We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,272 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
DIMENSIONS / WEIGHTS:. - total height:35 mm
used
DIMENSIONS / WEIGHTS:. - total height:1000 mm
used
DIMENSIONS / WEIGHTS:. - total height:1000 mm
used
DIMENSIONS / WEIGHTS:. - total height:900 mm
used
Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg
used
Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg
used
WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2700 mm
used
injection molding machine:2.500-5.000 kN demoulding stroke:650 mm max. manipulateable mass:5.000 g X-axis:650 mm Y-axis:1200 mm :3000 mm C - 90 °, pneumatic S - 15mm 2 x gripper 1 x pneumatic No separate safeguarding equipmant, must be protected by the machine! Adapter: 2 x 450mm high, 140x140mm, 535x815mm (M24) Payment terms: 100% prior to delivery
used
used
used
Welding robot make KUKA type KR 6 ARCYear of construction 2008Technical specifications:Load capacity 6.0 kgNumber of axles 6Repeatability +-0.1mmMax Reach 1823.5mmWeight around 235 KGWith- Control KR C2used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg
used
Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:210 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1267 kg
used
injection molding machine:800 kN demoulding stroke:120 mm max. manipulateable mass:1.500 g X-axis:120 mm Y-axis:500 mm :Schwenkachse mm Payment terms: 100% prior to delivery
used
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kg
used
number of controlled axis:6 workpiece weight:12 kg throat:1360 mm weight of the machine ca.:0,26 t
used
Palletizing robot for bags or similar products. Here performance at 30%
used
REIS gantry robot with substructure 1.8 m high, x approx. 10 m, y approx. 1 m, e.g. approx. 1 m 4-axis robot, very good condition, was only 4 years in operation.
used
Including welding arm SCA and control cabinet ABB (900x950x1250 mm)
used
Robotic arm for various applications
used
Arm length 1400 mm, equipped with control unit, remote control, 4.5 Kva, 400V,
used
System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h.
used
Load capacity: 10kg, weight: 245kg, with shuttle table.
used
Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg
used
With Welding Robot Fanuc ARC Mate 120iBE and Controls Fanuc SYSTEM R-J3iB Mate, including documentation.
used
Number of axes: 6, reach: 3500mm, max. load: 15kg, weight: 220kg, includes welding robot system, additional torch, 2x welding station with turning device, 1x welding station with Demmler table, 1x Cloos QINEO Champ 450 welding machine, has been regularly serviced, on-site inspection is possible.
used
- 7 axis - Complete cell sytem working on a CNC Punching Machine - Turn table sheet device - Fully automatic loading and unloading device - Safety fence Original cost of 100.000 EUR
used
Complete palletizing system for trays. The facility consists of: ABB palletizing robot, gripping tool for parcels, pallet magazine, cardboard stacker, protective device and conveyor technology
used
- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (X): 400 mm - Stroke (Y): 800 mm - Stroke (Z): 1.400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic
used
Palletizing system for sacks, trays or similar products. Kuka palletizing robot type: KR 180-2 PA Kuka was built in 2004, gripping tool and the recording tape are NEW
used
5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo
LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:15000 mm
used
- Pneumatic C 0-90 rotation - Vacuum circuits: 1 - Clamp circuits:2 - Robot support height 450mm. Including - Compatible machine: 450 - 500 t - Control: CNC 6.2 - Stroke (Y): 1.600 mm - Stroke (X): 500 mm - Stroke (Z): 2.000 mm - Payload: 15 Kg - Driving method: servo
LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:7000 mm
used
Y-travel: 1000mm, z-travel: 3800mm, connected load: 4kW.
used
Product dimensions: 150-800x120-500x80-400mm, pallet height: 2500mm, max. pallet weight: 1t, cycle time: 7.5s/cycle, with Industrial Robot Fanuc R-220iC 125L and documentation.
used
Was used for toast rolls, includes 2x pick & place robots ABB FlexPicker IRB 360 for grouping, IRC with PC processor, PC, monitor and visualization, Komatec vision system, Siemens S7, remote maintenance, operation on swivel arm, picker 1&2 suction grippers, various belts for product transport and frame with protection system.
used
Number of axis: 6, load: 10kg, weight: 630kg, with controls and documentation, an inspection is possible.
LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm
used
Number of axis: 6, load: 10kg, connected load: 5kVA, with Controls Yaskawa YASNAC XRC and documentation, an inspection is possible.
used
Number of axes: 6, reach: 3100mm, max. load capacity: 125kg, controls: FANUC SYSTEM R-30iB Plus, weight: 1.115t, operating hours counter: ca. 100h, with control system, an inspection is possible.
used
Weight: 1,155t, machine was maintained regularly.
used
Weight: 222kg, with Welding Machine HYBRID 4000M, including spare parts, machine needs official accident prevention test.
LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:24000 mm - total weight approx.:10100 kg
used
There are two identical robots available, operational hours counter: 69,335h, including controls.
used
ABB Robotics Robot Parts number electric motors : PS 60/4-50-P-LSS-3612 PS 60/4-50-P-LSS-3613 The spare part is in good condition nevertheless, this is a used items, which has slight signs of wear, or may have.
new
Abicor Binzel torch neck for robot 962.0300 Robo-WH-241 straight M6 New Stock Net amount plus 19% VAT
used
A-travel: 220°, B-travel: 270°, z-travel: 200mm, W-travel: 540°, max. nominal load: 5kg, weight: 21kg.
used
Number of axes: 6, reach: 700mm, load: 3kg, with controls.
used
Including controls, the robot needs overhauling.