pan mixer used for sale

grinding band dimension: 150 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 105 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 33 m/sec engine output: 3 kW Motor speed: 2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Pannkoke 7011 CeDe is a vacuum lifting system for glass and similar materials. It is designed for the safe and flexible internal transport of heavy sheets. Below you will find the key specifications. ⚙️Main technical data Type: Vacuum lifter Year of construction : 2001 Serial number : 2001/ 2184 01 Vacuum circuit: o 1-circuit system with vacuum tank, check valve, vacuum switch and vacuum gauge o Closed circuit prevents vacuum loss in the event of a power failure o Acoustic signal when there is insufficient vacuum o Vacuum generation: o Built-in low-maintenance vacuum pump (dry running) Battery-powered, with quick-change system (battery change < 1 minute) o Charger for second battery (110–230 V, 50/60 Hz, 1 phase) o Operation: o On/off directly on the device o Suction/release via remote control o Suspension: 2-fold crane suspension, rotatab ...

New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A., Completely wired, 2 units available; Gross weight [kg]: 35

USED PANDA WV 1000 C 0EC ZZTZ BUSCH VACUUM PUMP

Ice cream sales counter Proget G. Giola Pann 12 E -Ice cream counter of Ital Proget Cold Refrigeration S.A.S. -Model: Vetrina G. Gioia Pann 12 E -230 volts -1.41 kW -Year of construction 06 / 2015 -Outer dimensions: Width: 112cm Depth: 96cm Height: 125cm

Offer Heinzmann Pandaros for sale.

Berief Bratt pan Serial: 7228 Stainless, 130l bratt pan, thermo oil, up to 260'C, manual wheel to discharge, with digital controls and timer, 3Ph

Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

Vacuum lifter, vacuum lifting device, vacuum suction device, plate lifting device, vacuum lifting frame, suction plate, suction device -Manufacturer: Pannkoke, vacuum cleaner No. 388 -Diameter: 290 mm -Number: 1 piece -Dimension: Ø 290 x 50 mm -Weight: 1.6 kg

Panasonic NE1880 Microwave Stainless Panasonic pro II microwave, programmable controls, clear digital display, 16 programmes, capacity 44l, 1800W, 1Ph (11 in stock)

Gear motor electric motor -Speed: 21 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 390/270/H210 mm -Weight: 17 kg

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

cable tie fastening, cable tie holder, multiple fastening strip -Manufacturer: Panduit, cable tie fastening cable tie holder -Type: MTP series -Number: 167 holders available -Price: per piece, minimum order 20 pieces -Dimensions each: 130/16/H5 mm -Weight: 0.005 kg/piece

cable tie fastening, cable tie holder, multiple fastening strip -Manufacturer: Panduit, cable tie fastening cable tie holder -Type: MTP series -Number: 82 holders available -Price: per piece, minimum order 20 pieces -Dimensions each: 91/16/H5 mm -Weight: 0.005 kg/piece

housing screw connection, screw-in screw connection -Cable gland: 2 pieces -Type: LMZ 27.9-127-G1 -Price/Delivery: complete -Dimensions box: 115/110/H65 mm -Weight: 0.2 kg/piece

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

Telecommunications system, telephone system -up to 20 extensions -Especially suitable for small offices

Constant, oscilloscope -220 V 40-60 Hz -Dimensions: 245/270/H185 mm -Weight: 8 kg

Record Panda1000 flow wrapper Serial: 300376 flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph

Old bread blender/breadcrumb mill, radio/

Manesty coating pan 150Kg coating pan, copper pan, 3Ph

Bread roll line Dough sheet line for angular and elongated products Dough feeding belt Pre-portioner Head machine incl. div cutting rollers with baguette long-knitting station - Incl. 2 knitting drums (1-r long + 2-r short) with stump station - incl. 2 diamond stumblers / + // or average Humidification and sprinkling station Year of construction: 2017 - With intermediate belt and lattice belt immersion bath - simple sprinkling station with 2 seed containers (coarse/fine) Deduction - 4x60/40 or 2x60/80 planks or sheets Disassembled, not overhauled or cleaned from the Rottenburg warehouse immediately available in bakery condition

Firex Boiling pan Stainless, 150l boiling pan, adjustable temp controls, auto refill, side bottom discharge, 3Ph

The scope of delivery includes: 01x Particleboard/ flooring for mezzanine floors, new Manufacturer: UNILIN Division Panels Year of construction: March 2023 (new) Dimensions: approx. 2,600 x 1,020 mm (WxD) Particleboard thickness: approx. 38 mm Design: P4, grooved all around Weight / piece: approx. 65.50 kg Panel size: approx. 2.65 m² Colour top: raw Colour underside: white Note: - The chipboard is as good as new. Due to the storage, dust deposits may be present. - The chipboard does not have a spring. These are picked separately. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

ID3763 Sandvik Pantera DP1100i Year of construction 2014 approx. 11.060 hours/hours Blasting hole drill rig, with rod changer, cab with safety grille, radio, roller blinds for cab windows, TIMi – rig alignment instrument, hydraulic tail supports, central lubrication system, all servicing carried out by Sandvik, good condition, the last hammer service was carried out 300 operating hours ago & the last safety inspection in January 2026. Blast hole drilling rig, with rod changer, cab with protective grille, radio, roller blinds for cabin windows, TIMi – carriage alignment instrument, hydr. Bottom supports at the rear, central lubrication system, all service done by Sandvik, good condition, the last hammer service was carried out 300 hours ago & the last safety inspection in January 2026

Cooling capacity: 40 kW (27/19°C - 35°C) Heating capacity: 45 kW (7/6°C - 20°C) Year of manufacture: 2017 Type of refrigerant: R410a Number of fans: 1 pc. Compressors: 2 pcs. Copeland (scroll) Dimensions: 1.84 x 1.18 x 1.00 m Weight: 315 kg Condition: Excellent

Working width: 630 mm Working height: 3 - 250 mm Motor output: 7,5 kW Feed speed: 7 und 14 m/min. Dimensions (length / width): 2700 x 1700 mm weight: ca. 1.450 kg Dust suction hood: 2 x 160 mm COMBINED PLANNING AND THICKNESSING MACHINE 546|100 Manufacturer description Solid German mechanical engineering Convenient planing and thicknessing without machine conversion, dimensionally stable and precise dressing tables, as there is a folding up omitted, for planing widths up to 630 mm and dual operation up to 315 mm each PANHANS solid steel cutter block with 4 Tersa reversible knives SURFACE PLANE: Table length 2555 mm, planed with toothed table lips Electromotive adjustment of the feed table via button with digital display the chip removal max. 5 mm Dressing fence can be inclined up to 45°, in an extremely smooth-running steel guide stored Dressing ruler, anodised, with swiveling auxiliary  ...

Table dimensions: 1100 (2300) x 760 mm Motor output: 7,5 kW Spindle diameter: 30 mm reus: 1500 - 10000 U/min Weight: ca. 880 kg Panhans swivel milling machine 245|200 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Stepless speed regulation 1500-10000 rpm Engine power 7.5 kW (10 hp) Net weight approx. 880kg Technical description: 7 touch control, optionally usable, top and below 7 capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display ( ...

Panasonic Inverter U-100PE1E8A Air Conditioner Outdoor Unit with 2 Pcs Panasonic S-50PU2E5A 4-Way Ceiling Cassette for Cold and Heat Cooling power: 10 kW Heating power: 11.2 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Panasonic Inverter U-200PE2E8A Air Conditioner Outdoor Unit with 4 Pcs Panasonic S-50PU2E5A 4-Way Ceiling Cassette for Cold and Heat Cooling power: 19.5 kW Heating power: 22.4 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Formats: Minimum Book Size: 114x120mm, Maximum Book Size: 268x369mm, Minimum Book Thickness: 3mm, Maximum Book Thickness: 40mm, Mechanical Speed: 3600 Cycles/Hour, 16 Stations Müller Martini 1541 Gathering Stations With Hand Feed And Criss Cross, Spiral Raceway, Connection to Binder, 9 Clamp 1530 Binder, Cover Feeder, Milling & Roughening, Hotmelt Spine & Side Glue, Premelter, Pressing Station Year of Construction: ca. 1997

Technician vice PANAVISE Jaw width 63 mm Wingspan approx. 60 mm Machine Base - Vacuum Plate swivel 90° Rotatable 360° Weight approx. 1 kg

Siemens Sicomp Pc 32-C Operator Panel

Swivel spindle milling machine Brand: Panhans type 245 10 New machine Technical data: Engine power: 5.5 kW / 7.5 hp table size: 1100 x 760 mm table height: 870 mm clamping height: 140 mm height adjustment: 140 mm speed: 3000 / 4500 / 6000 / 9000 rpm space requirement: 1145 x 1180 mm Net weight: approx. 800 Table milling machine with double-sided swiveling fixed milling spindle for the swiveling range from -5° to +45,5°. handwheel adjustment with analog dial gauges Belt quick tensioning device Electr. speed indicator Left and right rotation cutter quick clamping device fine planed cast iron table with rigid frame support Milling stop 215 total adjustment via handwheel incl. multiplex stop plates mechanical motor brake milling protection and pressure device GAMMA V 1629 curved milling fence 1639 Tapoa

Manufacturer: Pankoke und Kochsiek, Type: BFA 03, Year: 1988, Drilling supprt from bottom: 3, Groove saw: 1x Horizontal<CRLF>1x Vertikal, Year :1988

Manufacturer: Siemens, Type: updaters Panel, Serial number: 5703069001, Systemconfiguration: Fert.724, Serial number: 5482557102,

Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,