paint booth used for sale

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...

Paint shop Memmingen: Paint booth, special size: Make : LUTRO Year of manuf.: 1995 / 2017 - new units and pipelines, LED lighting, etc. Dimensions : 5.6 m x 9.48 m x 4.7 m (approx. WxLxH), total height 5.5 m Supply air blanket : Filter ceiling Lamps : 2x4 pcs LED inclined recessed luminaires + 2x3 LED wall recessed luminaires on the side Entrance side : Roller shutter 5.3 m x 4.2 m (approx. WxH) Exit side : Sliding gate (fire protection gate) is not included in the scope of delivery Escape door: 3 pieces: 0.95 m x 3.0 m; 0.95 x 2.0 m; 0.75 x 2.0 m (approx. WxH) Rusting : without rusting, without substructure, we have ev. Grates in stock Heating unit : approx. 250 kW, gas surface burner Energy saving: Heat recovery Dry temperature: 80 degrees C Supply air unit : approx. 22,000 m3/h Exhaust air unit : approx. 22,000 m3/h Pipelines : supply and exhaust air pipes, deflec ...

Rolls 0.5m x 20m 1.5m x 20m 2.0m x 20m 2.5m x 20m 3.0m x 20m 9,50€ / SQM

Impeller D.477 with ceramic paint YYKM250RNA/75/CS-5 1-Y400741 for CAPRARI PUMP KCM250TA+180042N1/SF – 496930/2 8211805 - 2 pcs

Paint dosing system from Fluid Solution incl. software

High pressure pump / Airless paint sprayer With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Qty. 1 Second-hand vertical profile painting cabine The equipment is designed for automatic electrostatic spraying of powder paints and varnishes onto long metal products and must be built into a production line equipped with an overhead single-rail closed ring conveyor. Mfc.: TRASMETAL Built: Main technical characteristics Maximum profile size: Width: 120 mm Height: 8,000 mm Length (axial along the conveyor): 350 mm Equipment exhaust ventilation: 24,000 m3/hour Compressed, dried and purified air (water - maximum 1 g / m3, oil - maximum 0.01 ppm / m3) Total flow: 530 m3/hour Pressure: 7 bar Electricity: 380 V, 50 Hz, 3 ph. Power: 235 kW

Manufacturer: Bürkle SLC Dosierwalze Neu 174 Durcmesser mm 1416 mm, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1416, : SLC, : 174, : Chrom,

Manufacturer: Bürkle, Type: Dosierwalze, UV-laquer roller: yes, Widht of metering roller: 1300, für Maschine: SLC, shore: Chrom,

Manufacturer: Bentec, Spare roller: pneumatische, lackschonende Doppelmembranpumpe ,

Manufacturer: Giardina Ersatzwalze 1452 shore 60 Gummi 20 mm Neu, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1452, Shore Härte: 60, Approx. thickness of rubber coating in mm: 25,

Sorbini: yes, Rubber coating length cm: 1450, Shore Härte: 25, Approx. thickness of rubber coating in mm: 10, Stahlkerndurchmesser ca. mm: ca 220,

Sorbini: yes, Rubber coating length cm: 1310,

Manufacturer: Giardina Lackwalze 1450 mm 55 shore Neu, Giradina: yes, Rubber coating length cm: 1450, Shore Härte: 50, Approx. thickness of rubber coating in mm: ca.20, Stahlkerndurchmesser ca. mm: 190,

Manufacturer: Wiwa Leimpumpe, Rubber coating length cm: 1416, Shore Härte: 50, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 196,

Manufacturer: Bürkle Lackersatzwalze 1356 shore 60 Gummierung Neu, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1356,

Manufacturer: Sorbini Moosgummiwalze, Sorbini: yes, Rubber coating length cm: 1298, Shore Härte: Moosgummi alt,

Used production line for paints and varnishes from Diamac. The line includes: -2 x dissolver stationary 50hp, 1500 litres: diamac - industrial tyntometer: diamac (installation brand new, never used) - stationary mixer diamac 30hp inverter - stationary mixer slow speed diamac 10hp - column disolver diamac 15hp inverter - laboratory disolver diamac 2hp inverter - immea semi-automatic controller/ filler model dpc/5/30 - dust filter, pneumatic brand: wam - volumetric pumps for resin transport/dosing brand: pedrollo additional: - documentation, operating instructions, "ce" safety certificates, etc.

Paint mixer Busch FM 20; Capacity 20kg; mobile. Ink mixer Busch FM 20; capacity 20kg; mobile.

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

Paint dosing pump, chemical pump FEINPRÜF F16 20 92500036 shaft diameter: Ø 20 mm Flange diameter: Ø 57 mm New ! Dimensions: 122 x 80 x 142 mm

Manufacturer: Bürkle Moosgummiwalze 1416 mm ca. Poore 2 gebraucht muss geschliffen werden, Spare roller: DAL SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Approx. thickness of rubber coating in mm: 20,

CMA 5-axis painting robot mod. ROBY 5EX-R - used - N. 5 controlled axes - N. 3 supports - Wrist capacity 3 kg - Self-learning programming -Merry-go-round Number of arms 3 Single arm capacity 25 kg - Workpiece Wheel Servo movement controlled and synchronized - Complete with manual and CE declaration - RETROFIT 2024 (NEW OVERHAUL)

The painting line is designed for varnishing elements made of MDF or HDF board. Spray booths have two circuits: one for clear coat and the other for color paint. The line is designed for water-based UV varnishes. The line consists of the following elements: - feeding table with an automatic robot from the Italian company NEOMEC - transport table with a cleaner - shower cabin from the Italian company GIARDINI DUALTECH 416 r.2017 - drying tunnel with IR lamps pcs.2 pcs - UV tunnel - roller conveyor - turntable - transport table - transport table with a cleaner - automatic painting machine - drying tunnel with IR lamps pcs.2 pcs - UV tunnel - roller conveyor - receiving table with a robot from the Italian company NEOMEC

Paint mixer Busch FM 12; good condition; cleaned and tested; Capacity 2-12kg; including scale and tilting frame; optionally with 2nd pot and 2nd stirring rod. Ink mixer Busch FM 12; good condition; cleaned and checked; capacity 2-12kg; included scale and tilting frame; for option with secound ink container and secound mixing arm.

Manufacturer: Bürkle Stahldosierwalze 1415 mm 174 D mm, Spare roller: Dosierwalze, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1415,

Manufacturer: Hymmen Ersatzwalze 1400 mm Muss gummiert werden, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1400, Stahlkerndurchmesser ca. mm: ca 200, Rubber coating defective: yes, Can be reground: no,

Manufacturer: Schiele, Type: Vaccumat Master, Year: 2002, Control: Siemens S 7, Spraying heads - total: 2, Lackheizung: yes, Unterdrucküberwachungt: yes, Lackrückführungt: yes, Year :2002

Manufacturer: Giardina 1450 mm 40 shore 10 Gummierung , Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Approx. thickness of rubber coating in mm: 10,

Manufacturer: Giradina Lackersatzwalze 1300 shore 35, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1300, Approx. thickness of rubber coating in mm: ca 25,

Manufacturer: Bürkle Lackwalze 1416 mm 30 shore 25 Gummi Gerillt , Roller rubber coating: gerillt, Rubber coating length cm: 1416, Shore Härte: 30,

Manufacturer: Bürkle Lackauftragswalze shore 60 Länge 1336 mm NEU, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 60, Approx. thickness of rubber coating in mm: ca.20,

Manufacturer: Giradina Lackwalze, Type: gelaufen in Maschine BMG/95/07, Year: 1998, Year :1998

Manufacturer: Giardina Lackwalze 1450 mm 60 shore gerillt Neu, Giradina: yes, Roller rubber coating: 1450, Shore Härte: 60, Approx. thickness of rubber coating in mm: ca.30, Creasing on a 1 cm: gerillt,

Manufacturer: Bürkle Stahldosierwalze 1415 mm 174 D mm, Spare roller: Dosierwalze, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1415, : SLC, : 174, : Chrom,

Manufacturer: Bürkle Lackauftragswalze 1415 mm shore 60 25 mm Gummi , Bürkle: yes, Rubber coating length cm: 1416, Shore Härte: 60, Approx. thickness of rubber coating in mm: 25,

Manufacturer: Bürkle Lackersatzwalze 1416 mm shore 50 Gummi muss geschliffen werden, Spare roller: DAL SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 50, Approx. thickness of rubber coating in mm: ca.25,

Manufacturer: Bürkle Lackwalze 1416 mm 30 shore muss geschliffen werden, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca 30, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 186,

Manufacturer: Bürkle Lackersatzwalze 1416 mm 40 shore neu geschliffen, Spare roller: DAL SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 197,

Manufacturer: Bürkle Lackgiessanlage, Control: hand, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Operating side: links, Working height: 920, Pump system: Rührwerk, FREE TEXT: bald verfügbar,

Manufacturer: Bürkle SLC Dosierwalze 1416 mm Neu 174 Durcmesser mm Beheizbar, Spare roller: Dosierwalze, Bürkle: Neu, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1416 mm, : SLC, : 174, : Chrom,

Manufacturer: Bürkle, Spare roller: für SAS, : yes, : SLS 1300, : ca. 198, : yes, : 20, : ca.60 Gummierung Neu,

Spare roller: SLC, Bürkle: yes, Stahlkerndurchmesser ca. mm: 186, Total lenght mm: 1300,

Hersteller : Giardina, Spare roller: UV Walze, Giradina: yes, Roller rubber coating: yes, Rubber coating length cm: 1450, Shore Härte: ca.30, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 170, EPDM: Poore 2, Diameter of neck: 30-40-60/40-60, Total lenght mm: 1820, Wedge follower: yes, Rubber coating defective: Neu,

Manufacturer: Bürkle Lackauftragswalze 1416 mm shore 30 Gelasert 80 Gang, Spare roller: DAL SLC, Bürkle: yes, Hymmen: yes, Roller rubber coating: yes, Rubber coating length cm: 1415, Shore Härte: 30, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 210, Creasing on a 1 cm: yes, Wedge follower: yes,