panel pres used for sale

SPECIFICATIONS: Workspace: Horizontal cutting length mm: 6000 Vertical cutting height mm: 2200 Workpiece height mm: 78 Saw blade diameter mm: 300

Synchronism Panel SICES 2000A 4P

Size approximately 67x28xH109cm.

Key not present

Total size 58x22xH68cm

Total size 58x22xH68cm

Key not present

New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm

Rotational speed: 5400/min.

Technical details on demand.

Cutting length: 4400mm, cutting width: 2200mm, working height: 950mm, blade projection: 107mm, main motor power: 13.5kW, length: 11,144mm, width: 7144mm, weight: 7.5t, with documentation, without accessories or spare parts, the machine is located in Romania.

Max. cutting depth: 80mm, cutting area: 5300x2200mm, length: 6665mm, width: 3015mm, height: 1810mm, weight: 840kg, with documentation.

Saw blade diameter: 290-303mm, max. saw blade speed: 4750/min, connected load: 4.4kW, on-site inspection is possible.

X-travel: 3680mm, y-travel: 2040mm, z-travel: 1000mm, number of drilling spindles: 9, number of tool slots: 32, weight: 6.5t, operational hours counter: ca. 33,000h, the machine is slightly damaged.

I sell a panel dividing saw Paoloni Fimal Concept 350. Built in 2016. Cutting length 3200mm. Cutting height 95mm. Saw blade swivel 0-45° Main motor 5,5kW MOTEK Combined area W.4000mm x D.3000mm 3 pcs. Parallel posizionaire with double posizion regulazion for short or wide dimensions. 2 pcs. Posozionary manual on the additional rear stop 2 pcs posozionary left manual with digital display 2 posozionary on the angular stop Very good condition. Available the same. Incl. full documentation and CE certificate.

Available in stock 5 x Used Capstone Display Panels. Most commonly used for Microturbines C60 and C30. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Monitor with control panel, 2TT1001KAN03C, Unipo, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Consists of: - Monitor 2TT1001KAN03C, - Operator panel 7BXCTRLP000B, - bezel 7FPX0995X500, Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

The scope of delivery includes: 88x steel panels, used Manufacturer: SSI Schaefer Material color: hot-dip galvanized for frame depth: approx.: 1,000 mm Width: approx. 298 mm Height: approx. 55/40 mm Material thickness: approx. 1.00 mm Weight / pcs.: 4,11 kg Note: The unit price is only valid for Purchase of at least 88 pieces (1x pallet)

The scope of delivery includes: 07x steel panels, used Manufacturer: SSI Schaefer Material color: hot-dip galvanized for frame depth: approx.: 1,000 mm Width: approx. 298 mm Height: approx. 55/40 mm Material thickness: approx. 1.00 mm Weight / pcs.: 4,11 kg Note: The unit price is only valid for Purchase of at least 07 pieces (1x package)

Vertical band saw PEHAKA - Petzing & Hartmann Kassel Type SLA 8 Masch. No. 39150 Year of construction 1995 Projection in width 780 mm Table size (work table) 1500 x 600 mm Hydraulic table movement 500 mm Table height 1080 mm Projection in height max 475 mm Table load max. 500 kg Roll diameter 800 mm Band saw blade dimension 6300 x 32 x 1.2 mm Belt speed 1400 m/min. Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Working table with 13 T-slots for clamping - hydraulic table movement 500 mm - infinitely adjustable feed speed via throttle valve 0-3000 mm /min. - 2x suction nozzle in the machine stand- hydraulic power pack permanently installed at the bottom of the machine stand - operating instructions, electrical plan, hydraulic plan available Space requirement L x W x H 2200 x 1500 x 2820 mm Weight 2000 Kg very good condition; used

Cutting length 4500 mm Pliers slide depth 4500 mm Saw blade projection 95 mm Gate valve 1-60 m/min Motor 9 kw Scoring motor 0.75 KW/1PS Machine cuts in format4 sides

Vertical panel saw with pliers Cutting length 5200 mm Cutting height 2200 mm cutting depth 70 mm Saw blade diameter 300 mm Scoring unit incl. adjustable Automatic sliding erost

LIPS MARINE PROPULSION SYSTEM ENGINE CONTROL PANELS, Part No: 1627, LIPS , CONTROL PANELS ARE IN STOCK AND CAN BE SUPPLIED. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

specifications: Spindle diameter 200 mm x-axis: 6000 mm y-axis: 3150 mm z-axis: 2000 mm w-axis 1600 mm Table size: 2000 x 2000 mm Table rotation 360° Tool holder: ISO:50 Spindle speed: 2 - 800 rpm. Equipment / Accessories Digital Rotary table 2000 x 2000 mm Ball screws Clamping platens Carrying sleeve Telescopic cover Angle milling heads Tools & Tool Holders clamping devices, clamping blocks, Tool cabinets with contents Clamping angle etc. The scope of delivery includes a lot of accessories, tools, tool holders, c ...

Inv. Num. : 5480 Type: W 160 G Producer: ŠKODA Created: 1978 Parameters: Control System: MEFI Spindle drive power: 55 kW Minimum spindle speed: 2 1/min Maximum spindle speed: 800 1/min Mechanical feed length axis X: 6000 mm Mechanical feed length Y-axis: 2500 mm Mechanical feed length Z-axis: 1250 mm Maximum feed rate X-axis: 3200 mm/min Maximum feed rate Y-axis: 3200 mm/min Maximum feed speed Z-axis: 3200 mm/min Cone: M 100 Spindle diameter: 160 mm Maximum excavation depth: 1600 mm Spindle extension: 1250 mm Base size: 8000 x 5500 mm Travel of the stand on the bed: 6000 mm

CNC control in the control panel / machine operator terminal CNC web control FANUC type A14B - 0048 - 0002 Year of construction: 1990- Machine control panel - electronic handwheel - Flexible silicone PC keyboard Dimensions WxHxD: 600 x 260 x 350 mm Weight: approx. 40 kg From stock, function not tested, ideal as spare parts carrier.; used

Control panel fire alarm center GE-1X-F2-04 for sale, with original packaging

We offer various transfer panels for sale. Our transfer panels are made of stainless steel and equipped with butterfly valves, of course food-safe. Partially equipped with sensors. Currently still in stock: 2x DN80 and 1x DN65 The transfer panels were most recently used in the dairy industry.

Combination of Lot nos. 221, 222, 223, 224, 225, 227, 228, 229 and Rails Complete Panel Line in 32 Bay Combination of Lot nos. 221, 222, 223, 224, 225, 227, 228, 229, and Rails Lot 221 PLATE JOINING MACHINE SIMTECH Lot 222 BUTT WELDING MACHINE SIMTECH Lot 223 BUTT WELDING MACHINE SIMTECH Lot 224 Chain conveyor SIMTECH Co. Ltd Lot 225 PLATFORM SUBST. FOR HULL SHOP A/B CUTTING MACHINE Lot 227 LONG FIT-UP MACHINE SIMTECH Lot 228 LONGI WELDING MACHINE SIMTECH Lot 229 Chain Conveyor SIMTECH Co. Ltd Rail span - 27 M Rail 1 - 295 M long Rail 2 - 298.7 long

Siemens Simatic MP277 10" Touch Panel 6AV6 643-0CD01-1AX1 + Memory Card

Siemens TP 177 B 6AV6642-OBA01-1AX16AV6 3 pieces à 500,00 Euro

Very robust and easy-to-use machine for dividing panel-shaped wood-based materials. - welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - long middle support on optimal Height - Fixation for vertical and horizontal cut - Two scales for adjusting the Cutting width for horizontal cutting - Powerful, low-vibration motor Cutting length horizontal mm : 4.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 5.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 5300x2750 mm

- Self-supporting, firmly welded, torsion-resistant saw frame with hardened guides - TRK2 Automatically evasive aluminium slatted frame with plastic pads - 17-fold roller support with 3 brake pedals - 5.15 m long, split center support - Stable, durable saw bar construction - Powerful, powerful engine - Supersilent system to dampen engine noise - Electromagnetic motor brake - Cutting area 5300 x 2240 x 80 mm Incl. small parts support made of wood over the entire length of the machine and set for free-standing assembly

Control Panel, Machine Control Panel CMB TD35/250 2x Handwheel: PEPPERL+FUCHS Type TRD-J500-RZ Part No.: 15284 spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 485 x 400 x 125 mm

Control panel, machine control panel, with swivel arm NOMOCO VSR5-230-CNC7 Control / Display: BWO type CNC 920 < -br />Monitor: 215 x 165 mm Control housing: RITTAL A 1558 Dimensions ( with handles ): 950 x 630 x 250 mm Swivel arm: Length: approx. 2000 mm cross-section: 160 x 80 mm mounting flange: 175 x 165 mm used, tested ! Dimensions ( transport ): 1250 x 1200 x 1350 mm

Control Panel, Machine Control Panel CMB TD35/250 Type NUM 750 Monitor: NUM TFT8,4 35008995 Monitor is defective spare part for lathe CMB TD35/250 !, among others used, checked ! Dimensions: 485 x 400 x 125 mm

Control Panel, Machine Control Panel CMB TD35/250 Display Speed: 0 - 6000 rpm Display Current: 0 - 60 A instrument size: 92 x 92 mm spare part for lathe CMB TD35/250 !, among others used, tested ! Dimensions: 320 x 210 x 55 mm

- welded, multi-braced, Construction - Support rollers braked - Slatted frame with wooden overlays - Powerful, low-vibration motor Cutting length horizontal mm : 5.300 Cutting length vertical mm : 2.200 Cutting depth mm : 80 Machine length mm : 6.300 Transport heightmin mm : 2.550 Saw blade diameter mm : 303 Dimensions LxH : 6300x2990 mm

Electrical panel with power distribution switches to machines.

Control panel, control panel, control unit SIEMENS Sinumerik Push-Button Panel PP012 6FC5203-0AF24-0AA0 24 V DC 20 W used, tested ! Dimensions: 480 x 150 x 160 mm

Meter panel 35 / 320mm with rear panel HAGER Z06R 50018 400 V AC 63 A IP30 New ! Dimensions: 680 x 200 x 150 mm

Control panel CLOOS Mini-MAG Order No.: 412 70 00 00 Year of construction: 1987 with approx. 4.5 m cable used ! Dimensions(without cable): 310 x 165 x 120 mm

Touch Panel, Touchscreen Display, Control Panel AUTOMATIONDIRECT EA7-S6C ( EA7S6C ) 06511B002 Display diagonal: 6 inch 24 V DC 11 W used, tested ! Dimensions: 205 x 170 x 55 mm

Control panel, electronic module SEIBU Control panel EW 600 ( EW600 ) spare part for SEIBU EDM machine EW 600 J ! used ! Dimensions: 355 x 95 x 55 mm

Touch Panel, Touchscreen Display, Control Panel AUTOMATIONDIRECT EA7-T8C ( EA7T8C ) 06X16B011 Display diagonal: 8 inch 24 V DC 15 W used, tested ! Dimensions: 280 x 225 x 55 mm