paper bag machine used for sale

Unused in the original packaging Microprocessor controlled MIG/MAG/MMA/TIG Lift inverter multi-process welding machine. Input voltage - 3PH 400V Mains frequency - 50/60 Hz Current range - 20-300A Maximum current - 300A @60% DC current - 205A Maximum no-load voltage - 63V Maximum current drawn - 15A Absorbed current at 60% - 10A Maximum power consumption - 9 kW Power consumption at 60% - 6.5 kW Power factor - 0.9

Maschine zur Belüftung von Sahne. Effizient, in sehr gutem Zustand. Bei Interesse nehmen Sie bitte Kontakt mit mir auf.

Brotschneidemaschine verwendet. Sehr guter Zustand.

Balestrini linear milling machine two milling units pneumatic pressure of elements

Machine number: 00122457 Speed: from 240 to 3800 rpm Table dimensions: 300 x 230 mm with vise attached, jaw width: 100 mm

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Hours: 48690 - Spindle hours: 13465 - Max. table load: 1,000kg - Machine weight: 6,000kg - Incl. 117 tool holders – HSK40 - incl. all descriptions - incl. programming manual – Heidenhain - Incl. 2 machine vices - Incl. 1 rotatable vice - Incl. set of collets ER40 - incl. clamping claws, etc. - Incl. pressure load cell for tool measurement

1 of used stretch-wrapper, make Lantech, type Q 600, new 2007. Siemens S7 controls. With turntable. Capacity upto 45 loads/hour. Min load size 91.4 x 91.4 x 61 cms, max load size 137 x 122 x 233 cms. Max load weight 1.800 kgs.Dismantled and ready for shipment. Excellent condition!

Make : Trepko Filling Machine Cup Type : Split Cup Filling : Cereals and Yoghurt Condition : Good Pick and Place device for cup in Trays

Machine is like new, has not run for 15 hours.

Jaw width: 125 mm Vise length: approx. 470 mm Reference: Hansmann - Lot 25

Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

The ZOLLER Saturn is a precision tool presetting and measuring machine designed for use in CNC machining environments. It allows accurate measurement and presetting of cutting tools before they are installed in milling or turning machines, reducing setup time and improving machining accuracy.

Manufacturer: KAO FONG MACHINERY CO., LTD. (KAFO) Year: 1990 Type: CNC Vertical Machining Center CNC Numerical Control: FANUC Series 15-M Axes: 3-axis (X, Y, Z) Strokes: X 1030 mm / Y 210 mm / Z 610 mm Spindle: BT40 – up to 6000 rpm – power approx. 11 kW Tool magazine: 20 positions BT40 Weight: approx. 6000 kg Origin: Taiwan Notes: Heavy-duty CNC vertical milling and boring machine for general machining.

Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional

Equipped with: linear guides and spindle adjustment.

Brush deburring machine Brush diameter 250mm Brush width 60mm Speed 1500/3000rpm Motor 2.0/3.0KW See pictures Condition: unchecked (6)

Jaw width: 160 mm Reference: CES - Lot 28

TIG & MMA welding machine Functions: hot TIG, lift TIG, CLEAN & MMA Adjustable current: 40-190 Ampere Duty Cycle: 40% Duty Cycle Equipped with: LED color display Includes: TIG torch Includes: MMA torch Connection: 220 Volt Technology: IGBT technology Includes: manual

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

On and including steel base, total size 700x650x1900mm.

Includes 2x adjustable sawhorse

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Large batch of Guhring industrial twist drills

Spiral kneader Diosna W 240 A with 2 boilers Diosna spiral kneader W 240 A in good used condition with stainless steel spiral.The kneader is suitable for industrial and craft bakeries. The kneader and the boilers are driven by gear. -for max. 240 kg dough or for max. 150 kg flour -Stainless steel spiral kneader -digital control -Boiler inlet with pliers locking -with Siemens touch panel control -robust machine -more pictures and information on request -Shipping and trade-in on request -Machine can be viewed and tested in our warehouse

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

Keksmaschine gebrauchte

Sollas Bandum 25, untested, as spare part donor

Sheet metal deburring machine - ESA touch panel - Incl. turbo separator - Incl. 3m feed table - Replacement tapes - Documentation Workpiece width 900 mm Workpiece height - max. 40 mm Feed speed mm/min Workpiece length 0 mm Control Total power requirement 35 kW Machine weight approx. 3.7 kg Dimensions LxWxH 6.0 x 2.35 x 2.2

Condition: unused, in the original packaging Portable Welding Machine Adjustable amperage: 10-130 amps Electrodes: Suitable for electrodes from 1.6 to 3.2 mm Ø duty cycle: 25% duty cycle Equipped with: LED display Includes: MMA torch Connection: 220 volts Technology: IGBT Technology Function: Electrode Welding (MMA) Equipped with: "Hot-start", "Arc Force" & "Anti-sticking" function Features: Small size, lightweight, portable and easy to use Including: manual

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

Grinding machine XXIII DH3 ready for use from site in actual condition

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Jaw width: 160 mm Reference: Lotec - Lot 65

Equipped with separate hydraulic power unit and power supply

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

4000 x 2000mm 6000w with auto pallet changer

Total. 3 pieces, different makes and designs

Jaw width: 160 mm Reference: Osthoff - Lot 45

MIG/MAG welding machine with: Hose package Ground cable Set of welding nozzles Welding current max. 200 A Open circuit voltage 14 - 24 V Connection voltage 230 V Weight 25 kg Dimensions LxWxH 500 x 200 x 300 mm Welding wire not included Condition: never used / new (5)