panel pres used for sale

Pressure differential pressure switch -Type: QBM81.B -for flow and filter monitoring in air ducts -Setting range: 50...500 Pa Technical specifications: -Switching difference: adjustable -Output: EPU 250 V, 1(0.5) A -Weight 0.2 kg

Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg

Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

System for pressure increase or constant pressure maintenance, e.g. for the fresh water inlet of bottle washers 1.5 m³ stainless steel tank with frequency-controlled pump (see pictures for performance) Level control

Auction-ID: A3-46126-11461

Belt filter press The machine consists of a completely closed, strong sheet steel housing with synthetic resin coating, the lower part of which is designed as a filtrate collection basin.

Battery charger, 2 batteries and 6 press jaws. Auction-ID: A1-49407-28

1 battery and 6 press jaws. Auction-ID: A1-49407-29

Battery charger, 2 batteries and 6 press jaws. Auction-ID: A1-49407-27

Pangas Ar/CO2 pressure gauge cylinder pressure reducer. The contents of this lot come from a dissolved gastroenterological practice in Switzerland and have already been professionally removed and transported to a warehouse in Germany. The sale is EXW / ex warehouse Germany. Packaging, loading, transport and, if necessary, export processing are the responsibility of the buyer. The collection must take place within the specified time period. In the event of late or non-collection, additional costs may arise for storage, handling, dismantling or re-provisioning. These must be paid by the buyer before collection. For data protection reasons, individual areas, advertisements, labels or documents may have been made unrecognizable in the images. Medical devices are offered second-hand. The buyer is responsible for having all technical, hygienic, regulatory and safety-relevant tests requir ...

batch of pressure gauges including container Auction-ID: A1-50076-131

pressure:63 t throat:350 mm stroke:400 mm dayligth:650 mm total power requirement:8 kW weight of the machine ca.:4 t dimensions of the machine ca.:3 x 1,9 x 2,7 m

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton

Ø 100, class 1.6 0 - 25 bar Version: Vertical Display range: 0 - 25 bar Scale graduation: 0.5 bar Materials: Housing 1.4571, measuring system and connection, viewing panel multi-layer safety glass Connection: 1/2'' bottom (AB) Plate spring pressure gauge

Screw press for cold pressing of oilseeds - Manufacturer: Reinartz - Type: AP 10/06 - Power: 7.5 kW - Processing capacity (rapeseed): 100 kg/h - Processing capacity (other oilseeds): 70 kg/h - Length: 1900 mm - Width: 600 mm - Height: 1100 mm - Weight: 900 kg

Single column pneumatic press, hydraulic press PAUL ANTON type PVT 2Pneumatic table press, embossing pressFabr. No. 97148 Year of construction approx. 1980Compressive force: 10 tonProjection: 100 mmPlunger stroke: approx. 25 mmPlunger surface: 32 mmTable size: 250 x 220 mmTable opening: 53 x 53 mmTable height: 1060 mmInstallation height: 155 mm- very stable construction- Hydro-pneumatic press with pressure transmission air on oil- pneumatic foot switch- Plunger with internal thread M12- Metal substructureSpace requirement L x W x H 850 x 620 x 1560 mmWeight

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height

Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm

Single column - eccentric press KRUPP type PEKRD 125 hMasch. No. 2861 Year of construction 1977Compressive force 125 ton. Projection 400 mmTable size 950 x 750 mmPlunger area 800 x 540 mmTable opening 100 x 250 mmStroke adjustment 8 to 160 mmPlunger adjustment 100 mmInstallation height largest stroke at the top max. 550 mmStroke rate 60 strokes/min. Table height above floor 800 mmEngine power 10 kWNetz connection 380 Volt, 50 Hz- Hydraulic overload in the plunger- Compressed air clutch-brake combination ORTLINGHAUS-

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil

Pneumatic toggle press, pneumatic press SCHMIDT type 34-12Fabr. No. 400160-03 Serial No. 0028 Year of manufacture 2008Compressive force 28 kN = 2.8 ton. Throat depth 130 mmPlunger area 63 x 36 mmPlunger stroke 12 mmPin hole 20 mm with clamping screwCompressed air requirement 2 to 6 bar- Stroke length infinitely variable via adjustable fixed stop for the upper end of stroke position- Fine adjustment for lower end of stroke position with scale 1 tick = 0.05 mm- Stroke triggered via pneumatic valve, triggered by material insertion- Press stand 45 off

Mäder DLP 1700 HV Direct Acting Air Press Press Direct-acting air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing pins, bushings and ball bearings or when forming. DLP 1700 HV Direct-acting compressed air press Compressive force at 6 bar: 17 kN Working Stroke: H mm: 40/60/80 More items - new and used - can be found in our shop! International shipping costs on request!

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Equipment: Overpressure,Manufacturer: W. Ortmann,Condition: used,Volume: 6,000,Max. overpressure: 8.0,Design: lying,Base: feet,Number of feet: 4,Diameter inside: 1,580,Cylindrical length: 2500,Total height: 1,900,Total length: 3,500,Wall thickness floors: 5,Wall thickness cylinder: 5,Technical documents: Drawing, Acceptance certificate,Type plate: Yes,Outlet: DN40 DIN 11851,Note: slight adhesions,Remarks: 1 oval manhole (approx. 420 x 320mm) in the front floor Information in the drawing different loose fittings in the tanks were not correct for the cylinder length (were not correctly installed when the

Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

For sale is an 800 to step press. Technical data see photos. Press we sell from location.

Press has made about 2,7 million peaces so far, and large factories make over 10 million pieces with these machines. The maximum theoretical diameter of the pieces is 380 mm, production-wise max. 320 - 340 mmfinished size. Depth 110 mmfinished measurement . Speed: small objects 300 - 350 pcs/h large ones 120 - 160 pcs/h. Between 2004 - 2010, less than 2 million pieces were driven on the Press, and after that the demand for the products has degreased and today it is driven only a few hours a week, sometimes the press stands unused for a couple of weeks.

Movable cylinder Auction-ID: A1-40982-159

1 battery charger, 2 batteries and 9 press jaws. Auction-ID: A1-49407-30

With RO BC 14/36 EU charging station and 1x 18V Li-ion battery. Auction-ID: A1-50632-346

Brand: BLUM Model/Reference: M51P1000 (Plate Reading) Type: MINIPRESS Year: 2000 Serial number: EA 03917 Use: drilling and mounting furniture fittings Suitable for drilling hinges, mounting plates and other fittings Pneumatic feeding/drilling on this machine family Power supply: 3 × 400 V Frequency: 50/60 Hz Amperage: 2.85 A Control circuit: 230 VAC Indicated weight: 37.8 kg CE marking Machine mounted on its equipment/work stand Several accessories and adjustment elements visible in the photos Contains 16 stops Defect: The 2 bars are missing to hold the stops Auction-ID: A3-46129-35226

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1350 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2000 mm Slide area: 3500 x 2000 mm Die cushion capacity in table: 150 ton Die cushion stroke: 200 mm Die cushion pad area: 2700 x 1500 mm Number of strokes: 7 - 21 s.p.m. Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Required power: kW Height over floor approx.: 8600 mm Weight of machine approx.: 250 ton

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately