paper box machine used for sale

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Saeege leaf grinding machine Grinding diameter max 1000mm without the pictured seed leaf, very easy to use, purely mechanical without CNC or NC, but perfect! Operating instructions Further data is not available at the moment. Special price

Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer

GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...

Number of vertical independent spindles: 9 Number of horizontal spindles on axis X : (2+2) Number of horizontal spindle on axis Y: (1+1) N° 1 saw blade unit: (ø 100 mm) Router head 3,6 Kw ISO 30 - 12000/24000 rpm Max. thickness of the panel: 50 mm Control: Full Parametric Max weight of the panel: Kg 25 Max panel size: X ,Y 1100, Z 50 mm Min panel size: X 270,Y 150 (70 op.), Z 12mm Number of controlled axes: 3 Panel feeding speed: 25m/min Spindles speed rotation: 3600 rpm Saw blade speed rotation: 7000 rpm Air pressure: 7 bar Diameter of the dust extraction: ø 140 mm Exhaust air consuntion: (2000 mc/ora) - (30 m/s) Max drilling depth in horiz. on X and Y axis: 30 mm Max drilling depth in vertical: 45 mm Max horizontal diameter of the tools: 12 mm Max vertical diameter of the tools: 35 mm Motor power: 1,5 kw Max air consumption: 60 Nlt./min. Total power : 6,4 Kw  ...

capacity 500 kg/h power 3 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 200 mm width 640 mm height 1 250 mm insertion resp. discharge height 1 250 mm weight 115 kg material 1.4301 / AISI 304 mash pump connection DN 65 AG stone discharge height 380 mm mash discharge height 340 mm suitable for stone fruit, berries scope of delivery 5 mm screen ; new machine - top condition

Machine Details Warehouse number 1105-03536 Machine type CNC lathe - inclined bed machine Haas brand Type SL 20 THE Year of construction 2006 Control type CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Technical details Turning diameter 584 mm Turning length 533 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circulation diameter 584 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool changer 12 COMPARTMENT Gear levels 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirement approx. 3.3 X 2 X 1.9 H m Information CNC HAAS LINING SLIDE 210 MM+ TAILSTOCK SPAENEFOEDERER

Cold water high-pressure cleaner with 4 kW power 170 bar pressure and 14 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High-pressure jet pipe with nozzle Optional (additional cost): - Hose reel with 15 m hose The images c ...

Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 280me with up to 280 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...

Dynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

DYNAJET 500me HELI - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and sm ...

capacity 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ \" inside connection for washing bath 2 \" outside mash discharge height 1 480 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen ; new machine - top condition

Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

DYNAJET 500me/30 basic - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the compact me-Class with a particularly high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves a flow rate of 30 l/min (1800 l/h) for particularly demanding tasks. Of course, the DYNAJET 500me 30 basic convinces not only with its high performance, but above all with its compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash w ...

Rated power up to 2000 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1600 mm width 700 mm He 210 0 / 2350 mm Hoehe Acceptance 800 mm Weight 200 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inside Connection for washing groves 2 outside High fruit delivery 1545 mm ; New machine - best condition

DYNAJET 500me/30 basic - 400V/50Hz Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/ ...

DYNAJET 1000me - 400V/50Hz/63A Cold Water Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! The DYNAJET 800me is the world's first device with 800 bar working pressure and dry-closing gun without control cable. In addition to its high performance, the Professional high-pressure cleaners above all due to their compact dimensions and high mobility. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - High durability due to screw connections made of stainless material - Crane eyelet for easy transport and handling - Splash water resistant (IP54) control cabinet for versatile and smooth use - Operating hours counter for optimal post-calculation Drive - Automatic star/tria ...

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

Motor rating 0,5 (0,7) kW (PS) Connected load 400V 50Hz (3-phase) Electrical protection 16 A Nominal rating max. 400 bottles/h Length 780 mm Width 550 mm Height 1210 mm Weight 80 kg Material 1.4301 / AISI 304 brushes from polyamide Pressure max. 3,5 bar Connection for cleaning AG-1/2\" (Gardena) water temperature max. 30° C Connection for waste water PVC-Schlauch inside Fi45mm, outside Fi50mm ; new machine - top condition

M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions

Wire comb locking machine; good condition; suitable for division 3:1; Max. Binding width 457mm (A3+); Max. Staerke 12mm; with 2 large rolls of material in white and silver.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Machine Details Warehouse number 1105-03592 Machine type lathe - cycle controlled FAT brand Type TUR 630 MN Year of construction 2011 Control type CNC Control Siemens 810D MANUAL TURN Storage location FRANCE Country of origin Poland Delivery time immediately Freight base Freely loaded from location Technical details Turning diameter 370 mm Turning length 3000 mm Top height above bed 630 mm Circulation diameter max. via face slider 370 mm Spindle bore 105 mm Spindle speeds: 2 stages 2 - 2500 rpm Tool holder REVOLVER VDI 40 Control Siemens 810D MANUAL TURN Total power requirement 18.5 kW Machine weight approx. 6 t Information Equipment: REVOLVER 8 COMPARTMENT VDI 40 Chip protection wall automatic coolant device RS 232 interface 3-jaw chuck diameter 315 mm HOLLOW SPINDLE THROUGH. 105 MM automatic lubrication system Brochure LUNETTEN 1 STUCCO

Bickel HK 3/50; good condition; Working width 500mm; Stand model; with slot and perforating tool; Foot Switch. ; ready to go. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

Small 4-side brushing/grinding machine for small parts. Minimum part length 250 m ! SPECIFICATIONS: Feed belt speed: 3-20 m/min. Spindle diameter: ø 40 mm Length of horizontal spindle shaft: 150 mm Length of vertical spindle shaft: 100 mm Maximum brush diameter: ø 200 mm Spindle speed as standard: 1000 ot/min (possibility of infinitely variable control) Power of the main motors as standard: 4x1.1 kW Power of the motor for the feed of the conveyor belt: 0.55 kW Diameter of the suction nozzle: 2 x ø 120 mm Maximum material height: 100 mm Maximum material width: 150 mm Minimum length: 250 mm (must be advised) Weight of the machine: 450 kg Compact machine with quick adjustment and optional parameters. KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushes, we offer a wide range of machines for every application. Parameter chang ...

ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...

Weibert form7 4-way combination machine Be hem length 2250 mm option: 2600 mm Cutting height at 90 ° / 45 ° 100 / 79 mm Cutting width on the parallel fence 820 mm Saw shaft speed 4000 RPM. Blade tilt 90-45 ° Planing width 300 mm 3 blade shaft Tersa Feed speed 7 m / min Max tool diameter 210 mm Max tool diameter retractable 180 mm Spindle speed 3500/ 7000 / 10000 RPM Spindle diameter milling - saw 30 mm Engine power 400 V / 50 Hz / S6 - 40% 3 x 5,0 kW -. Weight 525 kg G & pieces 5500309

Machine Details Stock-No. 1105-03620 Type of machine CNC Lathe Make SPINNER Type TC 32 Year of manufacture 1999 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time Immediate Freight basis ex Site Technical details turning diameter 150 mm turning length 300 mm control SIEMENS 810 D swing diameter 300 mm swing diameter over face slide 150 mm x-axis 400 mm z-axis 285 mm spindle passage 32 mm spindle motor 7.5 kW spindle turning speed - stepless 8000 rpm c-axis 0.001° Turret positions 12-speed VDI 25 work piece power 1.2 kW toolpiece turning speed range 6000 rpm weight of the machine approx. 1.8 t dimensions of the machine ca. 2 X 1 X 1.6 m Additional information CNC CONTROL SIEMENS 810 D

all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with batter pump (2 pieces) outfeed belt outside dimensions (l x w x h) : ± 2.600 x 1.300 x 1.700 mm

We offer you here Bros. Ice devices of shards of to wireless. If you are interested and for more information we are available.

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment

STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...

Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J

Type WLG Made in Germany 1981 y.

Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm

Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...

Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm

Pester PEWO-pack 250 stretchwrapper for folding cartons, etc., 90 degree infeed conveyor with a total length of approx. 2000 mm, format range cartons min. 30 x 15 x 60 mm (a x b x h), max. 150 x 90 x 180 mm (a x b x h), format range collation/bundle min. 60 x 30 x 60 mm (LxWxH), max. 400 x 180 x 250 mm (LxWxH), suitable for PE-foil with a foil width from 50 to 250 mm and a foil thickness from 0.025 to 0.1 mm, reel diameter of the foil max. 300 mm, electrics 3 x 400 V+N+PE 50 Hz, power consumption 2.7 kW / 4 A, fuse protection 16 A, air consumption 6 norm litres per stroke, operating pressure 5 bar, pneumatic connection 1/2 ", pneumatic pressure min. 5 bar up to max. 10 bar, capacity up to 30 collations/bundles per minute

Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.

Single-chamber vacuum packaging machine - model PlusVac 21 Main characteristics: – Completely stainless; – Automatic lid opening; – Floor model; – Equipped with a highly efficient Bush vacuum pump with a capacity of 21m³/h; – External dimensions: W 480 x L 655 x H 975 mm. (1550mm. with open lid); – El. connection: 1.1kW, 3Ph, 400V, 50Hz; – Weight 65 kg; – Camera size: W 430 x L 505 x H 175 mm; – Maximum dimensions of a bag: 400 x 500 mm; – Sealing length: 1 x 405 mm. in front; – Double sealing seam; – Control Comfort; Options /not included in the price/: – Gas injection; – Additional sealing at the back; – Sealing with cutting; – Additional sealing at the back, with gas – Vacuum pump 40m³/h – Vacuum pump 60m³/h. 1 year warranty Categories: Packaging in envelopes , Packaging technolog ...

Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm

Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min