paper box machine used for sale

6cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested

Graef Euro 2250 Knife diameter 220 mm Cutting height 155 mm Cutting length 220 mm Cutting thickness 3-15 mm Tabletop unit Footprint 460 x 320 mm Stock: 50 pieces

Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Puller / Puller apparatus for transverse ovens (80cm) Fits for ovens that are 80x60cm. Bottom puller Condition: New 10 pieces in stock

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

King Regius Spiral Kneader Type: SP 125 Spiral kneader extendable with 2 stainless steel boilers digital film control with emergency off for max. 125 kg dough content per kettle Stand-up machine 400 Volt high current connection 2 Speeds Flour dust cover Year of construction 2004

Rademaker SprayIng Machine Type: Pump System Year of construction 2012 4 rows Injectors System with compressed air with large funnel Stainless steel cladding 400V 50Hz on rolls Height: 193cm Width: 160cm Depth: 140cm

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

Universum Winding Machine Type: LWT -3 - EB 2-40 with transport work table wood Long castors and flat castors Stainless steel cladding 380 V 50Hz on rolls Dimensions universe: Height: 170cm Width: 170cm Depth: 80cm Dimensions table Height: 85cm Width: 200cm Depth: 100cm

Treif bread slicer Type: Pegasus Sichelmesser Machine Cutting width: 4 – 14 mm adjustable analog control Stainless steel cladding 380V 50Hz Height: 120cm Width: 100cm Depth: 80cm

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

Benier Dough Weigher Type: B84 1 chamber with compressed air Stainless steel cladding Speed adjustable Weight range 300-1500gram Baker's condition, as it is out of the bakery without cleaning or testing

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

Rego Herlitzius Roto Shop DL Circular knife machine Stainless steel version mobile Knife reground and coated manual operation via rotary knob Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread shaft: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Cleaning machine

Slicing bread Ipeka MC easily replaceable blade system; efficiency depends on the consistence and size of the product; slicer’s speed: up to 4000 pcs/h. voltage: 400 V, 50 Hz, 3-phase

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

Wrapper Model: MK 30 Dough weight up to approx. 250 grams Winding bandwidth 320 mm Plastic-coated feed rollers for all rods such as Kornspitz and lye rods, Universal winding machine Stainless steel Input bay with safety switch bar DGUV V3 tested Croisser winding machine mobile Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled with 6 months warranty

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm

Recording table Bourg TD-T for gathering machine c.p. burg

30 ton 1250 x 2500mm

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

Puller / Puller apparatus for stoves for a long time Fits for ovens that are 60x80cm. (60cm wide x 80cm deep) Bottom puller Condition: New 20 pieces in stock

UNDER NEGOTIATION two HUSKY GL300 PET machines for sale, available 2022 Q1 Both upgraded by Husky to run 72 cavities molds, in production, exworks Europe Ask for details,

Baguette Long Scooter Kemper FR Kombi - Baguette long scooter from Kemper - Model FR COMBI - Stainless steel clad - with outlet table - can be driven on castors - 400 Volt 50Hz

For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)

Diosna spiral kneader W 240 - 3 boilers - 400kg dough - after repetition - industrial mixer

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Impact machine stirring machine Rego SM 3 E / SM 2000 overhauled with automatic timer 2 working functions 1 x stirring / 1 x beating 1 new whiter 1 new whipped beating 1 32 litre stainless steel boiler new Working shaft/stirring shaft new Boiler stroke electric Boiler lighting Connection 400V, 16A-CEE plug Used machine overhauled

Meurer high speed wrapper type: CM/HEM 60 Grouping and shrinking of beverage packages. Fully automatically grouped, wrapped and shrunk in PE shrink film. the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format .

Baguett - Dough divider JAC Tradiform - Dough weight from 150g to 950g (option 300-1900g) - 19 kg capacity (460 x 387 x 125 mm WxDxH) - Stainless steel version - Dough division and shaping - Easylock automatic snap-in of the grid holder - Modular solution thanks to partial and moulded grids - Space-saving - fast and efficient with Easy Clean - versatile use - 100 different grids are offered - Basic equipment 1 cutting grid - up to 900 dough pieces per hour are divided and 3000 shaped Connection 400V 1.5 kW, 16A-CEE plug Dimensions: 832 x 772 x 924/1756 mm, WxDxH New machine with 12 months warranty

Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

Major Baguette Long Scooter with feed belt / conveyor belt relatively good condition without export plate 380V 50Ht on rolls Metrics: Height: 160cm Width: 100cm Depth: 150cm

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

Wabäma Bread Slicer Sichelmesser Machine Cutting width: 4 – 20 mm adjustable digital control Stainless steel cladding 400V 50Hz Height: 110cm Width: 100cm Depth: 70cm

Wabäma Bread Slicer Cutting width: 8mm digital control 230V 50Hz Height: 117cm Width: 60cm Depth: 80cm

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 20 mm -Weight: 4 kg