painting used for sale

Description: Supply voltage: 230V Power Consumption: 400W Tank capacity: 800ml Maximum paint viscosity: 80 DIN-Sec Paint consumption: up to 300 ml/min Painting speed: 15 m2 in 10 minutes Nozzles included: 1.8mm, 2.5mm Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 2 kg

Description: Supply voltage: 230V Power Consumption: 400W Tank capacity: 800ml Maximum paint viscosity: 80 DIN-Sec Paint consumption: up to 300 ml/min Painting speed: 15 m2 in 10 minutes Nozzles included: 1.8mm, 2.5mm Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 2 kg

Description: - Edge profiling, sanding and painting system - Serial number 03083 - Total installed power 117 KW - Working width from 200 mm up to 2500 mm - Workpiece thickness from 6 mm up to 80 mm - Minimum workpiece length 90 mm - Adjustable feed speed from 5 m/min up to 44 m/min - Power of the feed motors: 7.50 KW and 0.75 KW - Power of the machine opening motor 1.50 KW - Machine equipped identically on both sides with 9 units on each side: - 1 - Milling unit: adjustable in depth, height and inclination, motor 7.50 KW-6000 rpm - 2 - Milling unit: adjustable in depth, height and inclination, motor 4 KW-3000 rpm - 3 - Fine milling unit: upper and lower motor with 1.80 KW-12000 rpm each, tiltable up to 45° - 4 - Belt sanding unit: motor 2.20 KW-940 rpm, swiveling, height and depth adjustable, with pneumatic sanding pad - 5 - Belt sanding unit for upper bevel: Motor 1.10 KW-930 rpm, swiv ...

Manufacturer: Grenier - Charvet Model: E 25 Type : High viscosity paste mixer   Motor power : 25 CV - 18 KW Speed variation : mechanical Previous use : Painting Agitation tool: approx. ? 800 mm butterfly / cloverleaf type Tank clamping: pneumatic Vertical movement: hydraulic unit

Manufacturer: Pendraulik Model: WRV49 Year : 1978 Type : stirrer / disolver Atex class : EExe G3 7 Motor : BBC Power : 3,6 KW Rotation: max 1500 rpm Wall bracket: manual Previous use: painting Stirring head diameter: 200 mm Agitation shaft length: 105 mm Up/down travel: 150 mm Speed variation: mechanical

Description: • Glass sandblaster • Serial number 980 • Total installed power 1.91 KW • Maximum glass height approx. 1300mm • It includes SABLEX GLASSNET vacuum cleaner, flow rate 600 m³/h • It includes SAGOLA 6110 CO painting tank, volume 10 liters Approx. Onsite Dimension. (l x w x h): 5,500 x 1,200 x 2,450 mm, weight approx.: 800 kg

Clamp length: - mm Clamp width: - mm 0: - Nm Glass bead nailer 2 P Jumbo automatic E.C. Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation, With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop devi ...

Description: GIARDINA DUALTECH 420 DB DRY Roller Application Machine with synthetic-coated, 2,000 mm wide conveyor belt and a working width of 1,300 mm Material recovery GREEN BELT Infeed roller conveyor with a working width of 1,300 mm, length 1,220 mm  ,  , , , Roller transport, driven rollers with suction device at the bottom.  , , , Workpiece blow-out, rotating blow-out, time-controlled  , , , Outfeed transport- hinged  , , , Lexan cover, hinged at the discharge, cover of the green belt zone  , , , Powered roller transport, PVC coated rollers. __________________________________________________________________ The linear slides are dust-sealed and are maintained via a few central lubrication points. Modern software controls the acceleration as well as the deceleration and is adjustable from 0-120 m/min.  ...

Description: Technical data  , , , Total length:2.000 mm  , , , total width: 1.000 mm  , , , working height: 750 mm  , , , Paper roll length: approx.600 mm  , , , Outside diameter: 100 - 300 mm  , , , Diameter bore: 76 mm  , , , total weight: 200 kg  , , , Compressed air connection,  , , , 3/8 quick connector:6 bar  , , , Standard: CE  , , , Colour water blue :RAL7021  , , , Colour signal grey :RAL7004  , , , ATEX, Zone: 0  ,Without paper roll and empty core ___________________________________________________________ This version of the painting table is not rotatable ____________________________________________________________ you can also watch the Youtube video about the speed https://youtu.be/OEaA6eswoaE  ...

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

drum diameter:400 mm revolutions per minute:980 U/min total power requirement:2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side ...

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

An important, at the same time vulnerable, spare part for a turning-boring machine 1580L (also compatible with 1563), namely a cross-beam (traverse) produced by KZTS (Kolomna, RF), not used, warehouse storage, 1992 onwards. surface corrosion is not significant, cleaning, grinding and painting should be carried out directly in the workshop before installation. Casting in excellent condition. The part is ready for any inspection. Photo and drawing with exact dimensions are included. Making another new cross member is costly and time consuming.

Spiral Mixer Diosna SP 160 AFT Condition: checked, cleaned, new friction wheel, new V-belts, defective parts replaced, new painting Operating hours: 13761 h Dough capacity: 160 kg Flour capacity: 100 kg Bowl capacity: 260 l Computer control Programmable recipes Two speed levels Hydraulic pliers lock Friction wheel drive

ROTARY DRUM VACUUM FILTER FILTRATION SERVICES 1525X1830 8.8 M2 USED REF#: C6834 Rotary drum vacuum filter manufactured by FILTRATION SERVICES. With power tank and electrical panels. General characteristics: Maker FILTRATION SERVICES Drum diameter 1525 mm Drum length 1830 mm Filtration area 8.8 m2 TRANSPORT DIMENSIONS (without peripherals or paintings) Overall length 3340 mm Overall height 2000 mm Overall width 2750 mm