paint used for sale

Semi-automatic flocking system Flockkabine MAAG flocking technology The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the parts were coated for the automotive industry.

Fuel oil tank diesel tank steel tank tank system with 20,000 litres capacity, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and cleaned professionally and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is re-primed and painted on the outside. L = approx. 6.90 m / D = 2.00 m / weight approx. 4.2 to. / ex works, freely charged. General: The price for the gas station is valid from the Söhrewald plant near Kassel, ...

Semi-automatic flocking system Flockkabine Manufacturer: The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. Plant size: Width: approx. 6.5 m Depth: approx. 2.8 m Height: 3, 3 m Lock doors Width: approx. 900 mm Height: approx. 600 mm

"Power: 6,000 - 8,000 packets/hr current package format (LxWxH): 80 x 80 x 80 mm Weight 500 g Foil: aluminum, parchment Date print: Embossing Connection values: 380 V; 7.86 A; 3 KW Air requirement: 500 L/hr Dimensions (LxWxH): 1.8 m x 1.4 m x 2 m Other: - case painted white - Product direct inlet Schuy + Folmeg Maschinenbau GmbH is happy to overhaul this system for you. All electrical and pneumatic components are brought up to date and mechanical components are overhauled and 80% of new quality is available. You will also receive a 1-year warranty for the system. Speak"

"Power: 5,000 - 8,000 packets/hr current package format: 100 Height: 70 mm maximum package size: 100 mm Height: 90 mm Date Print: Stamp Dimensions (LxWxH): 2 m x 1.3 m x 1.8 m Connection values: 380 V; 11.84 A; 4.5 KW Other: - Drain belt set up for product direct inlet - Intermediate leaf support provided - Case painted white Schuy + Folmeg Maschinenbau GmbH is happy to overhaul this system for you. All electrical and pneumatic components are brought up to date and mechanical components are overhauled and 80% of new quality is available. You will also receive a 1-year warranty for the system. Speak"

9-colour combination offset/label press 5 x offset cassettes in 25 x , 23 , 22.25 , 2 x Offset Cassettes 24 x . 2 x Flexo 2 x screen printing 1 x cold foil embossing Sensotec autom. Register control,only for longitudinal register control Amal Non - Stop reel changer, unwinding and winding Corona Pre-treatment - Vetaphone Track edge control BST Wandres railway cleaning Lamination Painting Low Migration Punch Gapmaster Kocher Beck back pressure Baldwin Cooling 9x UV Dryer GEW Cooling plates Turning cross to plant 3

8-colour combination offset/label press 5 x offset cassettes in 25 x , 23 x 2 x Offset Cassettes 22.25 . . . . 2 x Flexo 2 x screen printing Sensotec autom. Register control,only for longitudinal register control, cross registers manually Amal Non - Stop reel changer, unwinding and winding Corona Pre-treatment - Vetaphone Track edge control BST Wandres railway cleaning Lamination Painting Low Migration Punch Gapmaster Kocher Beck back pressure Baldwin Cooling 8 x UV dryer GEW Cooling plates

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

gebr. Roll press Fortuna fully automatic size 3, overhauled, for angular rolls, with 3 work plates, newly painted, 30-piece, weight of the dough pieces: 32 – 70 g, dough insert approx. 960 – 2100 g, 147 cm high, 69 cm wide, 80 cm deep, weight: 540 kg

- Machine mobile - Painting Kallfass green The condition of the machine is very good Price is net, ex works. The machine can be visited at any time.

Tablet counter,King type TB2,painted edition,max tablet size Ø 11,5 mm.,220 V.

Tablet counter,King type TB 2,painted cabinet

Capsule elevator,standing in painted rack,outlet height 2000 mm

High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph 230V Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 68  ...

Band conveyor,standing on painted leg frame,W 300 x L 1050 mm

Band conveyor,stainding on painted legs,W 105 x L 2000 mm.

Conveyor,stainless steel,standing on painted legfoundation,B 500 x 3300 mm

Plate heat exchanger,stainless acid proof steel,APV H17,painted,edge-clamped,14 plates.

Plate heat exchanger,stainless steel,APV H17,painted edge-clamped wall fitting

Formwork inclined columns newly hot-dip galvanized 2,10-3,50m a 40,90EUR/ pcs. New galvanized or painted construction supports 3.00m, 3.50m, 4.00m at great conditions directly from the factory. From 21,50€/ piece.+ VAT Construction support painted 1,60m - 2,90m = 21,50€/ piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, ...

Plate heat exchnager,stainless steel,Alfa Laval P01,painted,edge-clamped. 7 plates

Plate heat exchanger,stainless steel,Alfa Laval P01,painted edge-clamped. 9 plates.

DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...

DYNAJET 500th HELI Blue Performance INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. Construction: • 1-axle chassis for easy manoeuvring • Self-supporting and indestructible framework for weight optimization • Central crane eyelet for optimal transport in hard-to-reach places • Frame in dip painting technology for high corrosion protection and hi ...

DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology  ...

Many thanks for your interest on our second hand machines, please find follow our offer: Like New Condition - fully rebuild in 2016 after never used manufacturer: Probat Type: GP 25 batch roaster output capacity: ca 25 kg/charge different: batch size approx. 25 kg Raw Coffee complete new electric (all control, drives and wires) Cube top of Roaster was redesigned. All electrical parts are NEW. Likewise, all gas components - safety valve, automatic ignition etc .. Sanding, new painting and chromming. New bearings screws etc.. Digital temperature meters and refurbished gas burners and all gas nozels, New motor. Power supply- 3x400Vac. Full Documentation exist for all - electricity and Gas safety. The machine was baught from the last owner in fully rebuild condition 2016 but never used. Is stored in the origin packaging from 2016! We offer this machine in 'as is' condit ...

bore capacity in steel (diameter): 63 mm arm length: 2000 mm workpiece height max.: mm threading:: 48 mm column diameter: 450 mm bore head horizontal movement: 1550 mm drilling head vertical adjustable: 800 mm spindle stroke: 400 mm transmission ratio: 16 Distance Pinole - Ground Plate: 1600 mm turning speed range: 25-1600 U/min feed range: 0,04 - 3,2 mm/U tool taper: MK 5 total power requirement: 5,5 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3080 x 1250 x 3290 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling head  ...

bore capacity in steel (diameter): 100 mm arm length: 3150 mm workpiece height max.: mm threading:: 63 mm column diameter: 700 mm bore head horizontal movement: 2580 mm drilling head vertical adjustable: 1250 mm spindle stroke: 500 mm transmission ratio: 16 Distance Pinole - Ground Plate: 2500 mm turning speed range: 8-1000 U/min feed range: 0,06 - 3,2 mm/U tool taper: MK 6 total power requirement: 13 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 4780 x 1630 x 4600 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling head ...

max. wheel diameter: 650 mm gear width: 200 mm max. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mm table bore diameter: 150 mm number of strokes - stepless: 35,5 - 560 c/min max. ram stroke: 230 mm feeds: 3,55 - 40 mm/min radial feed: 0,8 - 9 mm/min work-spindle diameter: 110 mm total power requirement: 28,2 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,8 x 2,3 x 2,5 m Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Format range: 1350 mm, min 45 mm Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point bonding, electronic upper glue unit HHS Xpect YOC 2017, 8 channel with 4 application heads, disc glue on the left, new electronic servo overtaking system with touchscreen, Feeder with clock control and vibrator, feeder belt with Quick adjustment, pre-breaker right and left, kicker, counter, digital position indicators, additional means transport in the Pre-crusher top/bottom, folding floor module 150 with additional Medium transport top/bottom, additional means transport in folding, Jagenberg DBS01 control, motorized threading station, Video surveillance in the transfer station, fully automatic Format setting Jagset 2, cutting alignment on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transpor ...

bore capacity in steel (diameter): 125 mm arm length: 4000 mm workpiece height max.: mm threading:: 80 mm column diameter: 800 mm bore head horizontal movement: 3400 mm drilling head vertical adjustable: 1190 mm spindle stroke: 560 mm transmission ratio: 16 Distance Pinole - Ground Plate: 2500 mm turning speed range: 6,3-800 U/min feed range: 0,06 - 3,2 mm/U tool taper: metr. 80 total power requirement: 18 kW weight of the machine ca.: 28,5 t dimensions of the machine ca.: 5910 x 2000 x 5120 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilli ...

Clamp length: , mm Clamp width: , mm : , Nm RU-LH Painting Assistance Painting assistance for the simultaneous painting of sash and glazing ledges. A clamp has to be positioned in each corner of the already made frame. The operation is started by using a foot valve. For different thickness of ledges the clamping device is height- and depth adjustable. The positioning is diagonally and the clamps stick out of the wood about 25 mm. Now the frame can be pressed into the sash and is fixed. For the painting the frame is positioned now about 10 mm outside in front of the sash. After drying, the frame is pressed into the sash, it will be removed before the glazing. The clamps can be removed by hand for the further processing. For different thickness of ledges the clamping-device is height- and depth adjustable. The height is adjustable from 700 – 1200 mm. Advantages: Quick assembly No jammin ...

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic wit ...

Hartmann Packaging Machine 1. Packaging machine GBK 420 R - No. 431.GBK Capacity: up to 3200 packs per hour - GBK-420, year of construction 2000, V2A fairing - Machine structure in right version - Machine frame painted - Control cabinet or control box made of stainless steel. - Protective covers made of polycarbonate - 2 feeding paddles for vertical slices, for bread halves - Turning device for bread halves - Product feed through slider, stainless steel side rails - with horizontal plastic plates - Filter for cleaning compressed air in contact with food - Built-in self-cleaning vacuum filter (jet filter) - Air intake from the product slider - Device for automatic bag feeding - Automatic conveyor belt for bag feeding - Automatic shutdown if there are no bags - Clipper - Double clip roller holder - Thermal printer on clamping tape, 6 digits - Rotatable control panel ...

weight max. in kg: 1000 kg arm length: 4000 mm height: 3000 Unterkante Ausleger total column height: 3790 mm swivelling range: 270 Grad weight: 560 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - C ...

carrying capacity: 500 kg. number of suction cups: 6 Stück suction cup dia.: 215 mm 0: 8,0 m³/h tool adaptor: Kranöse 80,0 mm voltage: 400 V total power requirement: 0,18 kW weight of the machine ca.: 120 kg. dimensions of the machine ca.: 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust support structure made of steel - Painted in RAL 2000 with a low weight - Galvanized longitudinal traverse with a length of 2,400 mm - 3x galvanized crossbars with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³ / h and an ultimate vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from t ...

Format range: 1450 mm, min. 290 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point bonding, electronic Upper glue unit HHS 16 channel with 2x 4 and 2x 2 application heads, High-pressure pump, vibrator & dental gauge on the feeder, Pre-crusher left, kicker, counter, 2x pneumatically ascendable Accessory holders, additional folding floor module with press, additional means transport in folding, pressing rollers after folding, fully automatic format adjustment, 2x alignment to the press belt, UV marking device, video surveillance on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts. Other: Machine can be visited by arrangement while running.

weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 25 ...

weight max. in kg: 500 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4215 mm swivelling range: 270 Grad Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M ...

Bos Machine (BMH) with a Sapiens Wood We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: The machine is  ...

roll diameter: 150 mm roll length: 300 mm rolls drilled: Flaschenhals Nip adjustment: hydraulisch total power requirement: 4 kW condition: used, overhauled Specification: Laboratory Rolling Mill 150 x 300 mm - second-hand Motor under the rollers - Roller diameter approx.: 150 mm - roller length: 300 mm - Friction between the rollers - Rolls drilled with central chamber for water cooling - Rolls with new slewing rings, manufacturer MAIER, for water cooling, - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - Gap adjustment: NEW, hydraulic and as emergency system - Hydraulic unit NEW - NUE Tilting guide plates - NEW safety cage - Safety brake for emergency stop - AC brake motor: 4 kW - 400 Volt - 50 Hz - new mixing tanks made of stainless steel for the mixture - Safety devices according to current EN 1417:3/2015 - Painting: in RAL colours accordin ...

roll diameter: 550 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: Hydraulisch total power requirement: 150 kW Condition used, refurbished, Specification Roll mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - Variable friction ratio between rolls - cored rolls with central chamber for water cooling - nip adjustment: NEW hydraulical - hydraulic unit: NEW - tipper guiding plates - cylinders: mounted on bronze bushings with forced oil lubrication by pump, new rotary joints for connections to water circuit - N.2 safety brake for emergency stop - N.2 AC engine 75 kW – 380 V – 50 Hz - mill tray to contain compound - bi-directional bars for safety system - visualization display to monitor gap between rolls and engine speed - electric cabinet: with PLC system NEW - N.2 i ...

roll diameter: 350 mm roll length: 700 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 2x 15 kW Condition: new, with CE mark, Specification: Two Roll Mill 350 x 700 mm - new - cylinder diameter: 350 mm - cylinder length: 700 mm - cylinder boring: peripherally drilled - cylinder bearings: with grease lubrication - 2 cylindera chromed - nip admustment: hydraulically - new hydraulic unit - tipper guiding plates of nylon-polyethylen-material - stainless steel tray - bi-directional bars - AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz - bevel gearboxes of transmission: 2 pcs - painting: with RAL colours acc. to customer’s specification - complete machine protection with stainless steel carters - new electric cabinet - new electrical system - new machine on-board system - new control panel Touchpanel 7 - PLC system: 1 piece, brand Siem ...

roll diameter: 600 mm roll length: 1800 mm rolls drilled: Flaschenhals Nip adjustment: hydraulisch 0 total power requirement: 132 kW Condition: used, completely overhauled, with warranty Specification: Rolling mill 600 x 1800 mm - second-hand Monoblock model - motor under the rollers - Roll diameter: 600 mm - Roll length: 1800 mm - Roll core with central chamber for water cooling - Friction between the rollers - hydraulic gap adjustment: new - Hydraulic unit: new - Tilting guide plates made of steel - Rollers on bronze bearing bushes with recirculating oil lubrication via pump - Rollers with new ball slewing rings, make Maier, for connection to the water circuit - AC main motor: 132 kW - 400 V - 50 Hz - Safety brake for EMERGENCY STOP - Stainless steel roller container to hold the mixture - bi-directional safety bars - Visual indication of the gap between rolls  ...

Sat B2599A drawer oven 130 °C If very different products or product lines with equally different tempering times are to be treated independently of each other in the smallest space, drawer ovens are the smartest ergonomic solution. Data of the furnace Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the furnace Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in every drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in usable volume, at stabilized state: +/-3°C at 80°C Frame: The basic structure consists of an unalloyed steel girder structure, on which the exterior lighting made of unalloyed steel painted in RAL 1013 (pearl white), applied. The furnace inner housing is made of aluminized sheet steel  ...

roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls - roll diameter: 400 mm - roll length: 1000 mm - rolls: with core bore, with central chamber for water cooling - Rollers mounted on bronze bushes with oil circulation lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tiltable guide plates - stainless steel roller container to hold the mixture - bi-directional rods - safety brake for NOT stop - AC motor: 45 kW - 400 Volt - 50 Hz - Painting: in RAL colours according to customer requirements - new control panel with touch pan ...

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

Lacquered inclined supports 1,60-3,00m á 34,50€/pc. net Inclined supports new , painted 1,60m - 3,00m = 34,50€/ piece Inclined supports new, painted 2,10m - 3,50m. = 35,50€/ piece Inclined supports new, painted 2,30m - 4,10m. = 38,50€/ piece Inclined supports new, galvanized 1,60m - 3,00m = 38,90€/ piece Inclined supports new, galvanized 2,10m - 3,50m = 40,90€/ piece Inclined supports new, galvanized 2,30m - 4,10m = 42,90€/piece Frame for construction supports new, lacquered 70,00€ European Community product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NO.: DE279047055 Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943

coil weight: 2 x 0,15 t clamping range: 265 - 485 mm band width: 200 mm Thickness of sanding paper: 0,1 - 4 mm total power requirement: 0,25 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m - motorized double-turn coiler - newly painted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.