palletizer robot used for sale

Repair and Exchange service Reparatur und Austausch Service YAMAZAKI MAZAK GANTRY CONTROL UNIT MAIN BOARD A 7780001001 A-2 Through our Mazak machine simulators, we are able to use almost ALL Mazak Mitsubishi GANTRY CONTOL UNITS under load to test. Long-term tests are also possible. We repair your GANTRY CONTOL UNIT at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

2 KR C2 robot arms with KCP2 controller. Of these, one system is complete and operational and will be in use until October 2023. There is a factory warranty for the control system with a remaining term of 20 months The other serves as a spare parts donor. The system is replaced by the successor and is fully functional.

ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

6 axes Load capacity 120 kg

number of controlled axis: 6 workpiece weight: 210 kg throat: 2697 mm total power requirement: kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1x Linear robot Reis RL80-13 incl. 2 control cabinets absolutely mint condition Year of construction 2009 there are 2 robots on each beam, a two-axis robot and a three-axis robot the system is dismantled, complete with control cabinets the glass gripper and the Zimmermann & Schilp non-contact glass lifting system are not part of the range of products there are 2 of these double robot systems available incl. loading

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kg Technical description : KUKA Robot Pedestal with drilling pattern for Kuka robot KRC2. KR 210 robot was mounted. Total height 1200 mm.

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

ID2524 Pikomat Palletizer/Palletizer Universal palletizer, (stacks filled bags on pallet) Universal palletizer, (stacks filled bags on pallet)

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Used pipetting robot Tecan EVO 150 with Tecan dongle and CDs and accessories .

Used Tecan Freedome evo 200 pipetting robot with TE-MO 3/5 Pictures will follow

This COMAU C4G NH4 – 200 robot arm was manufactured in 2004. It is part of a set of 4 refurbished industrial robots, fully serviced and in excellent working condition. These units have been mechanically and electronically overhauled, ensuring reliable performance. Ideal for automation, assembly, or handling applications. Contact us for more information about this machine.

Inv. Num. : 7264 Type: MA2010 Producer: Yaskawa Created: 2019 Parameters: Maximum arm reach: 2010 mm Maximum load capacity: 10 kg Control voltage: 3 x 400V AC 50 Hz Network Type: TNC-S Components: Controller DX200 Master Welding source Lorch S8 RoboMig XT Burner cleaner BRG2000D 2x Positioner DK-2500-R1000 Servo Rails FB500

Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach radius: 3.2m Handling Weight: 130kg Year of construction: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator. Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach Radius: 3.2m Handling weight: 130kg Year of manufacture: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator.

Drawer module Transfer and centering module Interchangeable 2-point double gripper standard Robot Cell Data: Dimensions (L x W x H) 2500 x 2000 x 2373 mm Dimensions: 5000 x 3000 mm Operating voltage: 3 x 400 V, 50 Hz Control voltage: 24 V DC Power consumption: max. 1.5 kVA Technical data robot control: Type: FS100 Dimensions (H x W x D) 470 x 200 x 420 mm Cooling system: indirect cooling Interface: USB interface (2.0), RS232C and LAN (100 Base-TX710 Base-T)

WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST WE CAN DO IT WITH ADDITIONAL OFFER

- Robot Kuka KR 8 r1420 arc HW AS NEW CONDITION - controller KR C4 compact Mmxwykv - custom metal base This KUKA KR 8 R1420 arc HW robot was manufactured in 2016. Originating from Germany with a load capacity of 8 kg and a reach of 1421 mm, it weighs 179 kg and is powered by the compact KR C4 controller.

FANUC M-710iC/70 robotic station for laser cutting and welding was built in 2017. The offered station is complete and includes the following components: – FANUC M-710iC industrial robot – IPG YLS-4000-S2T fibre laser source – FANUC SYSTEM R-30iB controller – 2-position rotary table with horizontal rotation – 2-axis L” type positioner – semi-automatic head changing system – HIGHYAG BIMO-FSC laser cutting head – IPG Photonics FLW-D30 Vertical oscillating laser welding head with HD camera – KLIMAWENT UFO-4-M/N-1/R filtering system – wire feeder (4 reels and equipment for 0.8 mm and 0.6 mm wire) – portable teach pendant FANUC A05B-2255-C101 – control system – metal construction with cabin Laser machining of workpieces is performed by a specially designed FANUC M-710iC/70 robot arm, distinguished by the best permissible load and inertia in its categ ...

Incl. control and control panel Axles: 6 Hand load capacity 16 kg

ID3381 Piehler HPS-H year/Year of construction 1995 Palletizing machine, State-of-the-art control system (S7), new drum motor on the infeed conveyor, the latest generation of safety light barriers and a new control panel, as well as new mechanical and electrical documentation (circuit diagram) Palletizing machine, state-of-the-art control system (S7), new drum motor on the feed belt, the latest generation of safety light barriers and a new control panel, there is also a mechanical and electrical documentation (circuit diagram on the latest version)

CMA 5-axis painting robot mod. ROBY 5EX-R - used - N. 5 controlled axes - N. 3 supports - Wrist capacity 3 kg - Self-learning programming -Merry-go-round Number of arms 3 Single arm capacity 25 kg - Workpiece Wheel Servo movement controlled and synchronized - Complete with manual and CE declaration - RETROFIT 2024 (NEW OVERHAUL)

number of controlled axis: . workpiece weight: 150 kg throat: . mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Robot, Stäubli TX90 Lbmn, with control CS8C control panel and accessories – used - : Price from location: 14.250.-€ (net) Manufacturer: Stäubli Type: TX90 Year of Make: 2011 Machine No.: F11/5G1VB1/A/01 Weight: 113kg Payload: 5kg Condition: good Available: immediately Location: Frankenberg camp / Saxony

plus A-C servo axis only 3 year old, not used payload 5-7 kg with A-C payload 20 kg without A-C - Stroke (Z): 3.500 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Driving method: plus A-C servo axis

- RC200 integrated - drive package multidynamic - 1 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

- Pneumatic axes - Gripper rotation: 90 ? - Interface: EUROMAP 12 - Stroke (X): 300 mm - Stroke (Y): 1.000 mm - Stroke (Z): 1.500 mm

- RC300 integrated - drive package multidynamic - 2 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

- B axis: 0 ? -270 ? electric - C axis: 0 ? - 90 ? pneumatic - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Compatible machine: up to 350 t - Stroke (Z): 3.000 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Payload: 5 Kg - Driving method: 380 volt async

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Interface: EUROMAP 12 - Compatible machine: up to 350 t - Stroke (X): 900 mm - Stroke (Y): 1.600 mm - Stroke (Z): 3.000 mm - Payload: 5 Kg - Driv

- Tooling rotation: 0 ? -90 ? - X axis: 800 mm pneumatic - Y axis: 1000 mm pneumatic - Z axis: 2000 mm three-phase electric with inverter - Interface: Euromap 67 - Compatible machine: up to 150 t - Payload: 3 Kg

Used machine in good condition. Available for immediate delivery.

- 7 axis - Complete cell sytem working on a CNC Punching Machine - Turn table sheet device - Fully automatic loading and unloading device - Safety fence Original cost of 100.000 EUR

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Weight: 255 kg - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Payload: 10 Kg - Driving method: servo

Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg

Inv. Num. : 7724 Type: FD-V8L/FD11 Producer: OTC Created: 2019 Parameters: Accessories: Measurement Wire cutting and grinding Rotary and tilting table Head cleaning station

Inv. Num. : 8059 Type: SMART 5 NJ60-2.2 Producer: Comau Created: 2015 Parameters: Switch-on hours: 4675 h Maximum arm reach: 2258 mm Number of axles: 6 pieces Maximum load capacity: 60 kg Machine weight: 645 t Equipment: Blacksmith stand Switchgear Fencing

Inv. Num. : 8093 Type: RX170HP CS7 Producer: Stäubli Created: 1996 Parameters: Maximum arm reach: 1835 mm Number of axles: 6 pieces Maximum load capacity: 65 kg Accessories: A stand for positioning the robot Cable harness Manual Programmer RoboDK Offline Programming Software Spare parts for CS7

Robot Accessories, Mechanical Stop Axis 3 ABB 3HAC13128-1 COMPLETE MEKSTOPPSET New ! Dimensions(Package): 290 x 250 x 120 mm

Robot Cable ABB 3HAC034295.0 Manip ax1-6/MH ax1-3 cable REV.02 New ! Dimensions(Package): 800 x 600 x 300 mm

6-axis robot with controller, an associated programming device and, on request, the bagging scale shown for sale. The operating hours are probably less than 100 hours. The system is being sold because of a product change. Previously, the robot filled powder into paper bags (20kg), sewed the bags shut and palletised them. Find more here - / Contact us at -

Welding robot great working condition Find more here - / Contact us at -