painting used for sale

roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 1 year warranty Specification: Monobloc laboratory rolling mill 200 x 400 mm - new - roll diameter: 200 mm - roll length: 400 mm - roll bore: peripherally drilled - Single drives: variable friction ratio - Roller bearing: bearing with grease lubrication - Gap adjustment: hydraulic - new hydraulic unit for roll gap and emergency system - New rotary unions make Johnson-Fluiten - two adjustable guide plates to reduce the to reduce the working area - Stainless steel tank - New safety cage - 2x AC brake motors make Siemens: each 5,5 kW, 400 V, 50 Hz - Painting: with RAL colours according to customers request - New electrical ...

Indestructible Samiac 40Kg in very good condition for sale Year of manufacture: 2000 Gas: Propane gas Power: 3 phases 380V Capacity per batch: 40kg Including: - Raw coffee lift - Destoner - 2 chaff collectors Revised and put into conformity by the manufacturer in 2008 (Emergency stop added) Since then: - All bearings changed - Drum back plate refit - Cooling arm stops when someone get close to the cooling bin - Insulation of the combustion chamber replaced - Raw coffee lift motor replaced Between 20 and 30 tons roasted per year during the last 3 years (less before). Carefully maintained and greased by it's owner. Nothing to do except for a cleaning, drum motor oil change and maybe a bit of painting. It was in production until the end of June 2022 and is now dismantled Don't hesitate to ask us for more details or request more photos & videos. Ty ...

The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...

I sell a cargo loader suitable for industry, for example in wood industry, painting elements or material manipulation etc. Model: Makor ACR/2 Year of construction: 1990 Manipulazion in 90° from Quär- to parallel direction Element length from 1500mm Thrust with electric motor Speed adjustable with gearbox. Fully operational. Available the same. 2 pcs in stock.

For Sale Commercial Operation trade with cars, trucks, agriculture and building machines in Bosnia-Herzegovina -outside EU- - all other business possible - The company in Bosnia Herzegovina is an independent Doo, established in 1999. The main business is trade with all kind of new and second hand agricultural and building machines as wheelloaders and diggers , spare parts, cars and workshop for service. The statute of the Doo allows much more business and can be changed for all kind of other business. In that area all kind of business is possible and allowed, also production, distribution, and so on - as it is industrial area. Part of this DOO is a real estate with 3000 qm paved area, with strong fence all around. Building is new built in 2005 with German Standard - massive,fully damped against cool and warm, central heating. Ground floor there are 2 offices with tea-kitchen, W ...

Painting cell with ABB robot Year of construction: 2016 Robot ABB IRB 1600 Payload: 6 kg Arm area: 1200 mm Control: IRC5 Number of axles: 6 Axis range: J1 +180° – 180° J2 +136° – 63° J3 +55° – 235° J4 +200° – 200° J5 +115° – 115° J6 +400° – 400° Turntable Suction Automatic V5 HVLP paint sprayer DO Combo Diaphragm Pump

roll diameter: 550 mm roll length: 1500 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 90 kW Condition: used, overhauled Specification: rolling mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - monoblock - motor under the rolls - Fixed friction between the rolls - Rolls: peripherally drilled, for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable steel material guide jaws - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - Safety brake for EMERGENCY STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety bars bi-directional - New electrical control cabinet with PLC system S7-1200 - New frequency converter for 110 kW, f ...

roll diameter: 500 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 110 kW Condition: used, overhauled Specification: rolling mill 500 x 1500 mm - used - roll diameter: 500 mm - roll length: 1500 mm - monoblock - motor under the rolls - fixed friction between the rolls - Rolls: with core bore, with central chamber for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable material guide jaws made of steel - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - New safety brake for NOT STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety rods bi-directional - New electrical control cabinet with PLC system S7-1200 - New fr ...

bore capacity in steel (diameter): 55,0 mm throat: 300 mm bore stroke: 140 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 70 - 1.200 U/min engine output: 1,8 / 2,9 kW column diameter: 145 mm thread: M30 ST60 thread: M36 GG20 feed: 0,10 + 0,30 mm/U weight: 380 kg Machine height: 1850 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spi ...

bore capacity in steel (diameter): 14 mm throat: 200 mm bore stroke: 60 mm morse taper: 1 MK table:: 280 x 260 mm turning speeds: 430 - 4500 U/min column diameter: 70 mm weight: 100 kg NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spin ...

: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm weight: 605 kg Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely v ...

bore capacity in steel (diameter): 50 mm arm length: 1600 mm workpiece height max.: - mm threading:: 40 mm column diameter: 350 mm bore head horizontal movement: 1250 mm drilling head vertical adjustable: 580 mm spindle stroke: 315 mm transmission ratio: 16 Distance Pinole - Ground Plate: 1250 mm turning speed range: 25-2000 U/min feed range: 0,04 - 3,2 mm/U tool taper: MK 5 total power requirement: 4 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2500 x 1060 x 2840 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling hea ...

Proficoater Hymmen PFC-S 1400 Painting system for the application of UV-curing lacquer systems with integrated roller troweling machine Conforms to EC Machinery Directive Coating: from above Operating side: left, Working height: 900 +/- 50 mm, Nominal width Application roll: 1,400 mm, Effective usable width: 1,300 mm, Delivery height: max. 100 mm, Feed rate: 6 - 30 m / min, drive control, Mains voltage: 400 V, 50 Hz, Protection class: IP 54, Power consumption: approx. 16 kW, Fuse: 63 A on site, Total length: approx. 5.660 mm, Total width: approx. 2,700 mm, Part speed: approx. 12 m / min in reversing mode, Approx. 8 m / min in the flow, Plates: wood panels, Plate length: min. 300 mm, Plate weight: max. 80 kg / m², Varnish: UV paints solvent-free 60 140 DIN4sec, 3 - 40 g / m² depending on the lacquer system and selected program, EX range: The application machine ELX-S is designed for ...

Our company provide a Lefort C850T machine with complet refurbishment. The machine is a full extra machine has the following extras: -Full Tunner pusher -Window crosshead -Soft started -Oil Heater -Pre-feeder -Central Greasing system For our refurbishment we provide warranty, and man power for the assembling and commisioning. The Estimated delivery time will be end of May. In case of need, we can provide platform and cabin for the customer. Technical details: Cutting force:850T Hold down force:200T Pusher force: 120T Open Box Section: 8000x2400x1000 mm Closed Box Section:8000x1000x700 mm Lid cylinders: 4x175T Power Source: 2X182Kw Electric engine Own Weight:150T And what we done on the machine? Just a few examples: -Complet refurbishment of the shear head -At the box we changed: -- Wear plates in 4 sides -- Hinges -- 4 New lid cylinder completly -Complet Refurbishment of all pumps -Recon ...

Refurbished Plate format: 470 x 470 mm Dimensions: approx. 2700 x 1100 x 1800 mm Chamber depth: 25 mm Content:190 litres Operating pressure: 10 / 12 bar Cloud entrance: flange 11/2", central Number of plates: 44 plates Material sheets:Polypropylene Material cloths: PP 5322 (black) with felt edge Design: open filtration Closing pressure: max. 310 bar via double-acting cylinder Painting: primed and lacquered in RAL 5010, filtrate channel + drip tray in plastic, 950 mm for container height on operator side Engine hydraulics Warranty - 12 months, excluding wear parts

0: , St. Width: 1000 mm Length: 1720 mm Commission car RU-KWI-S --------------------------------------- The RU-KWI-S is for internal and truck transport. In When unloaded, it can be nested. For forklift and Suitable for crane transport. --------------------------------------- Equipment and accessories: -With a removable crossbeam so that the consignment trolleys are unloaded State can be pushed into each other. -With 4 crane hooks, 4 forklift brackets and 4 lashing strap holders. -Mobile on 4 polyamide swivel castors Ø 150 mm, 2 of which have brakes. -Steering rollers can be removed, so the commission trolley can stand securely on the truck. -Other equipment and accessories as for RU-KWI. --------------------------------------- Technical details RU-KWI-1600S: - Length 1,720mm - Width 1,000mm - Height 1,950mm - System height 1,500 mm - Usable width 700 mm - Weight 85kg The painting is do ...

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

Clamp length: - mm Clamp width: - mm : - Nm Glazing bead nailing device 2 P Jumbo automatic E.C. - new - Your advantages: - The corner joints are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames can be easily assigned Staple Corner Joining Machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. choice between automatic and manual operation, With angle system, clamping device from above and from the front Pressure separately adjustable. Insertion of parallel and superimposed Clamping possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----------------------------------------------------- Price in this version on request! Plus the current material cost requirement from 300.82 euros Plus packaging/shipping Surcharges: --------------------- Mobile work t ...

Machine Pastry forming/speculoos machine Cleaned & functionally tested Properties: + different roller shapes possible + easy and simple operation + manual, analogue control + Machine equipped with new suction belt and new bearings STANDARD equipment: + incl. 1 reel (3 different motifs to choose from) SPECIAL EQUIPMENT: - 4 more reels available (3 different motifs) - Surcharge for each additional roller: 350,-- € net - Flat rate for all 5 reels: €1,200,-- net - Surcharge for new painting of the machine: 850,-- € net Specifications: - Year of construction: 1979 - Dimensions: 48 x 137 x 133 cm (W x D x H) - roller width: approx. 23.5 cm - Roll diameter: approx. 12.5 cm - Figure height: approx. 4.5 cm to 8 cm - Figure width: approx. 3.5 cm to 4 cm - Figure thickness (/ thickness): approx. 3 mm to 5 mm - Net weight: approx. 150 kg - Power: 380 V - 3Ph - 5 ...

5214 – AGJ LRFB-2600-850 Blasting machine, painting equipment Manufacturer: AGJ Model No.: LRFB-2600-850 Dimensions of the materials to be processed: Plate: Length: Maximum: 12000 mm Min.: 2000 mm Aisle length: 6000 mm Width: Maximum: 2600 mm Min.: 1000 mm Aisle width: 2000 mm Thickness Maximum: 120 mm min: 3 mm Travel: 8–20 mm Enclosure size: 54.5 x 18.5 m Built-in electrical power: 290 kW Power consumption: 470 A Voltage: 3x400 V

cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...

Contimeta SIAT SM116 - K11/70 Automatic carton sealer with automatic folding system and manual format adjustment Automatic machine for standard closing The carton sealer automatically folds the upper lid flaps by means of guide rails and a closing arm 2 motorized lateral conveyors with a width of 50 mm Transport speed 20 meters per minute Voltage 400V signal system for tape end or breakage special painting: frame color RAL 5003, covering safety cage RAL2001 Energy saving system Special design: 3 colored indicator lamp: green/orange/red for machine condition ok / tape almost empty / tape broken. Including potential free relay contacts for these signals Carton is only glued on top, not on bottom Carton dimensions L x W x H (mm): Min. 300 x 150 x 180, Max. 900 x 650 x 700 The SM11-6 processes between 600 and 1000 cartons per hour The guide rails are manually adjustable The height of the sea ...

1. CONTAINER TYPE LIQUID SPRAY BOOTH Spray booth type : Side draft, enclosed type Air speed : 0,50 m/sec (empty spray booth) EXTERNAL DIMENSIONS Length (mm) : 6.058 Width (mm) : 2.438 Height (mm) : 2.591 INTERNAL DIMENSIONS Length (mm) : 5.900 Width (mm) : 2.350 Height (mm) : 2.390 SPRAY BOOTH BODY Entry doors : 2-leaf hinged door 1x leaf G3 filter for air inlet 1x leaf service and emergency door with a panic bar Body material : Mild steel and rectangular iron tube metar structure Insulation : 50mm PIR polyurethane filled sandwich panels, B1 class flammability Window : 2 set of 600 x 600mm waterproof PVC window Container base : Aluminum sheet, non-slip Lighting system : 2 pcs, 2x36W enclosed type armatures, Ex-proof Zone 2 Lifting : Lifting eyes at the top corner areas, forklift fork openings at the base HEATING SYSTEM Source : Electricity He ...

VM PLC CONTROLLED POWDER COATING RECIPROCATOR The powder coating reciprocator is designed for automated painting applications. It ensures perfect coating of the work pieces passing in front of it by moving the spray guns up and down in a single axis. It moves in one axis along the vertical guide column, providing maximum performance under daily working conditions withstanding continuous load. The brake drive motor and gearbox have been selected to ensure the reciprocator’s long life and performance under heavy working environment conditions. The mechanical system design with chain or belt provides silent and vibration-free vertical movement. Perfect coating is achieved with easy adjustment of stroke and speed. RECIPROCATOR CONTROL UNIT • Remote control panel 7" 65K color hand touch LCD screen, • Two reciprocators can be controlled independently from the same display, � ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Centrifugal fan, dust extractor fan, fan, extraction fan, dust fan, painting extractor fan -for paint wall, paint booth -Motor Ex protected -Motor power: 2.5 kW -Speed: 1450 rpm -Volume flow: 5000 m³/h -Pressure: 800 Pa -Connection input: Ø 500 mm -Connection output: Ø 450 mm -Dimensions: 1065/850/H1390 mm -Weight: 186 kg

Airless sprayer, painting device, spray pack, electrostatic sprayer, airless complete system -Manufacturer: Wagner, airless sprayer unit type: 33-70 -Material flow: max. 12.6 l/min 1.6 gal/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Spray gun: missing, individual components see photos -Dimensions: 900/300/H470 mm -Weight: 28 kg

Exterior mirrors, exterior mirrors, mirror housing mirror bracket -Manufacturer: Scania, mirror housing, mirror bracket repaired / prepared for painting -Type: 590657 -Dimension: 1640/640/H210 mm -Weight: 8 kg

bore capacity in steel (diameter): 23,0 mm throat: 250 mm bore stroke: 100 mm morse taper: 2 MK table:: 370 x 300 mm turning speeds: 225 - 4.300 U/min engine output: 0,6/0,95 kW column diameter: 90 mm weight: 175 kg Machine height: 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machining capacity - Maximum workpiece diameter: 6300 mm; - Maximum height of workpiece to be machined: 4600 mm; - Maximum weight of workpiece: 150000 kg; Faceplate - Faceplate diameter: 6000 mm; - Turning speed range: 30 rpm; - Main motor power: 125 kW; - C axis: 0-360°/min.; Cross rail - Cross rail vertical travel: 3500 mm; - Feed of cross rail: 1000 mm/min.; - Motor power: 18.5 kW; Turning and Milling RAM, 1 piece - Vertical RAM travel, Z1 axis: 2400 mm; - Horizontal RAM travel, X1 axis: 7200 mm; - RAM octagonal section: 310x310 mm; - Maximum milling speed: 3000 rpm; - Maximum milling power: 30 kW; - Maximum torque: 800 Nm; - Milling spindle taper: ISO-50 (DIN69871/DIN69872); - X1/ Z1axes rapid feed: 6000 mm/min; Turning RAM, 1 piece - Vertical RAM travel, Z2 axis: 2400 mm; - Horizontal RAM travel, X2 axis: 7200 mm; - RAM octagonal section: 310x310  ...

Injection molding machine by Battenfeld Wittmann. The injection molding machine is from 2018 and has been with us since the news, serviced only in Battenfeld Polska, full history, documentation. The injection molding machine has only 6600 hours of working life. Injection molding machine like new. Upper injection unit - not used, turntable - not used. screw diameter mm 30 specific injection pressure bar 2042 calculated injection volume ccm 106 screw L / D ratio 22 plasticization efficiency g / s PS 12 air injection speed - standard ccm / s 85.7 Cylinder heating system power kW 10.4 SmartPower Rotary Table Table diameter mm 750 Table height mm 140 Table weight kg 1,200 Time of table rotation by 180 ° sec 1.2 Max weight of the mold kg 600 Number of connections 4 x G3 / 8 Max weight of the mold on the turntable kg 1,000 power of the drive system kW 37 oil tank cap ...

Scattolini Flatbed for Light Commercial Vehicles Innovative flatbeds for light commercial vehicles Scattolini bodies are manufactured in modular construction. As a result, any repairs can be carried out quickly and without welding. The modules can be easily replaced with standard tools. All Scattolini bodies are equipped with aluminium side walls as standard. Product Standards • Plywood frame with non-slip resin protection of the surface • External lashing strips for tarpaulin fastening. • Completely retractable side and rear side wall locks that can be opened without any side protrusion • Anodized aluminum alloy side panels, 400 mm high, with profile in a new and exclusive design, hinge recessed into the side wall • Adjustable exclusive locks with anti-vibration device and automatic backlash compensation • The side wall locks are locked under tension to create  ...

Used ribbon mixer with a capacity of 230 L. Unit made of acid resistant steel. Chain drive 2-row, 400V power supply. Mixer after professional reconditioning (glassing, transmission and motor service, replacement of wiring and plugs, painting with reactive primer). Ready for operation.

Control for UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp, UV painting system -Manufacturer: IST Metz, control for UV dryer lamp -Type: M-20-1-S-SS -UV tubes: type M 200 S 2 -UV range: 180-450mm -Quantity: 4x controls available -Price per piece -Dimensions: 600/360/H600 mm -Weight: 77kg/piece

Caljan telescopic roller conveyor 600-5/6.5 RA2166 Base part with 2 manualy retractable telescopic elements. The telescope can be moved in or out with a crank handle on the take-off side. Attention: ONLY for trucks loading Type: 600-5/6.5 Year of manufacture: 1998 Condition: functionally tested faultless optical: minimal traces of use fixed part with double supports: 400 mm hight Telescope elements 2 pieces: manualy retractable and extendable Telescope extension/retraction: crank handle on operator take-off side Accumulating effect: accumulating with slope Technical data: Staionary part Length: 5000, +6500 mm extention Part Roll width: 600 mm Outside width: 930 mm Height 1 transfer: 400 mm - Feeding e.g. via belt conveyor on customer side Rollers galvanized and plastic: d = 50 mm Roller pitch super narrow: RTLG = 65 mm Protective cover: bottom complete Operation/crank handle: front side  ...

SPIRO CSTW 2D HG 1500 seam welding machine built in Switzerland in 2008, is designed for welding workpieces made of, among others, stainless steel or galvanised steel that are overlapped. The completed seam requires no additional sealing, cleaning or painting, and the channels are perfectly tight along the entire length of the workpiece. The versatile CTSW-2D HG welding machine uses welding rolers to precisely and accurately join materials, making it ideal for a variety of industrial production applications. Technical data of the SPIRO CSTW 2D HG 1500 welding machine - machinable materials: stainless steel, galvanised steel, black steel, tubes - welding length (seam): 60-1524 mm - maximum workpiece diameter: 1000 mm - minimum workpiece diameter: 10 mm - maximum workpiece thickness: 1.25 mm - minimum workpiece thickness: 0.3 mm - maximum welding speed: 12 m/min - seam overlap:  ...

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm Control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

New Palletizer ROBOT ARM PALLETIZER Automatic palletizing group specially designed for high speed applications with Fast Pack Formation Table at High Elevation Speed suitable for 72 000 cans hour line for 250 ml slim cans with 6 4 configuration on 1200 1000 mm pallets Package infeed height H 2000 mm Designed for pallet dimensions 1000x1200mm Max standard pallet height 1900mm Pallet transfer height H 500mm Machine is composed of Fast Pack Formation Table at High Elevation Mechanism to turn packs automatically at inlet of the palletizer according to the predetermined configuration of each layer It is controlled by the PLC and The device is equipped with a turner which turns the product of 90 if required Intermediate Table Consists of conveyor table a product pushing device to pallet lifter Driven by a geared motor The translation of the layer from the performer to the palletiser is carried ...

Used Palletizer and Stretch Wrapper KETTNER UM1200 14000 BPH In excellent condition the machines are still indoors so it s ready for sale immediately As requested by your total overhaul of the used equipment is at your disposal the work phases so with the bottling machines washing operation used palletizer pre assembly mechanical operation indeed with check repair with replacement of delicate parts such as bearings etc This used palletizer painting with sandblasting of interesting parts so it is keeping the same RAL Replacement of all PAL Control and compliance of the complete machine side system Electrical panel with PLC replacement indeed it uses SIEMENS OR SIMILAR Control and standardization of electrical panel with verification and replacement of Demange parts Complete system disassembly and assistance for packing and loading for transport Bottling machines delivered FOB Italy seapor ...

Complete painting system Nestro/Berkmann type 3101/2101. It is a fully equipped paint room with Underfloor extraction, supply air device, EX lights, paint pump, tray trolley, etc. EX protection doors optionally available. Including dismantling and loading. Special price from location until March 22, 2024, Technical specifications: On demand

roll diameter: 350 mm roll length: 700 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 22 kW Condition: used, overhauled Specification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers - roller diameter: 350 mm - roller length: 700 mm - Rollers: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tilting guide plates made of steel - New roller container, made of stainless steel, for holding mixture - bi-directional bars - Safety brake for NOT stop - AC motor: 22 KW - 400 Volt - 50 Hz - New frequency converter system for variabl ...

Automatic band sawing machine with bow movement, vices and hydraulically controlled advancement. Blade descent and ascent controlled by feeler. Cutting progress with infinitesimal adjustment. Manual setting of the cutting length via handwheel, quantity of pieces to be cut and machine functions managed by PLC. Mechanical blade tensioning controlled by limit switches. The machine is complete with protective casing, double safety button for starting the cycle and low voltage electrical system according to CE regulations. Cutting capacity Round + 90° 280 mm + 60° 140 mm + 45° 225 mm Painting + 90° 240 mm + 60° 140 mm + 45° 215 mm Dish + 90° 330 x 240 mm + 60° 140 x 130 mm + 45° 230 x 140 mm Cutting speed 35 – 70 m/min Work surface height 835 mm Blade motor 0.9 – 1.5 kW (V400) Hydraulic control unit motor 0.37 kW Coolant pump motor 0.12 kW Ca ...

I offer a carding machine along with the weight of the Befama brand after a general overhaul. The machines have been completely renovated, including painting. Equipped with sawing material with a working area of 2000 cm. I also offer a number of other machines for the textile industry - including a complete line for the production of drag.

Combined profiled steel shears and hole punch GEKA type HYD 80 / Hydracrop 80/A Masch. No. 9566 Year of manufacture approx. 2000 Punching force 80 ton. Projection 300 mm Punching up to 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm 4-point shears 45 x 45 mm Round material shears 45 mm Rectangular notchers up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz stop with el. Lifting release 500 mm - Work table with stop for the hole device 550 x 380 mm - Working height of the hole device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height rectangular notcher 930 mm - Approx. 21 pieces of various punching tools - Operating instructions - Original painting, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 ton. very good condition; used

grinding diameter: 500 mm grinding length: 1000 mm centre height: 250 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5 Micro-adjustment for the standard workhead Dressing device ...

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

grinding diameter: 850 mm grinding length: 4.000 mm centre height: 525 mm workpiece weight max. betw. centres with steady: 5.000 kg control: SINUMERIK 840 D Feeds & travels: - feed Z-axis: 0,01 – 6.000 mm/min feed X-axis: 0,01 – 6.000 mm/min Travel Z-axis (table): 4.500 mm Travel X-axis (grinding spindle): 650 mm Grinding wheel: - Max. Dimension: Ø1.060x60x304,8 mm grinding wheel speeds: 1.100 min-1 peripheral speed: 45 m/sec power: 22 kW tail stock: - Taper: MK 6 quill travel: 100 mm diameter of quill: 115 mm Workpiece spindle: - Taper: MK 6 Speed range workpiece: 10 - 120 min-1 torque of the drives: 41,5 NM control: total power requirement: 52 kW weight of the machine ca.: 25,5 t Equipment & Accessories CNC cylindrical grinding machine in most robust design for heavy workpieces • Scope of geometric retrofit: • Slideways of X- and Z-axis regrinded, intermediate table and top ...

Description: Supply voltage: 230V Power Consumption: 400W Tank capacity: 800ml Maximum paint viscosity: 80 DIN-Sec Paint consumption: up to 300 ml/min Painting speed: 15 m2 in 10 minutes Nozzles included: 1.8mm, 2.5mm Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 2 kg