pallet production used for sale

Used complete production line for yellow cheese, made by TEWES-BIS Poland. New 2019. Production line for yellow cheese, e.g. Gouda, Edam, Dutch type. Daily capacity: Processing up to 180,000 litres of milk per day. TECHNOLOGICAL SPECIFICATION (MAIN MODULES): Section 1: Preparation of cheese milk: o Milk repasteuriser with a capacity of 15 m³/h. Section 2: Preparation of cheese curds: o Cheese boiler with a capacity of 12 m³. o Hot water generator for boilers. o Process water pasteuriser (5 m³/h) with a 10 m³ tank. o Set of process pumps (whey, curd) with a capacity of 25 m³/h each. Section 3: Cheese room – Moulding and pressing: o Curd buffer tank (10 m³) with pump. o Under-mould forming device (UFP) for Dutch cheese. o Complete mould circuit (300x500x100) with cover applicator and remover. o Final pressing system: 144 pressing points. o Tunnel mould washe ...

Used SJ 50/30 filament production line equipped with an air-cooled head. Technical parameters: - screw diameter 55 mm - L/D 30, effective screw length 1500 mm - Screw rotation speed: 60 rpm - forced feed unit for raw material to the plasticizing system with a power of 1.5 kW / vertical screw system with cylinder . - Main drive motor power 12 kW - capacity approx. 50 kg/h Heating sections and power : - Cylinder 6 kW / three heating sections plus head - Head connector / mechanical screen exchanger with a power of 2 kW - Air cooling of the cylinder and head / motor with a power of 0.18 kW - Raw material: PP/PE ABS/PLA/PETG plastics Weight approx. 800 kg.

available is a complete Plant with Equipment to produce Airspring! 3 Roll Calender with line and 84" Twin Mill Bias Cutter Several Building machine several hydraulic Curing presses testing machine 3 x assembly lines Winder ...

SPECIFICATIONS: Machining length: max. 3000 mm - min. 250 mm Processing thickness: min. 30 - max. 155 mm Processing width: max. 200 mm Tenon cutting area 01 Tenon cutting unit - max. Ø 400 mm - 3 kW 01 Spigot cutter - length 600 mm - 7.5 kW - shank Ø 50 mm - 3100 rpm 01 Electronic guidance Roll forming area: I Roll forming unit - length 600 - 7.5 kW - shank Ø 50 mm - 6000 rpm II Roll forming unit - length 600 mm - 7.5 kW - shank Ø 50 mm - 6000 rpm 01 Glazing bead unit - Ø 200 mm - 2.2 kW 01 Rubber roller drive unit

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - .ucymachines/

Used mozzarella production line. New 2013. The line includes: - Tank for preliminary pressing of cheese curd - LT150 thermizer - Molds for shaping the curd - Chilled water tanks - Brine tanks - Tube heat exchanger for cooling brine Cheese curd plasticizing set consisting of: Tanks for pre-pressing cheese curd with an automatic device for cutting into small portions. The prepared cheese curd is fed into the thermizer for plasticization. The plasticized mass is manually formed into cheese molds. The portions prepared in this way, packed in molds, are cooled in an ice water tank. After cooling, they are removed from the molds and placed in brine tanks. After salting, the mozzarella blocks are sent to a ripening room with specific temperature and humidity parameters.

Qty. 1 Second-hand sandwich panel production line Line manufacturing of insulated metal panels for sectional doors (garage). Mfc.: METECNO Technology SPA; FASPAR Built: 1994 Reconditioned and commissioning: 2006 Useful working width: 500/610 - 10 mm Panel door thickness: 40 mm Sheet thickness: 0.37/0.70 mm Capacity: 1,500,000 m panels/year

Very well preserved, almost new KÄLIN grinding/planing machine. Year of manufacture 2009/2010 Type Caster IPC 6.000. Only in use for a very short time. Very well preserved, almost new machine with all engines and accessories for the production of up to max. 6 to/h of sanding wood. System complete with Siemens S 7 control, grinding equipment and grinder type Grinder SL 800 and all planer heads, along with a set of spare cutter heads. Extraction system and complete conveyor technology for chip transport. Machine professionally dismantled, ready for takeover immediately. Warehouse location in southern Germany. Viewing is possible at any time. /

Manufacturer: Kraft-Homag-Viet, Beabeitung: Rohlinge Kaliberieren-Formatieren- Fälzen und Kaliberieren, Herstellung von: Innentüren, Work piece width min-max mm: 1300 X 2200, Min.-max. workpiece height in mm: 10-60, Min.-max. workpiece length in mm: 50-2200, Manufacturer1: Bargstedt, Machine type1: Beschickungsanlage doppelseitig, Year of manufacture1: ca 2000, Manufacturer2: Viet Kalibrieranlage, Machine type2: 4 Aggregate Walze/Schuh, Year of manufacture2: ca.1998, Manufacturer3: Homag Doppelendprofiler, Machine type3: Längsprofilerer, Year of manufacture3: Überholt 2004,

Manufacturer: Weinig Ferigungsanlage, Control: Weinig, Software: Klaes Sofware, Maschinensteuerung: Übergeordnet, Programming station office: yes, Manufacturer1: Weiniig Profimat, Machine type1: Profimat 23, Year of manufacture1: 1999, FREETEXT1: 5 Spindeln, Manufacturer2: Weinig , Machine type2: Unicontrol 10-5, Year of manufacture2: 1999, Manufacturer3: Weinig Transportsytem, Manufacturer4: Weinig, Machine type4: Unitec 10, Year of manufacture4: 1999, Manufacturer5: Stähle Schleifmaschine,

PREZ-MET PVC and aluminium window production line is a state-of-the-art and comprehensive solution for the mass production of windows. The system enables complete machining of PVC and aluminium profiles within a single working cycle. The production includes all key stages – from precise profile cutting, through milling, drilling, welding to final cleaning of the elements. The PREZ MET window production center is made up of three smaller integrated production lines – one line for the production of window frames and two lines for the production of window sashes. They consist of machines from renowned manufacturers from 2005-2016: – ROTOX ZSA 263 cutting center – PREZ-MET FS 50 end milling machine – PREZ-MET 42 MP copy milling machine – PREZ-MET ZGP 420 four-head welding machine (3 pcs) – PREZ-MET ZGP 380E two-head welding machine (2 pcs) – PREZ-MET ZG 940 single-he ...

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...

Used Masa Stone Making Line Year of Make: 2001 Consisting of: - Mixing plant - Colormix - Kübelbahn - Stone paver - approx. 3600 production boards 1400x1100mm - Aerial ladder with 22 shelves - Transfer table - Countersunk ladder - Packager - Brettpuff The drying chamber is not for sale Second-hand Masa block-making plant Year of manufacture: 2001 Consisting of: - Mixing plant - Colormix - Bucket conveyor - Block-making machine - Approximately 3,600 production boards, 1,400 x 1,100 mm - Elevator with 22 levels - Sliding platform / Finger car - Descending conveyor / Lowerator - Packager - Board buffer The drying chamber is not for sale

Depositor, 2 tanks, 4 heads per tank.

Newtec 9 heads weigher with PCS system, also available with funnel

Stone Production Plant Year of Make: 1989 Board pavers from the manufacturer OMAG Simatic S 5 control system with visualization by Frima Board size 1,400 x 1,000 mm Cross cleaning Quick Forming Clamping Pneumatic Drawing plate equipment Circulation Hydraulic pawl feed with proportional valveson wet side Dumping device Lifting ladder with chain transport, 18 shelves and double pusher and collector Vehicle Group Countersunk ladder with 18 levels double joint Hydraulic Stone Remover Hydraulic Stone Doppler Chain conveyor at sorting station and pawl feed at dry side conveyor Film applicator Horizontal strapping Granule spreader Electric Packager Board cleaning brush in V-belt conveyor Board turner Board stacking device for stacking board package transport incl. board buffer; Pre board destacker buffer for 75 boards Board destacking device Board insertion wi ...

Used PP twine production line made by Roblon, type: T5000. Capacity ranges from 60 to 100 kg/h depending on twine thickness. THE LINE INCLUDES: - A 90mm diameter extruder with an inverter-controlled asynchronous motor, - A control cabinet with digital controllers, - A cast-in die head, - A longitudinal orientation oven for polypropylene rafi, - A single-reel winder, - A twister for winding finished twine balls, - A heating tunnel for shrinking the film on finished balls.

Fully automatic production line for the manufacture of FFP2 dust masks (KN95). Stable and efficient production of single-use dusk masks with FFP2 protection class (KN95) and made of 4-5 layers of material. Production procedure: Material feeding from roll (up to 5 layers) | feeding, cutting and ultrasonic welding of the nose-bridge | ultrasonic welding of the ear strap | folding and shaping of the mask | ultrasonic welding of the mask edges | punching (separating) and ejection. The tension of the feed materials can be controlled separately for each material. By changing the templates, masks of different sizes and styles can be produced. Controlled by Mitsubishi PLC, operation via Weinview touch screen. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | power: 8kW, 220V | machine dimensions L6000xW1000xH1800mm | weight: 1500kg. Video on YouTube:

Fully automatic production line for the manufacture of surgical masks. Stable and efficient production of single-use surgical masks made of 3-4 layers of material. After welding the layers on top of each other, the production for welding the ear straps is expanded to 2 lines to achieve a constant high output. PLC control, operation via touch screen. - Specifications: max. speed of the machine in neutral: 65 cycles/minute (corresponds to 130 masks/minute) | mask dimensions: L175xW95mm | power: 9kW, 220V | machine dimensions L6500xW4500xH1900mm | weight: 1800kg. Video on YouTube:

missing parts Auction-ID: A1-48980-177

Inv. Num. : 8440 Type:- Producer:- Generated: Parameters: Capacity: 400 1/min Components: Mixer Dump truck 3 bowls Press Gas oven Machine

Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table

Pasta machine WLS, Type Pressquick PQ 6-SU, Capacity approx. 50 kg/h, Capacity of the trough 12 kg, 2.2 kW press cylinder with continuous water cooling., DIOSNA S 120 2G dough kneading machine (has since been sold!), 100 drying baskets, JUWEL TS 120 drying cabinet, for pasta 200 - 400 kg in 12-36 hours, 8 drying programs, System was not in operation, Year of manufacture 2021

Used, concrete block, pavers production plant Brand: Quadra Model: Q6 PR6 Year: 2004 Second Layer Concrete unit Multiforks 12 levels, fork spacing 40 cm Drying cells galvanized metal shelving system 14 tunnels, 24 rows, total capacity for 3.744 filled production boards Production board size 1400 x 700 x 50 mm Number of production boards: 1.800 pieces Moulds: Curbs and paving stones (Rampf, Kobra and spanish local brands), about 40 varieties Color mix (4 colors) Pallet humidifier (spray) 2 shelves for the storage of the moulds Palletizing Spare parts for machine and palletizing

Multiweigh 20 heads weigher, - With horizontal vibratory feeders for fast products like frozen food or sweets/ nuts., - 20 heads, - Fully stainless steel rigidized material to prevent sticking., - With collection bucket for a faster more controllable workflow

Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil

A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and man ...

Manufacturer: Uniglass Model: UGTPLUS 1548-1-R Year of Manufacture: 2010 Voltage: 400 V AC Frequency: 50 Hz Control Voltage: 230 V AC / 24 V DC Power Ratings: - Heating Power: 690 kW - Motor Power: 870 kW - Total Power: 1570 kW Certification: CE Marked - the max. oven capacity is 4800x1500mm - the smallest dimension must have a diagonal of 290mm - The furnace can prestress thicknesses from 2.85 – 15mm - Regarding the condition of the system, it must unfortunately be mentioned that the ceramic rollers are in a bad condition Find more here - .ucymachines/ Contact us at - sales@ucymachines

A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1 ...

Height=1.3 m, Overall length= 0.9 m, Overall width= 3.35 m, Net weight= 415 kg,

Year: 2006 technically efficient, ready to work – after full service 3-spindle (high-speed motors) possibility of setting for various profiles (frame / sash) pneumatic profile clamping

Height=1.3 m, Overall length= 0.9 m, Overall width= 3.35 m, Net weight= 400 kg,

General Description Insulating glass production line manufactured by LiSEC Austria GmbH , comprising automated equipment for the production of double- and triple-glazed insulating glass units. The line includes a vertical glass washing and drying machine, polyurethane sealing system, metering unit and water treatment equipment for high-quality IGU manufacturing. Technical Details Manufacturer: LiSEC Austria GmbH Model: VHW-D20/V6 + DOS-1PUD Machine type: Insulating glass production line Year: 2017 Serial number (DOS-1PUD): 365-094505 Power supply: 400 V, 3/N/PE, 50 Hz Maximum operating pressure (DOS-1PUD): 6.0 bar Maximum glass height: 2,000 mm LiSEC VHW-D20/V6 vertical glass washer and dryer Polyurethane sealing robot LiSEC DOS-1PUD two-component PU mixing and metering system SAF-1000 filter unit GWT reverse-osmosis / water softening system LiSEC iPC-2008 industrial P ...

Bread loaf forming line composed of: -Weigher / divider / girder: For all types of dough (year 2007) Automatic lubrication system. Adjustable weight. from 60 to 600 grs. Speed variator. 40 kg hopper for dough, made of stainless steel and non-stick material. Flour sifter. Digital parts count. -400-basket resting chamber, manufactured in 2004. Adjustable time. -Bread loaf former, made in 2004 tape width: 600mm

Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

Manufacturer: Bottero Model: TRANSFER 500P Year of Manufacture: 2018 Voltage: 400 V Frequency: 50 Hz Rated Current (In): 3 A Mass: 1000 kg Minimum size : 140mm Max. size : 2000mm Thicknesses from 3mm – 19mm Titan 222L They have also ground 2mm glass several times. Find more here - .ucymachines/ Contact us at - sales@ucymachines

- Model: MAX 80 CNP - Manufacturer : Glaston - Year of manufacture : 2015 - Condition: Used Includes water reservoir tanks and cerium mixing tank with all equipment and several consumable spear parts. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Complete beer production and packaging plant available for sale following the closure of an industrial brewery. An excellent opportunity to acquire a comprehensive brewery installation covering the main stages of beer production, fermentation, storage, refrigeration and packaging. Main equipment included: Robix Hungary Kft. ROPPI-1100 - 2-roller malt mill Eco Brew Tech Tino Cottura + Tino Filtro - Automatic brewhouse - 2014 Thermindus GV Insieme - Electric steam generator - 2014 Eco Brew Tech Fermenter 2,731 L - Fermentation and maturation Unitanks - 2014 - 3 units Eco Brew Tech 2,200 L - Mixing tank with agitator - 2014 Céspedes / Idrotecnica S.r.l. - Automatic isobaric filling and capping monoblock - 2014 Céspedes S2/Z - Automatic labelling machine - 2014 Keyter KWF Series - Industrial glycol chiller - 2018 The installation also comprises additional stainless steel tan ...

URBAN AMS 6010 very good condition fully operational

Height=6 m, Overall length= 21 m, Overall width= 3 m, Fritsch Euroline transporter. Spreading transport table.

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Producer: Eberhardt condition: refurbished In stock Made in Germany Description In excellent working condition fully refurbished bun rounder Eberhardt Piccolo 4 can divide and process even the most sticky soft dough – Easy to clean removable top cover – Rust-resistant light metal cutting head – Dimensions 6359134 cm – Power 0,55 kW – Voltage 400 V amperage 1,7A – 30 divisions processing 40-135 g dough pieces – 3 moulding plates included

Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process

Complete professional oil mill & filling line incl. labelling technology, raw materials & bottle storage – turnkey For sale is a complete, professional production and bottling plant for cold-pressed edible and specialty oils. Ideal for farmers, direct marketers, founders or existing farms who want to set up or expand their own oil production. The package is perfectly matched to each other and enables immediate production to start from seed to the finished labeled end product. 1. Machinery & Production Technology - NF 500 oil press with infinitely variable speed control (year of manufacture 2020). Manufacturer: Nature Fuel Osnabrücker Ölmühle GmbH & Co. KG - Chamber filter press KKF200/10-2 (built in 2025, as good as new). Manufacturer: Oil press GmbH & Co. KG - Pneumatic oil filling machine (100 ml – 1000 ml) - Stainless steel container 590 liters with l ...

Year: 2000 - technically efficient, ready to work – after full service - 4 heads - support arms

Fully automatic assembly and packaging line for the production of Hydrobox assemblies. The special system consists of extensive conveyor technology with roller and belt conveyors, separation and buffer systems, automated packaging stations, test modules as well as safety and control technology. The system was specially developed for a continuous production process and is suitable for industrial assembly, packaging and material flow applications. Technical data Manufacturer of the entire system: Dreisbach & Jungmann GmbH & Co. KG Machine name: Hydrobox production line Plant type: Assembly and packaging line Year of construction: 2020 Machine number: 010820 Mains connection: 3/N/PE, 400 V AC, 50 Hz Connected load: 18 kW Connection current: 32 A Control voltage: 24V DC Compressed air connection: 6 bar Plant components Fully automatic roller conveyor t ...

Fully automatic assembly and packaging line for the production of Hydrobox assemblies. The special system consists of extensive conveyor technology with roller and belt conveyors, separation and buffer systems, automated packaging stations, test modules as well as safety and control technology. The system was specially developed for a continuous production process and is suitable for industrial assembly, packaging and material flow applications. Technical data Manufacturer of the entire system: Dreisbach & Jungmann GmbH & Co. KG Machine name: Hydrobox production line Plant type: Assembly and packaging line Year of construction: 2023 Machine number: 060722 Mains connection: 3/N/PE, 400 V AC, 50 Hz Connected load: 18 kW Connection current: 32 A Control voltage: 24V DC Compressed air connection: 6 bar Plant components Fully automatic roller conveyor t ...

Year: 2007 - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table

Auction-ID: A1-49926-20