paper box machine used for sale

Machine was serviced annually. Maximum bottle diameter 69mm. Set up for the following formats: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Information without guarantee Yearly maintenance. Bottle diameter 69mm. Prepared for this sizes: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Informations without guarantee

3 stages, 380 V 50 Hz Connected load: 10.5 kVA Rated current: 16 A

MIG 100 welding machine including welding wire - welding helmet - steel brush

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Serial number: 22320321 Travel X-axis: approx. 500 mm Travel Y-axis: approx. 750 mm Travel Z-axis: approx. 300 mm incl. granite measuring plate Plate dimensions: 1200 x 840 mm incl. documentation, calibration ball, touch probe and hardware Reference: Schmidt - Lot 89

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

Verboom tenon milling machine Brand: Verboom Type: PN 5 LINKS Standard: BHG / SHA adapted according to the currently valid regulations Labour legislation applicable within the EU Machine data: Pinon milling machine with 5 processing units (1 saw + 4 milling machines) 1. Saw unit positioned over the workpiece, 4.0 kW, ø400 mm 2 tenon milling unit over the workpiece with 2.2 kW 3. Pinon milling unit below the workpiece with 2.2 kW 4. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive 5. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive All motors are equipped with zero branch safety, The machine has a pressure guard so that the workpiece must be clamped before the aggregates start, The hood and the protective curtain are equipped with door switch. ...

Inv. Num. : 6435 Type: MTX Flex 6 Producer: Euromac Generated: 2014 Parameters: Software: RADAN Operating hours: 19932 h Switch-on hours: 12452 h Compressive force: 30 t Machine height: 1900 mm Machine length: 4840 mm Machine width: 3630 mm Equipment: Multitool Flaps

sheet width: 2000 mm plate thickness: 2 mm distance between columns: 2080 mm total power requirement: 2,2 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 3,0 x 1,2 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical lathe MORANDO 2000 for sale Technical data: - X axis: 1600 mm - Axial travel: 900 mm - Turning diameter: 2100 mm - Maximum turning height: 1350 mm - Platform diameter: 2000 mm - Maximum table load: 21000 kg - Spindle power: 75 Kw - Spindle revolutions/minute: 110 rpm

Line distributor bottle transport for PET bottles Lane Divider Diverter Conveyor for PET bottles, 4 tracks/lanes

Equipped with ground cable and welding pliers

Mobile

RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz

Max diam 250 , max lenght 2000, 3 x heads , change gears

Sheet metal roller for the vice. Maximum working width 300 mm. Maximum rolling capacity 2.5 mm. Diameter of the rollers 32 mm. Condition: never used / new (5)

Incl. control panel and accessories

MECA Thermoformer Type: 650 Number: T02126 Year of construction: 07/04 Distance between chains: 500 mm Dye's: (4x) 210 mm x 170 mm, total dimensions: 7300 mm x 1300 mm x 2470 mm Including large amount of parts.

Postforming machine in cycle Brandt type PF 20/31 Specifications: • Working length max. (mm): 3100 • Profile height max. (mm): 200

Condition: unused, in the original packaging Portable welding machine Adjustable current: 10-130 Ampere Electrodes: suitable for electrodes from 1.6 to 3.2 mm Ø Duty cycle: 25% Equipped with: LED display Includes: MMA torch Connection: 220 Volt Technology: IGBT technology Function: electrode welding (MMA) Equipped with: "hot-start", "arc force" & "anti-sticking" function Features: Small size, lightweight, portable and easy to use Includes: manual

Industrial surface grinding machine for machining flat surfaces. Equipped with NC control, magnetic table and sprinkler system with tray and filtration.

Serial number: 532053 Operating voltage: 3 x 380-420 V Frequency: 50 Hz Rated current: 7.4 / 10.0 A Grinding wheel diameter: 250 mm Table dimensions: 210 x 200 mm with attached clamping system Jaw width: 80 mm Training workshop part 2 - Lot 18

1 GALAN fancy yarn twister type Mini PR-F/3 MP, 6 spindles, ring diameter 120 mm, tube adjustable up to 500 mm, fully electronic control through step-by-step motors, electronic programmer type GTG-S-6. This machine was bought for a laboratory and has never really been used

BÖHL JUNIOR S-450 VA Verpackungsvollautomat für alle Arten von Langgut Produktabmessungen • Breite 80 – 220 mm • Höhe 50 – 100 mm • Länge ca. 2.000 mm bis 6.000 mm • Gewicht ca. 30 KG • Maximale Querschnittdiagonale 311 mm Packmaterial • PE-Stretchfoliendicke ca. 7 – 50 my (empfohlen 23 my) • Rollendurchmesser 220 mm • Rollenbreite 250 mm • Hülsendurchmesser 76 mm Leistungsbeschreibung • Wickelring D = 450 mm Innendurchmesser • Geschwindigkeit max. 20 m/min. (frequenzgeregelt) • SPS-Steuerung Siemens S7-200 mit Touchpanel • Steuerspannung 24 V DC • Anschlussspannung 3 x 400 V – 50 Hz • Leistungsaufnahme ca. 2 KW • Sicherung 25 A • Geräuschpegel 79 db • Betriebsdruck 6 bar • Luftverbrauch ca. 20 Normliter pro Zyklus Technologie • Automatisches Glattschnitt-Schneidwerk für das Verpackungsmaterial • Ve ...

Serial Number: 69375 Type: Cylindrical grinding machine between points Equipment: Fixed and movable headstock, grinding wheel Status: Used machine with signs of wear and corrosion Additional information: Manual control with control panel

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 270/975, year 2001, capacity 5 Kg per batch, autoclave diameter 270 mm, delivered with 1 carrier with 1 sword, sword useful loading height 975 mm, add vessel

Ipeka packaging machine with 2 bag blowers used

Punching machine with trump tool holder, back gauge via adjustment wheel with display Working area: approx. 1000 × 500 mm Max. sheet thickness circa. 6 mm steel control voltage: 220 V-required fuse for the machine is 16 Weight: approx. 2000 Kg

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Equipped with mains voltage: 415 V AC ±15 %, 3-phase; Frequency: 50/60 Hz; rated power: 19.4 kVA; output current: nominal 120 A; duty cycle 60%; Efficiency: 0.85; IP23 degree of protection; cutting up to approx. 35mm; internal air pump; Transport 655x385x625mm 35kg; Unused in box

Featured. Earth cable clamp; Reducing valve; Air Cooled Weld Toots

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 550/975, year 2001 and 1989, capacity each 20 Kg, autoclave diameter 550 mm, The 2 machines are delivered with total 2 bobbin carriers with 4 swords each, each word has a useful loading height 975 mm, add vessel on each machine, the 2 machines share the same electrical cabinet which was supplied by LORIS BELLINI in 2001

Milling machine Mikron WF 21C Year of Make: 1996 Technical data X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6

table Ø 550 mm; Equipped with roller conveyor

Machine number: 0102 Operating voltage: 230 V Frequency: 50 Hz Connection: 100 W Pressure: 0.8-5 bar Internal dimensions: 580 x 500 x 300 mm Reference: Lotec - Lot 222

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 840/975, year 1998, capacity 40 Kg, autoclave diameter 840 mm, delivered with: 2 carriers with 8 swords each, each word has a useful loading height 850 mm, 1 carrier for bumps or loose stock inside diameter 750 mm and core diameter 300 mm and useful height 800 mm, add vessel with mixer

Belt width: 65 mm incl. whetstone, diameter: 110 mm

Equipped with: adjustable drilling table

Tapping machine, drilling and tapping

Equipped with fuse; 3 Allen keys; carrier strap; 3 handles; Drilling capacity: 35 mm; Drilling depth: 210 mm; Speed: Up to 830 rpm; Adhesion: 16000 N; Power: 1600 kW; Connection: 230 V; Automatic cooling system; Unused in box

Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44;