138,087 used machines on RESALE, but how to find them? Machine Search
5 and 10 liter capacity, up to 6 bar Auction-ID: A1-50251-521
Year of construction: 2008 Auction-ID: A1-47391-336
Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle VEB GR2HVX SN. MA24F165L2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Spindle press: Hand spindle press -Pressure: max. kg -Stroke: 60 mm -Intermediate dimension: 200 mm -Dimensions: 1020/600/H1520 mm -Weight: 120 kg
Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.D+MKE Year 1998 - Serial-No. 101486/98-256505 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
\" General Description Continuous fusing press manufactured by Oshima Co., Ltd. , model OP-1000SP . Industrial textile machine designed for continuous heat-and-pressure bonding of fusible interlining to fabrics in garment and textile production. Technical Details Manufacturer: Oshima Co., Ltd. Model: OP-1000SP Machine type: Continuous fusing press Year: 2024 Serial number: 23 (partially legible) Fusing width: 1,000 mm Maximum temperature: 200°C Maximum pressure: 0.5 MPa Fusing time: 7–34 sec Power supply: 3-phase, 380 V, 50/60 Hz Rated current: 45 A Heater power: 28.8 kW Drive motor: Approx. 0.2 kW Two-stage pressure system Silicone-covered pressure rollers Upper and lower continuous fusing belts Separate heating chambers with temperature control Automatic belt guiding / correction system Cooling system Fabric stripping system Emergency stop and pressure gauge ...
Buchdruck Schließzeuge Regletten / Letter Press closing tools - rules Schließzeuge in Breiten 9-12-18-25mm und Längen 5-7,5-10-12-15-18-20-25-30 Keilmutter Keilback Schraube Regletten, Blei Schlüssel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
For sale is a used low-pressure cleaner, from the manufacturer System Cleaners. The LEDA 5 comes from a prototype plant and is only 50 operating hours. Year of Make: 2011 Type: LEDA 5 FF Max. temperature: 70°C l/min. max.: 120 Voltage: 3 x 400 V Frequency: 50 Hz Dimensions (L x W x H): 1700 x 800 x 540 mm Weight: 150kg Grundfos Vertical Pump: CRNE5-14 J-CA-GI-E-HQQE incl. installation and maintenance instructions Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.
Key data: 100 t, 355 mm, 125 mm
Press force 100 t The dimensions of the table top 1000 x 640 mm Stroke adjustment 125 mm Plunger adjustment 90 mm Stroke rate 75-150 rpm Main motor power 6/10 kW Machine dimensions L x W x H 1725 x 2230 x 2970 mm Machine weight 10100 kg
pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 Gebr. Hose press Uniflex HM 18.2, built in 1982 Technical data: Manufacturer: Uniflex-Hydraulik GmbH Model: HM 18.2 (robust production hose press with the proven, lubricant-free plain bearing technology for less wear and cleaner work) Application / Suitable for: 2-wire hoses: up to DN 60 4-wire hoses: up to DN 60 6-wire hoses: up to DN 50 Press jaws / tools: Number of press jaws per set: 8 pieces Overall dimensions (W x D x H): approx. 780 x 860 x 1,500 mm Electrical connection: 400 V / 380 V (three-phase current) Motor power: approx. 7.5 kW Typical features Plain bearing technology: Requires no grease, which means that dirt and scale do not stick to the crimping jaws, minimizing wear and extending the service life. Control: A wide range of programs can be selected (fully automatic, semi-automatic, manual control) for precise and repeata ...
REIS TUS 115 OK 100 Die Spotting Press pressure 100 t table surface area 890 x 1280 mm ram surface 1000 x 1200 mm distance between columns 1250 mm stroke 1035 mm distance table/ram, max. stroke up, adjustment up 1035 mm side window 700 mm table height over floor 630 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11 t Dimensions (WxDxH): 2,1 x 3,8 x 3,9 m swiveling ram movable table table - tiltable ram interlocking hydraulic ejector in table
Müro A3/2000 WT block size press; good condition; cleaned and tested; 2 hot air dryers; Working width 525mm; Insertion height 200mm. Padding press Müro A3/2000 WT; good condition; cleaned and checked; two dryers; working width 525mm; working hight 200mm.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 300 mm stroke: 8-140 mm no. of strokes: 70 Hub/min ram - range of adjustment: 100 mm table surface area: 750x620 mm ram surface: 500x340 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 2100x1500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General Description Industrial high-pressure water pump manufactured by PTC , model MLR 300/200 . Heavy-duty electrically driven pumping unit designed for high-pressure water applications. The unit was used exclusively on one project to operate a Wassara water-powered down-the-hole (DTH) drilling hammer. Technical Details Manufacturer: PTC Model: MLR 300/200 Machine type: High-pressure water pump Year: 2022 Operating hours: 578 h Maximum working pressure: 200 bar Maximum flow rate: 300 l/min Electric motor power: 132 kW Power supply: 400 V, 3-phase, 50 Hz Rated current: 250 A Starting system: Star-delta Starter manufacturer: Formis Davide Electrical cabinet protection: IP66 Application Previously used to supply high-pressure water to a Wassara water-powered DTH hammer. Suitable for demanding industrial, drilling and high-pressure water pumping applications where hig ...
Machine name: Passavant 1500 Manufacturer: Passavant Type: 1500 Year of Make: 1977 Design: Bridge spar press Filter pressure: 15 bar Press capacity: 3,000 liters Expiration:Closed Filter area: 215 m2 Plate format: 1500 x1500 mm Number of plates: 60 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloths: No Filter Cloth Washer: Yes Panel package length: 4,400 mm Cake thickness: 30 mm Closing pressure: approx. 400 bar Dimensions: L 8,300 x W 1,950 (2,400) x H 2,930 (700) mm Accessories: A hydraulic system, a light barrier, a filter cloth washer Condition: Used Price: On request
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
Qty. 1 Second-hand 160 MN Horizontal Direct Single Action Extrusion Press Mfc.: SMS Force: 16 000 MT Built: 2015/2016 Billet dim.: Dia. 610/720 x 750 – 2500 mm Scope of supply: Induction Billet Furnace Extrusion Press Quenching System Puller Run-Out Table Stretcher Finishing Saw Profile Stacker Die Oven Billet Peeling Machine
pressing area: 2500mm x 1100mm; opening: 400mm; heating: elektrisch; plate surface: ALU - Gold eloxiert; Emergency stop switch: yes; pressure: 65t; number of cylinder: 4; electricity: 22A; machine length: 3500 mm; machine width: 1300mm; weight: 3000kg;
Connected load 380V 3.5A Pneumatic connection 8 bar Total height 3600 mm Overall length 4400 mm 1x fixed stop 2x pressure beams - can be clamped over rack 2x pressure cylinder stroke 100 mm pneumatically clampable 1x manual control for transverse and longitudinal pressure and loosening presses 1x medium pressure beam 600 mm height (working area) 1x additional longitudinal pressure cylinder 1x slanted window pressing device
pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2018 Type: 101-60 Machine No.:108141 electric double eyelet device with foot switch for inserting 2 eyelets at a fixed distance of 28mm Punches holes and eyelets in one operation. Eyelet type 8E, 8E 4long and 8E 5long Inner diameter 5.50mm Insertion depth 60mm Paper thickness 2 to 15 sheets (8E), 2 to 20 sheets (8E 4long) 5 to 25 sheets (8E 5long) Automatic eyelet feed via magazine Weight 49kg Available: immediately Located: Germany
Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details.
Pos. 5 – 1 1000 MT Press Mfc.: Yejing Force: 1000 T Type: LH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 2 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 3 1000 MT Press Mfc.: Yejing Force: 1000 T Type: LH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 4 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 1 – 4 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: ...
Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg
Qty. 1 Second-hand Aluminium Extrusion Press Lines (Pos. 2-1, 8-2, 12-1, 12-2, 12-3 & 12-4) Pos. 2-1 - 1450 MT Press Mfc.: Yejing Force: 1450 T Type: LH Press Built: 2017 Billet: dia. 152 x 6000 mm Auxiliary Built: 2019 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 9.0 m Pos. 8-2 - 1450 MT Press Mfc.: Yejing Force: 1450 T Type: RH Press Built: 2015 Billet: dia. 152 x 6000 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 9.0 m Pos. 12 -1 – 1450 MT Press Mfc.: Yejing Force: 1450 T Type: LH Press Built: 2020 Billet: dia. 152 x 800 mm Dim.: 14 x 7.1 x 4.7 m Weight: 124 T Log length: 6.0 m Auxiliary Built: 2020 Mfc.: Jiamgsun Water Quench + Air Cooling Cooling bed: 38 m x 9.0 m Pos. 12 -2 – 1450 MT Press Mfc.: Yejing Force: 1450 T Type: RH Press Built: 2019 Billet: dia. 152 x 800 mm Auxiliary Built: ...
Palamine 80ton Upstroke Press (hot press) Platen size: 1525x1150 Daylight gap between top and bottom platen 185cm Max. temperature on platens 600 degrees Type of platen heating Electric 240V Overall footprint size 2160cm x 1525cm
pressure: 100 t throat: 325 mm stroke: 10-110 mm no. of strokes: 100 Hub/min ram - range of adjustment: 80 mm table surface area: 900x630 mm ram surface: 500x315 mm hole in the table: 325x225 mm table height: 800 mm tool hole in ram: Ø 50 mm dimensions: BxTxH mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t throat: 400 mm stroke: 6-125 mm ram - range of adjustment: 100 mm dayligth: 400 mm table surface area: 1100x750 mm no. of strokes: 60 Hub/min ram surface: 800x550 mm hole in the table: Ø 150 mm total power requirement: 14 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t
Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg
pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
10 € 
