129,676 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 8579 Type:- Producer:- Created: 2005 Parameters: The facility consists of: Curing furnace (natural gas) GALATEK Powdering system ITW Gema AG AS0 2 Drying room (natural gas) GALATEK Spray booth GALATEK PKPF Mini Filter cabinet GALATEK AA.U.
rate of flow: 34 l/min : 28 : 1 : 7 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
S58 - used approx. 67 m³ / 67.000 L steel tank, standing. Technical details: Content: approx. 67 m³ / 67,000 litres Material: Steel tank single-walled Manufacturer: GEMS Metaalwerken Dimensions: approx. Ø 3.00 m × H Tank 9.90 m / H incl. railing 11.50 m Other: Used steel tank, professionally cleaned and in good condition. Vertical storage tank with flat bottom, dome on the tank body and on top of the roof, several inlets and outlets. Tank repainted from the inside in reddish brown (with a paint for the interior paint Brantho-Korrux "3 in 1", anti-rust paint, metal protection paint, maintenance paint, Brantho-Korrux 3in1 may be used according to the regulations of the Federal Health Office (XL) for the interior coating of food containers and food processing machines (tested by Lab. Dr. Kittel 01/1989). Only the pure tank is sold, without add-on parts such as pipes, fit ...
The machine is in very good condition and ready for operation. An on-site inspection is possible.
Paint mixer Busch FM 20; cleaned and tested; Capacity 20kg; with 2nd paint pot. Ink mixer Busch FM 20; cleaned and checked; capacity 20 kg; with secound ink pot.
The system was used to paint glass bottles. It has two spray booths and a dryer with liquid gas. Temperature 170/180 degrees C. Size: 3.80 meters wide, about 11 meters long. Works perfectly. Has been constantly maintained. Many spare parts with him.
- Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %
- Producer Schuko - Type FATi-SR 200/30 - Width ~ 3000 mm - Height ~ 2.100 mm - Height with ventilator 2.690 mm - Depth ~ 900 mm - Trockenabsaugung - With filter mat - With paper prefilter - With exhauster - Ventilation system performance, exhaust fan 8.900 m³/h - Motor power 2,6 kW - Exhaust pipe 350 mm - Without switch - Ausführung/Schutzart EExe ii, T3 - In zinc plated steel - Voltage / HZ 400/50 - Location on stock
A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.
Manufacturer: LUTRO Model: KSP 6 BT Year of Manufacture: 2013 Maximum Vehicle Length: 5 m Maximum Vehicle Width: 3 m Maximum Vehicle Height: 3 m Maximum Roof Load: 700 kg Usable Area: 105 m² Total Room Volume: 144 m³ Air Capacity: 24,250 m³/h Air Speed: 0.26 m/s Fan Power: 8.26 kW Heating Output: 280 kW Maximum Temperature: 80 °C Gas Throughput: 280,000 kJ/h Gas Consumption (Full Load): 11.4 m³/h Fresh Air Requirement: 90 m³/min Minimum Burn Time: 1 min Certification: CE Find more here - / Contact us at -
Metal cabinet painted light grey 2-door, approx. 97x194h cm, 4 shelves, without contents
Filling Line: IMMEA DSP 40 R – Weight filling of paint cans with integrated analogue scale, roller conveyor, dosing head and feed hopper Serial Number: 907 Order: Emergency stop, dosing controls, electrical box with main disconnect switch and 24VDC power supply Mixer: GRENIER-CHARVET Type PR 300 – Vertical central shaft mixer with mechanical speed variator, three-phase electric motor, up/down control and dedicated electrical panel with rotary disconnect and Siemens switchgear Mixer serial number: 10981 Hopper: Upper metal product feed hopper with gravity outlet to the dosing head Tanks: 4 mobile stainless steel tanks on wheels, equipped with side handles and threaded drain valves Auction-ID: A1-44895-14
maximum number of results exceeded
please refine your search
