126,770 used machines on RESALE, but how to find them? Machine Search
Tablet diam./diagonal max. 60 mm with single mould Output max. 1,800 tablets/h with single tool Infinitely variable speed Filling height max. 40 mm Pressing pressure max. 80 KN Without filling shoe, die table, discharge chute and tableting tools Contactor control, electrics new in 2009 Sold as a spare parts repository in present condition
HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...
Used High Quality Bystronic pressbrake 6-axis for a sale.
Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg
Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!
26 Mint Unused Hydraulic Cylinder Single Wheel with Tension Spring Manufacturer: Matra Frankfurt Article number 4641.00000.5700166Z Overall length retracted 345 mm Overall length extended 470 mm Stroke 150 mm Piston rod 63 mm Piston 80 mm Drauck 350 bar Input errors, errors and prior sale reserved.
Dough dividing and rounding machine Roll Press Record Semi-automatic 36-piece Parting head NEWLY revised Stainless Steel Knife NEW Dough insert up to 2100g, pieces from 20 to 70 g Output approx. 3600 pieces/hour with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm, WxDxH Used machine overhauled with 6 months warranty + spare parts service Option: Cast Plate Stainless steel platform Maintenance contract Service Package E-Box Many more TOP dough dividers in stock!
Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000
Capacity: 3.100 Ltr. Operating pressure: 4.5 bar, with test book Year of Make: 1976 Manuf.: Wabag Material: Stainless Steel, 1.4571, V4A Design: Cylindrical sthd, on 3 feet, spout with ball valve DN 25, lateral weld-on nozzle DN 65, various connections inch threads, manhole cover, slight adhesions inside and outside last use: water Height approx. 3,300 mm (with cleaning line) Diameter: approx. 1,150 mm
Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg
BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm.
Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
ATOM Beam Cutting Press Model S325 T25 Capacity load 2500kg Working width 1600mm Working depth 600mm Max. pressure 25T Daylight between platens 400mm Max. stroke 350mm Motor 380/415V KW4 50Hz Year 1995 CE marked With manual
REP Press Model V58Y10W Injection volume 1000ccm Platen size: 500 x 630 mm Year 2006 Power: 2550 kN Operating hours: 14570 Moveable traverse Fix traverse Sliding Table
Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)
Presses Manufactured by JR Dare Model PR100X2 Tonnage can be set between 20 and 100ton Platen size 16” (400mm) x 16” (400mm) Daylight 400mm. Pressure can be changed Bumps cycles platen temperature all programmable Mitsubishi controls 1x pump unit per pair of Presses Dims: 2.4m long x 1m deep x 2m high
Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.
Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500
A CNC press brake Boschert is available. Press force: 28t, bending length: 1000mm, max. sheet thickness: 10mm, tool clamping: WILA, backgauge axes: 2, stop faces: 4, repeatability: +/-0.02mm, control: Cybelec ModEva Pac/CybTouch 15. Including accessories. Documentation available. An on-site inspection is possible.
Capacity: 3.404 Ltr. Operating pressure: 2.0 bar, with test book Year of Make: 1986 Manuf.: Gresser Material: stainless steel, 1.4301 Type: Cylindrical sthd, on 4 feet, outlet with disc valve DN 40, pulled down cleaning line with fitting, pedestal hose, manhole cover last use: beer Height approx. 2,500 mm (with cleaning line) Diameter: approx. 1,505 mm Please send inquiries to: infohochholzer
Ideal for the fast packaging of small quantities of e.g. tablets Blisters are glued in seconds in just a few steps The contact pressure can be finely adjusted using a scale Format changes are completed within a few minutes The items are not thermally stressed For format plates (w x d) 480 x 360 mm With 1 format plate Purely manual operation, no electrics/pneumatics Without underbench
Ideal for the fast packaging of small quantities of e.g. tablets Blisters are glued in seconds in just a few steps The contact pressure can be finely adjusted via a scale Format changes are completed within a few minutes The items are not thermally stressed For format plates (w x d) 390 x 430 mm With 11 format plates for different blister arrangements Purely manual operation, no electrics/pneumatics Without underbench
Hot water failure Auction-ID: A1-45170-64
maximum number of results exceeded
please refine your search
30 € 
