 application heads, feeder with vibrator and self-drive, vacuum at the feeder, dental gauge, quick feeder belt adjustment, video surveillance at the handover, cutting alignment according to the feeder right and left, HHS Xtend² quality assurance system with code reader pane underglue control, disc subglue unit left with fully automatic HHS pump-up glue unit and Level control, mechanical disc top gluing unit with 2 stations, Pre-crusher right and left, kicker, counter, Bobst CUBE control, digital Position indicators, motorized additional station for folding tool, middle station in folding, additional upper middle station in folding, pressing device right/left after folding, rejection by Bobst flipper in the trans ...
Printed circuit board 734 QI (PCB) / control PC with integrated touch display on the insert, for Bobst Alpina 110 II matic. PCB Printed circuit boards 734 QI / control PC with integrated touch display on the feeder, for Bobst Alpina 110 II matic. Manufacturer numbers and replacement numbers: BSA07230000BW / BSA07230000BT / BSA07340000TH
Control Card / Plug-in Circuit / PCB Board for Bobst Alpina 110 II matic. Control card / plug-in circuit / PCB board for Bobst Alpina 110 II matic. BSA0701239601
Control Techniques Undrive M701 frequency inverter, with 5.5kW power. For Bobst Alpina 110 II matic. Control Techniques Undrive M701 frequency inverter, with 5.5 kW output. For Bobst Alpina 110 II matic.
Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1
well-preserved banding machine by Karl Tränklein, 55cm working width. Cleaned and tested
UKM 380, was converted to FK 3500 by the manufacturer
Automatic laminator machine1450 Automatic sheet feeder Automatic board feeder Automatic registration with servo motor Conveyor
Format range: max. 620 mm, min. 54 mm Equipment: Longitudinal seam, Braille, Feeder with vibrator and blow nozzles, alignment station according to the feeder right / left, print image control with camera for max. 40 cm width, with vacuum conveyor belts and production report, manufactured by IYEC Germany, pre-crushing station right and left, Minimal folding device, Braille module with 4 and 5 sections, max. 2 parallel, max. machine speed 300m/min., Disc underglue unit left, quality assurance system HHS X-tend² with code reader, glue seam control, linear ejector, extended, pneumatic, intermittent press belt, IMPAC semi-automatic Packing aid with turning station and motorized height adjustment. Original price EUR 460.000,--. Other: The machine can be viewed in the production by arrangement.
Diana Jagenberg 115-3 year:1990 -straightline -lockbottom -4 corner -6 corner -vibrator -kicker -Counter -pre breaker without electronic gluesystem
Lamina crash-lock gluer year: 2008 Technical Specification: max. thickness: 4mm for crash lock boxes 6mm for standard boxes Min. thickness: 1mm corrugated flute type: E, B, C For more technical data, please don't hesitate to contact us.
Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point gluing, electronic gluing unit HHS X-tend² 8 channel with 6 application heads, Quality Assurance System HHS X-tend², BJ. 2014 with code reader, Bottom Glue Control, Nozzle Glue Control & Linear Ejectors, Belt crusher on the right, disc gluing unit on the left, electronic overhaul with servos, feeders with vacuum, Primary crusher left, kickers, counters, digital position indicators, Pressing device after folding, motorized threading station, Jagenberg DBS 01 Control, Video Surveillance Storage, pneumatic, clocked press belt. Overhaul 2024: cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running by arrangement.
Full revised in 2023 100 cm 3 point glueing NORDSON” Cold Glueing System "ERO" Glueing System 2023 (optional) KQ” Glueing System 2023 (optional) With standart equipments Regularly maintained by Bobst It is completely overhauled in 2020 It is completely cleaned and painted It is in perfect condition Available immediately
Automatic Feed Aliening Unit Crash Lock Bottom 4 & 6 point glueing Straight Line Nordson Cold Glue System 2023 (Brand New) "ERO" cold gluer system (optional) 2023 (Brand New) KQ” gluer system (optional) Delivery Unit Can be seen in working condition It is very good condition Available immediately
Format Range: max. 2250 mm min. 340 mm Features: longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS XP-E08 with 6 application heads, Primary crusher left, counter, motorized format setting, Friction feeder with vacuum and cycle control, digital position indicators, motorized transfer station, Folding middle station, UV marker, 3 x cutting alignment on the press belt, extended press belt. Overhaul 2023: cleaned, tested, painted and with new conveyor belts, as well as equipped with new transport baths. Miscellaneous: The machine can be viewed while it is running by arrangement.
Format range: max. 1850 mm min. 420 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic HHS top gluing unit with 4 application heads, disc bottom gluing unit on the left, Primary crusher left, motorized format adjustment, Kicker, counter, friction feeder with clocking, vacuum at the feeder, digital position indicator, motorized transfer station, middle station in folding, cutting alignment according to the feeder, Cutting alignment on the press belt. Overhaul 2023 with new feeder and transport belts, new Press belts top / bottom, cleaned, checked, painted Other: The machine can be viewed while running by appointment.
Joint burning machine Make Zechni Model Cimatic Year 1970? Width 490 mm Thickness up to 80 mm thickness Details Adjustable temp, pneumatic Available direct
Hotmelt glue applicator conveyer for gluing of currogated boxes Make Nordson Model Conveyer Year 1998 ? Glue appliance width 120 cm (240 cm) Glue melter Nordson Vista Glue computer Nordson Eclipse EPC15 Number of heads 4 heads (Meier) Application to apply up to 4 lines of glue onto a substrate on the belt. commonly a corrugated box Available direct
Card gluing unit for MM saddle stitchers Make Müller Martini Model 315.0402 Year 1990? 1995? Min. size 40 x 60 Max size 250 x 350 mm Stitches 1-5 Details interface changed to modern tocuh screen, Nordson hotmelt kettle with heated hose and glue appliance head Available direct
Polygraph kama folding glue machine with 3 points format 104
Equipment: Code reading system HHS Xtend² for color codes consisting of: • Control unit X-tend² with code reader • Encoder with bracket • Touch screen screen • Folding switch with reading head CT10 • Bobst turntable ejector • Cable set complete for Bobst folding carton gluers
Width 800 mm Glues cold PVA glue Details machine modified to topgluing machine
Width 500 mm Options for PVA glue
Gluing station Prakma 105 top gluing Pressing station Prakma 105 2 roller pressing Optional can be bought "as it is" or refurbished, can be sold as stand alone units, with mounting table or with (vacuüm) belt to mount on
Format range: 1150 mm, min. 86 mm Equipment: Longitudinal seam, folding floor, double edge, electronic upper glue unit with 2 application heads, Disc upper glue unit, disc glue unit on the left, Pre-crusher right and left, kicker, counter, medium transport in folding, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped.
Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.
used
R25532/08W Cosmos Vega Folding Carton Gluing Machine Model: 145 Built: 2003 refurbished 2010 for corrugated board Available: immediately
Kohler Verpackungstechnik GmbH
