paint booth used for sale

Manufacturer: Bürkle Lackwalze 1416 mm 30 shore , Spare roller: SLC/DAL, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca. 30, Approx. thickness of rubber coating in mm: ca.20, Stahlkerndurchmesser ca. mm: ca.192,

Manufacturer: Sorbini Lackersatzwalze Moosgummi 1300 mm gebraucht muss geschliffen werden, Sorbini: yes, Roller rubber coating: Moosgummi defekt, Rubber coating length cm: 1450, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: ca.210,

Auction-ID: A3-46156-21739

Lying on 3 pallets Auction-ID: A1-49559-60

1X approx 57x37x105cm 1x approx 52x60x117cm Auction-ID: A1-47444-127

Spare roller: SAL 700, Bürkle: Gegendruckwalze, Rubber coating length cm: 720, Approx. thickness of rubber coating in mm: 5, Stahlkerndurchmesser ca. mm: 176,

Manufacturer: Bürkle 1416 mm shore 55 gebraucht muss geschliffen werden Type: Lack-Ersatzwalzen, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1410, Shore Härte: ca 55, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 180, EPDM: yes, Can be reground: yes, Application roller rubber coating mm: ca 20,

Manufacturer: Bürkle Dosierwalze 1415 mm 174 mm D , Bürkle: yes, Roller rubber coating: no, Rubber coating length cm: 1410, Chromium-plated dosing roller mm: 174,

Manufacturer: Bürkle Ersatzwalze 1416 mm shore 30 prüfen muss geschliffen werden, Bürkle: yes, Roller rubber coating: 30, Rubber coating length cm: 1410, Shore Härte: 25, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 180, Wedge follower: yes, Rubber coating defective: no, Application roller rubber coating mm: ca. 240,

Manufacturer: Giardina 1450 mm 20 shore 25 Gummierung Neu, Spare roller: Ölwalze, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 18, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes,

Manufacturer: Giardina Lackwalze 1450 mm 30 shore gerillt Neu, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Creasing on a 1 cm: gerillt, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Riss,

Manufacturer: Giardina Lackwalze 1450 mm Poore Neu NeuGiardina, Spare roller: Öl Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: schleifen,

Manufacturer: Giardina Lackwalze 1450 mm ca 35 shore muss geschliffen werden, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: 18, Approx. thickness of rubber coating in mm: 35, Stahlkerndurchmesser ca. mm: 170, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes,

Manufacturer: Bürkle Walze 1336 mm D= 220 Stahlkern 220, Roller rubber coating: yes, Rubber coating length cm: 1336, Shore Härte: ca 45, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 220,

Ersatzwalze für: TLX, Hymmen: yes, Gummiert Walze: yes, Gummierte Länge cm: 1400, shore Härte: ca.35, Stärke Gummierung ca. mm: 20, Stahkerndurchmesser ca. mm: 215, EPDM: schwarz,

Spare roller: ELX und TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20 Schwarz, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Gummiqualität : neu,

Manufacturer: Bürkle Gegendruckwalze Spachtelmaschine 1400 mm 185 Durchmesser, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 52, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Bürkle Gegendruckwalze SLC 1300 neu Gummiert shore 80, Bürkle: yes, Rubber coating length cm: 1300 mm, Approx. thickness of rubber coating in mm: ca,7 mm, Stahlkerndurchmesser ca. mm: 170,

Manufacturer: Hymmen Stahldosierwalze Chromwalze 1400 mm 197 Durchmesser, Hymmen: yes, Roller rubber coating: Chrom, Approx. thickness of rubber coating in mm: Stahl 1400 mm, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Bürkle Stahldosierwalze 174 mm Länge 1416 mm muss verchromt werden, Bürkle: yes, Stahlkerndurchmesser ca. mm: 174 mm, Total lenght mm: 1416,

Manufacturer: Hymmen Lackwalze für TLX Länge mm 1400 shore 60 Walze muss geschliffen werden, Spare roller: TLX, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Shore Härte: 60, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: 215, Wedge follower: yes, Rubber coating defective: yes,

Manufacturer: Hymmen Lackauftagswalze, Bürkle: yes, Rubber coating length cm: 1398, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Sponge rubber: yes,

Manufacturer: Bürkle Walzenkern 1415 mm shore 65 gumm 12 mm, Bürkle: yes, Roller rubber coating: yes, Shore Härte: 60, Approx. thickness of rubber coating in mm: 12, Stahlkerndurchmesser ca. mm: 197, EPDM: Poleurethan,

Manufacturer: Bürkle Lackauftragswalze 1416 mm shore 35 gerillt Zustand gut, Spare roller: SLC DAL, Bürkle: yes, Roller rubber coating: yes, Shore Härte: 35, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 189, Creasing on a 1 cm: ca.80, Wedge follower: yes,

Manufacturer: Bürkle Chromwalze beheizbar 1416 mm/184, Spare roller: SLC 1300, Bürkle: yes, Roller rubber coating: no, Shore Härte: ca 60, Total lenght mm: 1416,

Manufacturer: Bürkle Stahldosierwalze 1415 mm 234 Durchmesser, Spare roller: Spachtelwalze, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1300,

Manufacturer: Bürkle SLC Dosierwalze 1416 mm Neu 174 Durcmesser mm Beheizbar, Spare roller: Dosierwalze, Bürkle: Neu, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1416 mm, : SLC, : 174, : Chrom,

Manufacturer: Bürkle Gegendruckwalze 1300 mm 8 mm Gummi shore 80 muss geschliffen werden, Bürkle: JA, Roller rubber coating: yes, Rubber coating length cm: 1300, Shore Härte: ca.80, Stahlkerndurchmesser ca. mm: ca.170,

Length: , mm Width: , mm Height: , mm Door painting trolley --------------- TLW 120: Price EUR 695.00 Painting trolley for doors incl. 2 pick-up forks - Door weight up to 120 kg - Door size max.2400x1200 mm Technical data Dimensions (min.) L x H x W 1330 mm x 910 mm x 610 mm Dimensions (max.) L x H x W 2600 mm x 910 mm x 610 mm Load capacity up to 120 kg Weight 24 kg --------------- TLW 200: Price EUR 985.00 Painting trolley for doors - Door weight up to 200 kg - Door size max.2800x1400 mm Technical data Dimensions (min.) L x H x W 1460 mm x 970 mm x 1100 mm Dimensions (max.) L x H x W 3360 mm x 970 mm x 1100 mm Load capacity up to 200 kg Weight 42 kg Extension set for TLW 200: Price EUR 190.00 for maximum door lengths up to 3600 mm --------------- Prices of the above-mentioned painting trolleys on request! plus packaging and shipping --------------- Further technical details as an attac ...

Length: 2700 mm Width: 1100 mm Height: 850 +- 150 mm engine output: 0,37 kW Electric capacity: 0,5 kw compressed air: 6 bar Horizontal impregnation system Pro flow for individual parts with rinsing circuit. --------------------------------- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. --------------------------------- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blo ...

A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.

paint can vacuum cabinet; cleaned and tested; suitable for paint cans up to 2.5 kg; new windscreen; Incl. Colour stirrer Easymix. Color can vacuum cabinet; cleaned and checked; used for cans till 2.5 kg; new front panel; incl. Ink mixer Easymix.

rate of flow: 34 l/min : 28 : 1 : 7 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paint booth with extraction device and cabinet Item: Paint booth with suction device and cabinet Dimensions paint booth: 72 cm wide, 60 cm deep and 80 cm high Cabinet dimensions: 72 cm wide, 109 cm deep and 100 cm high Number of drawers: 6 Colors: green and black Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

S58 - used approx. 67 m³ / 67.000 L steel tank, standing. Technical details: Content: approx. 67 m³ / 67,000 litres Material: Steel tank single-walled Manufacturer: GEMS Metaalwerken Dimensions: approx. Ø 3.00 m × H Tank 9.90 m / H incl. railing 11.50 m Other: Used steel tank, professionally cleaned and in good condition. Vertical storage tank with flat bottom, dome on the tank body and on top of the roof, several inlets and outlets. Tank repainted from the inside in reddish brown (with a paint for the interior paint Brantho-Korrux "3 in 1", anti-rust paint, metal protection paint, maintenance paint, Brantho-Korrux 3in1 may be used according to the regulations of the Federal Health Office (XL) for the interior coating of food containers and food processing machines (tested by Lab. Dr. Kittel 01/1989). Only the pure tank is sold, without add-on parts such as pipes, fit ...

The machine is in very good condition and ready for operation. An on-site inspection is possible.

The system was used to paint glass bottles. It has two spray booths and a dryer with liquid gas. Temperature 170/180 degrees C. Size: 3.80 meters wide, about 11 meters long. Works perfectly. Has been constantly maintained. Many spare parts with him.

Paint mixer Busch FM 20; cleaned and tested; Capacity 20kg; with 2nd paint pot. Ink mixer Busch FM 20; cleaned and checked; capacity 20 kg; with secound ink pot.

General SKU396U1161 LocationBarneveld MakeAzo Main Features MaterialStainless steel Volume2000 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity2000Ltr (1000 Ltr. 2x) Diameter1100 mm Conical bottomcheck Flat topcheck With covercheck Manholecheck Outlet with vibro bottomcheck Outlet with valvecheck MaterialStainless steel 1.4301 (304) With jacketcheck General TypeVB 800 B Year of construction1996 Extra Specificationsequipped with a dosing screw. Brand Azo. Type DFS100x 650.Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicAZOIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine ch ...

General SKU205M542 MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Mounted on framecheck Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. MaterialStainless steel 1.4435 (316L) General LocationBarneveld Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressurePaints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & ino ...

General SKU120X675 MakeVMA-Getzmann TypeDispermat 5 No.601-9814889 Year of constructionunknown, Milling chamber made of glass Mounted on framecheck Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace0,9x0,6 M Total height1,5 M Weight175 KGPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicVMA-GetzmannIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand millsIndustries  ...

General SKU301W572 LocationBarneveld MakeWab Bachofen TypeKD15 Main Features MaterialStainless steel Volume15 Ltr. Motor22 KW Specified Features - Sand mill Horizontal sand millcheck Capacity15 l Housing dimensions Dia. 220 mm , length 430 mm InletDia. 30 mm OutletdIA. 30 MM Motor22 kW, 3x 500 volt MaterialStainless steel 1.4435 (316L) General No.740364 Year of construction1973 Floorspace0,75x1,00 m Total height1,60 m Weight590 kgPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicWab BachofenIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersMills > Sand millsIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndu ...

General SKU379T1136 MakeDrais LocationBarneveld TypePML-V+H Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.3 KW Specified Features - Sand mill Capacity1,2 Ltr. Inlet9,5 Outlet9,5 With jacketcheck Motor3,3 kW Rotor speed2900 rpm With pumpStober RD11G-1005-012-4 Motor0,12 kW 220/380 (Ex) With variable speed drivecheck MaterialCeramic, Stainless steel 1.4571 (316Ti) With jacketcheck General No.54 310 Year of construction1992 With switchcheck With switchgear(as is) Floorspace1,2x0,9 m Total height0,7 m Weight340 kg ATEX designedcheck Extra Specificationsthe machine comes with many additional partsPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicDraisIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Starc ...

General SKU305U624 MakeStarick Fördertechnik GmbH TypeLS3 / BAV1200 No.1821.2694.01.05 Year of construction2005 LocationBarneveld Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume3000 Ltr. Pressure1 Bar Specified Features - Silo Silocheck Closedcheck Capacity3 m³ Diameter2000 mm Cylindrical height500 mm Conical height1310 Conical bottomcheck Dished topcheck ManholeDN300 InletDN200 Top connectionsDN600, DN500 Outlet with vibro bottom0,80 kW, 400Volt (EX) OutletDN200 Half coil jacketedcheck MaterialStainless steel 1.4301 (304) With jacketcheck General Total height4,42 m Weightca. 500 kg CEcheck ATEX designedcheck Extra SpecificationsThis silo comes complete with dust filter and rotary valve.Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDet ...

General SKU292W971 MakeDynomill TypeECM-pilot No.050917 Year of construction2005 LocationBarneveld Main Features MaterialStainless steel Volume1.5 Ltr. Motor7.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity1,5 l Housing dimensions ø 130 x 150 mm Inletø 20 mm Outletø 20 mm With sievecheck With mechanical sealcheck With jacketcheck Motor7,5 kW, 400 V, (Ex), 1445 rpm Rotor speed2895 rpm With pumpcheck MaterialStainless steel 1.4301 (304) With jacketcheck General With switchcheck Floorspace0,68 x 0,74 m Total height0,58 m Weight400 kg CEcheck ATEX designedcheck Extra Specificationsmounted on table.cap. 10-200 l/h, cooling water consumption 800 l/hPaints & coatingsStarchCatalysts & fillersSand millsDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicDynomillIndustries > Chemical > Paints & coat ...

General SKU319U747 LocationBarneveld Main Features MaterialMild steel/Stainless steel Motor0.15 KW Specified Features - Bag dump station With hoppercheck Capacity± 700 Ltr. Hopper sizes1050x550x2080 mm Inlet500x 920 mm OutletDia. 200 mm With vibro motor0,15kW, 380Volt Bag dump stations MaterialStainless steel 1.4301 (304) General MakeRussel Type17900 Year of constructionunkown Mounted on framecheck With switchgear(as is) Floorspace1,4 x 2,2 m Total height3,4 m Weight1030 kg Extra SpecificationsContainer emptying station equipped with air cylinders to tilt the container.The hopper lid can be opened with an air cylinder.Stainless steel input hopper: 1050x550x2080 mmContainer spot on the platform: 1200x1100 mmPlatform height: 2010 mmPaints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchRubberAgrochemicalsSpicesPlastic & polymersBag  ...

General SKU397W1230 LocationBarneveld MakeCoperion TypeWZK 102 P1 CR Pressure Working pressure shell4 Bar Main Features MaterialAluminium Inlet diameter100 mm Specified Features - Diverter valve MaterialAluminium With jacketcheck General No.109557 Year of construction2005 Floorspace0,80x0,55 m Total height0,35 m Weight100 kg Extra Specifications1x input dia. 100mm, 2x output, dia. 100mmPaints & coatingsPowdered foodsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersDiverter valvesCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicCoperionIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Foo ...

General SKU397W1229 LocationBarneveld MakeCoperion TypeWZK102-(production area 1)-CR Main Features MaterialAluminium Inlet diameter100 mm Specified Features - Diverter valve Capacity4 bar MaterialAluminium With jacketcheck General No.119741 Year of construction2005 Floorspace0,80x0,55 m Total height0,35 m Weight100 kg Extra Specifications1x input dia. 100mm, 2x output, dia. 100mm,allowable temperature 100°CPaints & coatingsPowdered foodsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersDiverter valvesCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicCoperionIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chem ...