135,570 used machines on RESALE, but how to find them? Machine Search
Used press for crown corks CALLAHAN. Very good working condition. Sizes of the sheets 896x734 mm. Short crown corks - 6,00 mm.
Diaphragm press Friz type MFP 15/27 • Cover table size (mm): 2700 x 1500
Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall ...
Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm
FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...
automatic baler Manufacturer: HSM Type: VK 42/800 Year of construction: 2002 specifications: Pressing force: 42 t Channel format: 700 x 800 mm (W x H) Binding: 4-fold horizontal Filling opening: 800 x 650 mm Drive power: 30 kW Optionally with conveyor belts
new
Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Stop: for press brake, bending machine, guillotine shear ... -Reference: M16 x 2 -Dimensions: see photos -Quantity: 2 available -Price: complete -Dimensions: 345/175/H115 mm -Weight: 4.2 kg/pc.
Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t
Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg
Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
Heating, gas and oil burners, gas burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Mertik, pressure regulator type 654 -Type: 654 -Total dimensions: 120/90/H160 mm -Weight: 0.9 kg
Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
pressure: 160 t distance between columns: 850 mm stroke: 150 mm table surface area: 850x650 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,5 x 2,5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)
pressing tool, sheet metal former, forming tool, ball forming tool -Pressing tool: ball forming tool -Radius: 50.11 mm -Hole: Ø 40 mm -Dimensions: Ø 165 x 270 mm -Weight: 18.4 kg
Specifications Maximum pressure: 9 tons Pressing force: 2.76 kg/cm² Bale size: 650x500x580 mm Power supply: 400V/4kW Year of construction: 1996 Productivity: approx. 3 bales/hr Machine is fully functional, after technical supervision.
Press 400x600 make ZDA Type 100660 manualy operated electrical heated plates Clamping force 1540 kN
Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 18 S Year of construction: 2013 Serial No.: 116398 Specifications: Pressing force: 18t Engine: 4 kW Connection voltage: 400/50 V/Hz Cycle time: 22 s Pressing time: 12 s Insertion opening: W x H 107 x 62 cm Height from floor: 98 cm Bale ejected: W x H x D approx. 110 x 70 x 70-80 cm Bale height adjustable Bale weight: 120 – 180 kg depending on the material to be pressed Machine width: 152 cm Machine depth: 95 cm Machine height: 197 cm Weight: 850 kg (Subject to errors in the technical data)
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113653 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg
used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
pressure monitor, pressure switch, pressure regulator, gas pressure regulator, dial air regulator -Manufacturer: Wilkerson, pressure regulator Dial-Air-Regulator -Type: R21-C4-L00 B -Control range: 0-3 bar / 0-40 psi -Inlet pressure: max. 21 bar / 300 psi -Dimensions: 81/68/H103 mm -Weight: 0.9 kg
Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m
trolley -Simple bucket -Flat press -2x shelves for microfiber mops
automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side
Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data
Pressure control valve, pressure control directional valve -Manufacturer: Festo, pressure regulator valve -Type: LR-D-MINI -Operating pressure: 0-16 bar -Pressure: max. 16/12 bar, see photo nameplate -Number: 3x valves available -Price: per piece -Dimensions: 110/80/H95 mm -Weight: 0.5 kg/piece
Pressure control valve, pressure control directional valve -Manufacturer: Festo, pressure regulator valve -Type: unfortunately without type designation -Operating pressure: 0-16 bar -Dimensions: 120/100/H95 mm -Weight: 0.4 kg
Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355
Pressure regulating valve, pressure regulating directional control valves -Manufacturer: Festo, pressure regulating valve -Type:MS4-LR-1/4-D6-AS -Operating pressure: 0-7 bar -Number: 5 valves available -Price: per piece -Dimensions: 100/85/H120 mm -Weight: 0.4 kg/pc.
Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s
Extraction system / briquetting press Extraction system 11 KW Briquetting press 7 KW
Pressure regulating valve, pressure regulating directional control valves -Manufacturer: Festo, pressure regulating valve -Type:MS4-LR-1/4-D7-AS -Operating pressure: 0-12 bar -Number: 7 valves available -Price: per piece -Dimensions: 140/100/H80 mm -Weight: 0.3 kg/pc.
Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Foot pedal: with pressure switch -Pressure switch: Type ZE55131 Art.no. 63.015 -Number: 6 foot pedals available -Price: per piece -Dimensions: 310/280/H330 mm -Weight: 3.9 kg
pressure: 20 t throat: 185 mm stroke: 100 mm table surface area: 380 x 350 mm dayligth: 250 mm table height over floor: 840 mm total power requirement: 4 kW weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg
Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm -Weight: 3.6 kg
Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg
Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000
Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg
Pressure testing device, measuring device -with trailing-pointer -Max. pressure: 20 bar -High-pressure hose -Dimensions: 400/160/H200 mm -Weight: 4 kg
SPECIFICATIONS: 01 Hydraulic press ORMA LS/R-45/13 Dimensions: 4500 x 1300 mm 08 Piston Ø 70 mm 02 Piston with rack-and-pinion plunger Stroke: 200 mm 01 Loading roller conveyor 4500 x 2200 mm 01 Unloading roller conveyor 4500 x 1300 mm (with stop) ACCESSORIES: 01 Generator HF with 40 Kw 01 Double roll gluer 01 Manipulator ELEPHANT 200 kg Length: 4000 mm
The filter press was revised and checked by our workshop in 2023. Machine name: Chamber filter press Manafacture: Passavant Type: AX1200 Year of construction: 1989 / 2023 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Approx. 2200 litres Procedure: Closed Filter area: Approx. 155 m2 Plates format: 1200 x 1200 mm Number of plates: 62 Panel material: Polypropylene Plate transport: Automatic Plate package length: Approx. 4200 mm Cake thickness: 30 mm Dimensions: L 7600 x W 1600 x H 2250 mm Note: Workshop revised in 2022 Accessories: A control cabinet and a hydraulic system Condition: Used good Price: On request
maximum number of results exceeded
please refine your search
