paper box machine used for sale

Made in 1995 in Denmark. Machine No. 9585037. Made in 1995 Transport dimensions: 1800x620x2000 mm. Weight: 400 kg

Bread cutting machine Rösen & Robbert SPA 38 used sickle knife bread cutting machine with adjustable cutting width for breads up to 38cm long suitable for cutting and halving dark breads.Used bread cutting machine with cutting width adjustment of Rösen & Robbert type SPA 38.The machine runs with oiling, with sickle knife and digital steurung.Geignet to cut breads up to 38cm wide.Right compartment is inserted bread then the bread is inserted to the left. In the middle between left and right compartment, the knife rotates and cuts the bread in the desired thickness. The slices are pushed into the left compartment where they are just selected mid-disc holders. After cutting, mam can take out the slices and bag it on the tray. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Bread cutting machine R&R Type: SPA 38 for loaves up  ...

CATALOG NUMBER 6024 TECHNICAL DATA - 2.9kW main engine - 0.75kW spindle motor - 0.75kW trolley feed motor - 380V power supply - dimensions length / width / height 1600x1100x1200mm - weight 891 kg Machine equipped with: - 2 tables with dimensions of 300x340mm - pneumatic clamps - angularly adjustable tables in two planes - the possibility of making long and round tenons on the tables - table speed and spindle speed regulated mechanically - adjustable up / down tables - pin width adjustment Net price: PLN 16900 Net price: EUR 3885 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations the price may change)

used Stetchfolienbanderollierer Power: 120 pallets / h Masch. Nr. 300426

1 Qty.1 Second-hand brush grinding machine Mfc.: Gurutzpe Type: Brushes cutting machine Built: 1975 Model: Max. Q800x2500 2 Qty. 1 Second-hand Rubber Grinding Machine Mfc.: Churchill Type: PCH 24" X 96" Built: 1957 Model: Max. Q600x2400

Automatic Deep Draw Thermoformer High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled. Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc. Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service. Main features: Independently servo-driven machine stations. Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability
Easy, tool-less change over: index change and size-related parameters automatically selecte ...

Stone grinding machine Wenzler CH Bottighofen UI 56 Masch. No. 1490 Grinding wheel á 400 mm Table length 3000 mm Table width 1000 mm Table height 700 mm Engine 15 kW Unit 90 ° swiveling Hydraulic table feed Height adjustment, side adjustment electric L x W x H: 820 x 130 x 260 cm Weight approx. 6000 kg Built in 1956 The machine is in good condition, ready to use. From space, removing by buyer. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slap Miller Speed: 500 rpm – 18 fpm Capacity: 1,9 m/dk

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA second hand machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. the BALESTRINI FTA performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined. all movements of the machine are controlled by pneumatic devices and sliding carriage is hydraulic composed by 3 working units : 1 - Cutting unit circular saw max. diam. mm.400 motor power hp 3 2- Boring unit boring head with 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 hydraulic sliding carriage

A used S O R A L U C E CNC driving stand milling and drilling center FS 16000 Built in 2000 MAIN TECHNICAL DATA: Travel: Longitudinal (X): mm 16000 Senkr. (Z): mm 1600 Cross (Y): mm 1500 Milling and drilling spindle: Tool holder: ISO 50, DIN 69871 Auto. Tool tension: clamping force 15000 N Tightening bolt: DIN 69872 Form B (BT50) Spindle speeds: Special speeds: rpm 20-3000 Feeds: Feed range: mm/min 2-5000 Rapids: X-axis: mm/min 12000 Y- and Z-axis mm/min 15000 The machine is equipped with: - HEIDENHAIN control TNC 426 M. - Operator's platform in the X-direction with sliding door and Viewing windows against chip flight and splashing water. - Operator's console swivels mounted on the stage. - Automatic thermal expansion compensation of the Milling sliders. - Automatically indexing milling head. This milling head enables the fully automatic m ...

Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.

TOP STATE - OVERHAUL IN 2016! Year of construction: 2001 2D table format: 2500 x 1250 3D Max processing size: 900 mm x 2150 mm x 300 mm Power: 2000W Control: FANUC incl. cooler incl. 2D programming software + chamfer module + tube/profile module incl. training incl. commissioning incl. quick penetration incl. ball roller table with 3D cutting head incl. CNC tube axle tube and profile up to 160 mm diameter plates, chamfering 3D molded parts, tubes and profiles FE: up to 15mm Oxide-free VA: up to 8mm designed for high pressure cutting up to 20 bar no foundation required! Optional automatic loading and unloading by Mazak FMS48 is available always regularly serviced with warranty / commissioning / training

Year of manufacture 2001 generator multi pulse - 70 amp + 100 amp booster Control Mitsubishi 32 bit - CNC travel (X, Y, Z) 900 x 1,780 x 550 mm Bowl (W x D x H) 1300 x 2200 x 730 mm workpiece clamping table (B x T) 1150 x 2050 mm accessories 13-fach pick-up linear changer, CO2 fire extinguishing status completely overhauled

Offer via gebr. flexible shaft grinding machine SUHNER type Rotomax 3.5   - Lightweight and compact design - Stable high-performance motor and infinitely variable torque adjustment - Wide range of shafts and tools - Control from the handpiece by optional manual shutdown   Three-phase motor for 3-phase alternating current Protection class IP 44 Overload Power consumption 3.5 kW Voltage 400 V, 50 Hz Idle speeds Connection DIN 15: 500-10,000 min-1 Anschluss ‪DIN 10‬: 500–25.000 min–1 Speeds infinitely adjustable Mobile   Applications: Grinding, cutting, roughing, rusting, polishing, brushes, etc. For heavy work in foundries, in boiler and steel construction, in mechanical Workshops, stainless steel processing plants

Weight range: 0.25 to 3 kg Bag sizes: 60 x 25 x 160 mm min. 220 x 130 x 450 mm max. Application: Dry, free-flowing products, powdered, granular or piecemeal Typical examples: flour, sugar, tea, flakes, detergent, building powder, spices, sweet fruits

Gear hobbing machine MIKRON 102 Max. workpiece diameter 120 mm Max. Modul 2 Max. lenght of teeth 130 mm Min./max.nr of teeth 6 – 325 Angle on helical gears 0 – 90 °

Punching machine EDEL - Maximum power: 25to. - Extension 26 cm - Height: 170cm - Width: 65cm - Depth: 50cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Handtmann VF 620 vacuum filling machine with linking gear box, filling, portioning, linking, monitor control, with loading device for 200 liter standard trollies. You are very welcome to test the machine in our facility in Koblenz, Germany.

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Polishing, polishing machine, grinding machine, grinding Bock With 380V connection. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Rated output at 50% ED: 63kVA Short circuit current: 31, 5kA Eletrodenkraft: 100-600daN / EH Projection: 250-550mm --- Control: MPS 10 (5 times, 8-program) --- incl. additional options: -Foot switch "unpowered setting up" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Used cutting machine Hundegger K1 Manufacturer: Hundegger, DE Type: K1 Built: 1998 Condition: used, in operation, good Available from: 06.2021 composed of: 1. Fully automatic wood conveying with feed roller conveyor 2. Lower table swivel crosscut saw 3. Universal milling unit 4 -axis 4. Combination support for horizontal tools 5. 2x Drill Rig - Drilling direction horizontal drill length: 6. 1x Chain slot unit 7. Combination support for vertically working tools with a servo drive, cross-moving on linear guides and up to 5 vertically working, hub-controlled tool slides 8. 2x drilling rig drilling direction vertically from below 9. 1x Finger cutter Vertical 10. Marking device 11. Fully automatic beam turning station 12. Transport and positioning device 13. Electronic control with operator put, on Windows XP

Rated output at 50% ED: 100kVA Short circuit current: 41, 5kA Eletrodenkraft: 100-600daN / DH Projection: 350-650mm --- Control: MPS 200multiR1 (8 times, 8-program) --- incl. additional options: -Foot switch -Double stroke cylinder -Flow switch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

M.No: 4090 Width: 70 cm Thickness: about 1 cm

oven 850 t max 800 C with air circulation inner dimensions 1x1x2m (possible various size) PLC Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce ber ...

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

Handtmann VF 80/160 vacuum filling machine with loading device, linking device 34-4, vacuum stuffer machine for filling, portioning, linking, mc control, microcomputer control, filling capacity 3.000 kg/h, pressure up to 35 bar, portioning range 5-100,000 g, hopper volume 90/160 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.

Model: Starmatic type: K080-xx5 Model: 900-24-480-8-6-130 built: 1992 Performance: 34.000 bottles / h Direction: right machine Feeding: parallel Aggregate: Hull PWL410, back PWL410 Glue roller: steel glue roller Management: 2 x inlet star, 2 x outlet star Labels-L =: min. 50mm, 180mm Bottles-D =: min. 50mm, 125mm Voltage: 220/380 V Labels: Body, chest, back from the site: "as is" condition in a functional State or from site: outdated State with 12 months warranty Machine dimensions: 2.20 x 1.80 meters. The dimensions refer to the base without excess of aggregates and spout extension

Model: 1240-20-6-4-180 Year of construction: 1996 Capacity: 8000 direction: right machine Feeding: Linear - straight Aggregate: Agg. 1: 6pcs PWL 370, AGG. 2: 4pcs PWL 210 Aggregate self adhesive: 2 x Glue roller: Steel Management: 1 x capsule infeed star orientation, 1 x outlet star Voltage 230/400 V Etikettenl: Hull, back Machine dimensions: B = 2, 90 m, L = 2, 70m, H = 2, 40 m

Threaded drill M1 - M10 Motor 0, 22 + 032 kW Engine rpm 1420/ 2770 Spindle RPM 480-580 Weight 100 kg

Aggregate repairs for any type of KRONES cold glue aggregate. Any spare parts for cold-glue units. Please enquire. We offer complete overhauls in-house at fixed prices within a week.

Technical data: Double column vertical turret lathe CNC control Siemens 802 D Weight 66 to 63 kw Dimensions 13,600 x 9,800 x 6,750 mm Faceplate diameter 3,500 mm Maximum workpiece height 2000 mm Max support adjustment 30 ° Maximum workpiece diameter 4,000 mm Maximum workpiece diameter with page support 3,750 mm Number of support 2 Max turning height 1,400 mm Maximum workpiece weight 25 to Max speed 30/min Min. speed 1/min

Working width: 1020 mm, sheet thickness: 1 mm top rollers diameter: 55 mm bottom rollers diameter: 55 mm space requirement: 1370 x 570 x 1100 mm

Precise, smooth-rolling standard drill, high accuracy and quality. drilling table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle In stock, available now

Double chamber vacuum packaging machine Röschermatic VM-42/2/C, MC control, all stainless steel, high performance vacuum pump, electronic control, inlet plates for height adjustment. You are very welcome to test the machine in our facility in Koblenz, Germany.

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, with servo drive, compact monitor control, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., with linking device You are very welcome to test the machine in our facility in Koblenz, Germany

Vemag Robot 500 vacuum filling machine / dough portioner, double screw System, for filling, portioning, linking, microcomputer control, filling capacity up to 2,500 kg/h You are very welcome to test the machine in our facility in Koblenz, Germany.

used Handtmann VF 630 vacuum filling machine for filling, portioning, linking, year of construction 2008, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 10.200 kg/h, pressure up to 40 bar, up to 700 port./min., portioning range from 5-100,000 gram