paper box machine used for sale

Jaw width: 160 mm Reference: Osthoff - Lot 43

Product number: 1718 Type: PR600C Serial number: 250 Belt width: 600 mm Power: 380V, 50Hz, 1.7kW Dimensions: 2610 x 900 x 1860 mm Weight: 380 kg For standard crumbs and japanese crumbs

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

2x 4.0 amp/h batteries brushless

Mobile; equipped with various welding cables

Machine number 6418106052 material discharge length approx. 1600 mm with feed length approx. 2200 mm max. material span approx. 250 mm (measured) max. material clamping height approx. 200 mm (measured) with discharge roller conveyors, 2 pieces each approx. 1000 mm length max. load t/m total material removal length approx. 4000 mm with spare saw blades, approx. 8 pcs.Reference : Prologtec Lot 3

stacking bundler Heidelberg HSB 34; good condition; cleaned and tested; .max. Format 34x23cm, min.14x8cm; .max. Stack length unpressed 75cm; Bandwidth 12mm PP tape; Compressed air required. Stacker bundler Heidelberg HSB 34; good condition; cleaned and checked; max.size 34x23cm, min.14x8cm; max.pile lenght unpressed 75cm; band width 12mm PP-band; need compressed air.

v.v. welding torch

Table dimensions: approx. 410 x 360 mm (inside ) with machine vice, jaw width: approx. 125 mm with swivelling work table Reference: Hansmann - Lot 34

3 stages, 380 V 50 Hz Connected load: 10.5 kVA Rated current: 16 A

MK2

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m

Serial number: 22320321 Travel X-axis: approx. 500 mm Travel Y-axis: approx. 750 mm Travel Z-axis: approx. 300 mm incl. granite measuring plate Plate dimensions: 1200 x 840 mm incl. documentation, calibration ball, touch probe and hardware Reference: Schmidt - Lot 89

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

aba FF 625 Surface grinding machine ABA Precision Surface Grinding Machine FF600/25 Grinding length 600mm Scrap width 250mm Electric Magnet 600x250mm Workpiece height 400mm Diamond puller Height adjustment digital Motor 3,27 KW 400 V 50 HZ Coolant device Grinding wheels and flanges Weight: approx. 1350 kg G&-5020-M1768

2.4 kg batch like new, only 4 x run, airflow, drum speed adjustable, Artisan cropster connection

With extraction; Suction line to the valve

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition

Clever HIT S-20 installation kit complete for stationary machine with joint milling (This is a Vorfür unit) Net worth: 11 KW Air heater max. temp.: 650°C at 20 m/min feed List price: € 12.890 our price: € 5.950 Installation/retrofit: € 2.950

Brand 1210F - KDF210 Optimat Brand: Brandt Type: KDF 210 -1210F Year of construction: 2014 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely for good and con ...

Coordinate grinding machine for precise grinding work in tool and mould making. Table travel: 400 x 200 mm Equipment: several grinding motors Accessories: various turbines Speed range: up to 225,000 rpm The machine is ideal for fine contouring, drilling and fitting work where high accuracy and clean surfaces are required.

Okoma PN 2 tenon cutter Brand: Okoma Type: PN2 Year of construction: M-No.: Machine data: saw: 3.0 KW, 2.800 rpm, tool: ø400 mm, 140 mm cutting height - turret head cutting height Slot spindle 7.5 kW - 2,800 rpm, tool: ø400 mm, 4,000 rpm, spigot length: 170 mm spindle clamping length: 160 mm Table: Electric, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 2.2 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

Jaw width: 125 mm Vise length: approx. 470 mm Reference: Hansmann - Lot 43

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

X-travel: 600mm, Y-way:450mm, Z-travel: 450mm; Machine Number: 14772; Table size approx. 800x460mm; Speed max. 10000 rpm, 30-fold tool changer, Tool holder: SK40; Max. table load: 1000kg; Control: Heiden-Hain: TNC430 ; incl. tool cabinet, equipped with tool holders and tools; incl. chip conveyor

Incl. peripherals and documents Dismantled for transport Video available!

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it.

Exhibition machine, unused. • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With special tool set Sheet thickness 4 mm Roll diameter 125 mm Projection 200 mm Total power requirement 2.2 kW Machine weight approx. 0.48 t Dimensions approx. 1.6 x 0.6 x 1.2 mm

Edge banding machine Cehisa SYS 5PS - Only about 60 km edges glued / little used! - Condition tiptop - Sturdy construction all important aggregates available: - Infeed ruler - Joining milling - Preheat plate - Glue application - Apply edges (rolls or strip magazine) - Pneumatic pressure roller driven - Pressure roller on top, spring-loaded - Pressure roller at the bottom, spring-loaded - Caps front & rear - Flush milling top and bottom - Copy corners front and back -Scraper - Schwabbelscheibe Accessories: -Tool - Feed rollers for various edge materials - various spare blades - Settings folder Year of construction 2008 Masch. No. 532 The machine is approx. Available at the beginning of October (probably earlier) and would then have to be picked up on a fixed date. Disassembly and collection by buyers The machine is in top condition, ready for  ...

Electrostatic filter included Pull-in defective, the conversion to stepper motor (servo motor available) was planned, but not implemented.

Jaw width: 125 mm Reference: Hercegfi - Lot 5

Operating voltage: 220 -240 V Frequency: 50 Hz Speed: 1000 - 3800 rpm incl. various matching accessories

Tetra Pak TCAP/21 1000 ml ReCap 3 applicator We offer: Tetra Pak TCAP/21 ReCap 3 applicator for 1000 ml Tetra Pak beverage cartons, Year of construction 2004 - in very good condition - optimally maintained Subject to prior sale

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

Tetra Pak TCAP/21 1000 ml ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml Tetra Pak beverage cartons, manufacturing year 2004 - in very good condition - excellent serviced Available from stock Prior sales reserved

Martin T45 Thickness Planer Brand: Martin Type:T45 Main motor 5.5 KW - 400 V Speed 5,000 or 6,000 tpm Knife shaft Z-4 Tersa Flight circle ø125 mm Planer width 6,300 mm Planer thickness 2.8 - 300 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 6-12 m/min. weight 1.500 KG Condition: NEW Price Dealer price: Options: Planing shaft: X-Plane planing shaft with 4-fold reversible blade T45 Contour: Machine for profiling, with Z-4 Tersa, Z-2 Contour profile inserts T45Plastic: Machine especially for plastic processing Motor 7.5 KW, 11 KW and frequency controlled Thickness table extension: import and export side640 mm or 1,200 mm Feed: Frequency control from 2 to 25 m/min. Indent: Articulated feed whales Pull-out whales: Second pull-out whales Machine lubrication: Central with hand pump or automatic Table bezel: import has been atta ...

offer 23034 Specifications: - grinding length approx. 350 mm - grinding width 150 mm - installation height with / without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet grinding device - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

Unused

Manufacturer: ELB Type: SWN 6 VA2 Year of construction: 1982 Grinding length: 600 mm Grinding width: 320 mm Workpiece height: 525 mm Table clamping surface: 600x300 mm Magnetic plate: 600x300 mm Machine dimensions: 2600x1500x2000 mm Machine weight: ca. 2t