paint booth used for sale

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

Industriële spuitcabine volledig bovengronds, eenvoudige prefabconstructie binnenafmetingen: - 10 meter lang - 4,5 meter breed - 3 meter hoog Sleuf in het dak waardoor het mogelijk is om werkstukken met een bovenloopkraan naar binnen te brengen.

Dimensions (L/W/H): 2300 x 700 x 1300 mm Air consumption: 3500 m³/h Motor output: 1,5 kW weight of the machine ca.: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Work surface 2,000 x 1,500 mm Filter area primary/secondary 3.5 m² / 3 m² Volume flow max. 6,000m³/h with total pressure loss (suction and discharge side) 515 Pa Fans each 1 x 1.5 kW right and left Suction nozzle Ø 400 mm (centre) Weight approx. 240 kg Including electro-pneumatic energy-saving flap (already installed) and wall holder for spray gun with interrogation switch "hooked in"

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...

Power: N/C; heating registers for supply air ceiling + 2 drying zones Operating parameters: O-structure; approx. 12 material frame supports; frame length 3,500 mm; frame width 600 mm; 2 opposite painting surfaces; 1 longitudinal roller conveyor; cross conveyors in drying zones; capacity approx. 2 frame elements per drying zone Workpiece capacity: Frame elements/components up to 3,500 mm length; continuous infeed/outfeed system Supported edges: Wood, metal or industrial components (typ. spray application) Edge types: Spray painting; airless + fine spray application; drying Included equipment: Type designations TR3750; GT180/3500/4100/CT; TR377; Serial No. 04019/250; 6x WALTER pump stations; 6x WAGNER fine spray guns; 3x WAGNER airless pumps w/ hand guns; 8x explosion-proof lamps (supply air ceiling); 2 painting stands w/ floor extension; integrated heating registers; conveyor s ...

Painting booth: Make : Wolf Taifuno Dimensions: 4.0 m x 8.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH) Roller door: 6.0 x 2.2 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x15 pcs. 790x495 mm, support rod 790x50x3 mm Heating unit: 209 kW, gas burner Dry temperature: 80 degrees C Supply air unit: 24,800 m3/h; 11 kW; 1000 rpm, V-belt Exhaust unit: 24,300 m3/h; 11 kW; 1000 rpm, V-belt Energy saving: speed control with frequency inverter and heat recovery Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin, double dryer: Dimensions: 5.1 m x 7.0 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. r ...

S58 - used approx. 67 m³ / 67.000 L steel tank, standing. Technical details: Content: approx. 67 m³ / 67,000 litres Material: Steel tank single-walled Manufacturer: GEMS Metaalwerken Dimensions: approx. Ø 3.00 m × H Tank 9.90 m / H incl. railing 11.50 m Other: Used steel tank, professionally cleaned and in good condition. Vertical storage tank with flat bottom, dome on the tank body and on top of the roof, several inlets and outlets. Tank repainted from the inside in reddish brown (with a paint for the interior paint Brantho-Korrux "3 in 1", anti-rust paint, metal protection paint, maintenance paint, Brantho-Korrux 3in1 may be used according to the regulations of the Federal Health Office (XL) for the interior coating of food containers and food processing machines (tested by Lab. Dr. Kittel 01/1989). Only the pure tank is sold, without add-on parts such as pipes, fit ...

Paint pouring machine, paint pouring machine, paint pouring station, paint pump, emulsion pump, dosing pump -Gearbox: Stöber Type R27-0000-110-4 -Speed: 800 - 1820 rpm -Engine: HEW type EEXF-S/4 -Power: 1.1 kW -Dimensions: 300/400/H935mm -Weight: 43kg

Airless sprayer, painting device, spray pack, paint sprayer, paint spray system -Manufacturer: Wagner, paint sprayer paint spray system -Type: W 100 -Use: for varnishes and glazes -Area performance: 5 m² / 12 min -Dimensions box: 300/140/H260 mm -Weight: 1.5 kg

Length: , mm Width: , mm Height: , mm Door painting trolley --------------- TLW 120: Price EUR 695.00 Painting trolley for doors incl. 2 pick-up forks - Door weight up to 120 kg - Door size max.2400x1200 mm Technical data Dimensions (min.) L x H x W 1330 mm x 910 mm x 610 mm Dimensions (max.) L x H x W 2600 mm x 910 mm x 610 mm Load capacity up to 120 kg Weight 24 kg --------------- TLW 200: Price EUR 985.00 Painting trolley for doors - Door weight up to 200 kg - Door size max.2800x1400 mm Technical data Dimensions (min.) L x H x W 1460 mm x 970 mm x 1100 mm Dimensions (max.) L x H x W 3360 mm x 970 mm x 1100 mm Load capacity up to 200 kg Weight 42 kg Extension set for TLW 200: Price EUR 190.00 for maximum door lengths up to 3600 mm --------------- Prices of the above-mentioned painting trolleys on request! plus packaging and shipping --------------- Further technical details as an attac ...

Industrial Welding / Painting Curtain Screen System Type: Industrial protective curtain screen / working area separation system Application: Welding area protection, painting area separation, dust and splash containment Structure: Steel frame with overhead sliding curtain rails Curtain type: Flexible industrial protective curtains Frame colour: Orange / grey Installation: Floor-mounted / fixed industrial booth structure Configuration: Multi-panel curtain enclosure with sliding or movable curtains Manufacturer: Not visible Model: Not visible Dimensions: To be confirmed on site Condition: Used Functionality not tested Description This industrial curtain screen system is designed to separate and protect working areas in production environments. It can be used as a welding screen enclosure, painting area divider, splash protection screen or general industrial w ...

Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

Make : Wolf Built: 1995 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 7 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH), 2 pieces right and left Roller door: 6.0 x 2.5 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x13 pcs. 790x495 mm Transverse travel unit: 8 pcs trolleys Heating unit: 267 kW Burner : Gas burner Dry temperature: 80 degrees C Supply air unit: 22,800 m3/h; 7.5 kW; 960 rpm, V-belt Exhaust unit: 22,500 m3/h; 7.5 kW; 960 rpm, V-belt Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin: Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. recessed lamp with 4 x 58 W each Entrance side: 2-le ...

Make : Wolf Built: 1988 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.0 m (approx. WxH) Roller door: 6.0 x 2.3 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting, support rod 1200x40x3 mm Lifting platform : was defective, was scrapped Heating unit: 209 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust unit: 22,000 m3/h; 7.5 kW Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Nuremberg area Sales price: € 11,990,- net from location incl. dismantling We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, light ...

LUTRO painting booth diagonal ventilation on the side: Make : LUTRO Built: 1996 Dimensions: 4.0 m x 6.5 m x 3.5 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 3 pcs recessed luminaires with 4 x 58 W each Entrance gate: 2.4 x 3.5 m (approx. WxH) Escape door: 0.6 m x 3.5 m (approx. WxH) Heating unit: 200 kW with Abig gas burner Dry temperature: 80 degrees C Supply air unit: 12,300 m3/h; 5.5 kW Exhaust unit: 12,000 m3/h; 5.5 kW Suction register: 2 pieces on the side, 2.6 x 1.1 m (approx. WxH) Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location: Friedrichshafen area Sell price: € 9,990,-, net from location without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, ...

Painting booth for switching to dryer operation: Make : LUTRO Type : KSP7-BT Built: 1993 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps : LED, 2 x 4 pcs recessed luminaires with 3 x each ? W Entrance side: 2-leaf gate 2.3 m x 2.8 m (approx. WxH) Escape door: 0.6 m x 2.3 m (approx. WxH) Rusting: 5,620 x 1,910 mm (approx. WxD), 22 pieces 950x510 mm Heating unit: 242 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust unit: 22,000 m3/h Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Schwaz, Austria Sales price: € 9,990,- net, from location, without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, grating ...

Paint booth Wolf-Taifuno: Make : Wolf, Type 4/B, Taifuno Year of manuf.: Cabin 2011, Aggregate 2009 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pc recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x40x3 mm Heating unit : 209 kW Energy saving : Speed control with frequency converter and heat recovery Dry temperature : 80 degrees C Oil burners : Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Pipelines : Supply and exhaust air pipes, deflecto ...

Paint booth: Make : Wolf Year of manuf.: Cabin 2011, Aggregate 1993 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pcs recessed luminaires with 3 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x50x3 mm Heating unit : 267 kW Oil burners : ELCO brand, alternatively gas burners Dry temperature: 80 degrees C Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 22,800 m3/h; 7.5 kW, 960 1/min Exhaust air unit : 22,500 m3/h; 7.5 kW, 960 1/min Pipelines : Supply and exhaust air pipes, deflector hood, air intake curve Electrics : Control cabinet The paint booth was originally a Wolf drying booth, but wi ...

Paint booth with extraction device and cabinet Item: Paint booth with suction device and cabinet Dimensions paint booth: 72 cm wide, 60 cm deep and 80 cm high Cabinet dimensions: 72 cm wide, 109 cm deep and 100 cm high Number of drawers: 6 Colors: green and black Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

1st package of painted props = 3.340,50€ package price 350 x Props painted 1.60 - 3.00m, used = 8.50€/piece 43 x Props painted 2.00 x 3.50m, used = 8.50€/piece Including 8 x stacking rack, used 1st package of galvanized props = 2.040,00€ package price 133 x Galvanized prop, used 1.60- 3.00m = 15.00€/piece 2 x Galvanized prop, used 2.20 - 4.00m = 15.00€/piece 1 x galvanized prop, used 2,50 - 4,50m = 15,00€/piece Including 3 x stacking rack, used Only available in a package! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration C ...

Lot 4-WORK Professional Work Gloves Sandy Grip EN388 (14400 pairs) Specifications: Brand: 4-WORK Type: Work Gloves Sandy Grip Standard: EN388 Coating: Latex Sandy Grip Sizes: 9 / 10 / 11 (approximately evenly distributed) Content: 14400 pairs Packaging: 60 boxes of 240 pairs Features: Latex grip coating suitable for wet and dry work Breathable and flexible material Optimal tactile sensitivity Packed per full box Particularities: Large batch suitable for intensive use and resale Widely applicable in construction, industry, logistics and maintenance Sale concerns a bulk batch Auction-ID: A1-47443-204

Lot 4-WORK Professional Work Gloves Sandy Grip EN388 (14400 pairs) Specifications: Brand: 4-WORK Type: Work Gloves Sandy Grip Standard: EN388 Coating: Latex Sandy Grip Sizes: 9 / 10 / 11 (approximately evenly distributed) Content: 14400 pairs Packaging: 60 boxes of 240 pairs Features: Latex grip coating suitable for wet and dry work Breathable and flexible material Optimal tactile sensitivity Packed per full box Particularities: Large batch suitable for intensive use and resale Widely applicable in construction, industry, logistics and maintenance Sale concerns a bulk batch Auction-ID: A1-47443-3

Lot 4-WORK Professional Work Gloves Sandy Grip EN388 (14400 pairs) Specifications: Brand: 4-WORK Type: Work Gloves Sandy Grip Standard: EN388 Coating: Latex Sandy Grip Sizes: 9 / 10 / 11 (approximately evenly distributed) Content: 14400 pairs Packaging: 60 boxes of 240 pairs Features: Latex grip coating suitable for wet and dry work Breathable and flexible material Optimal tactile sensitivity Packed per full box Particularities: Large batch suitable for intensive use and resale Widely applicable in construction, industry, logistics and maintenance Sale concerns a bulk batch Auction-ID: A1-47443-203

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Paint booth: The paint booth is a special system Make : Wolf Year of construction : Cabin 2011 Dimensions : 4.5 m x 4.8 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 2 recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Base system with full surface rusting Heating : approx. 200 kW electrically heated, but can be replaced by an oil or gas powered unit Dry temperature: 80 degrees C Supply air unit : 18,500 m3/h; 7.5 kW Exhaust air unit: 18,500 m3/h; 7.5 kW Pipelines : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Hanover Area Retail price : € 17.500,-, net ex site without dismantling

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

Paint shop Memmingen: Paint booth, special size: Make : LUTRO Year of manuf.: 1995 / 2017 - new units and pipelines, LED lighting, etc. Dimensions : 5.6 m x 9.48 m x 4.7 m (approx. WxLxH), total height 5.5 m Supply air blanket : Filter ceiling Lamps : 2x4 pcs LED inclined recessed luminaires + 2x3 LED wall recessed luminaires on the side Entrance side : Roller shutter 5.3 m x 4.2 m (approx. WxH) Exit side : Sliding gate (fire protection gate) is not included in the scope of delivery Escape door: 3 pieces: 0.95 m x 3.0 m; 0.95 x 2.0 m; 0.75 x 2.0 m (approx. WxH) Rusting : without rusting, without substructure, we have ev. Grates in stock Heating unit : approx. 250 kW, gas surface burner Energy saving: Heat recovery Dry temperature: 80 degrees C Supply air unit : approx. 22,000 m3/h Exhaust air unit : approx. 22,000 m3/h Pipelines : supply and exhaust air pipes, deflec ...

Paint pot for Busch FM 12 paint mixer; Capacity 2-12kg; Incl. Stirrer. Ink container for ink mixer Busch FM 12; capacity 2-12 kg; included mixing arm.

paint can vacuum cabinet; cleaned and tested; suitable for paint cans up to 2.5 kg; new windscreen; Incl. Colour stirrer Easymix. Color can vacuum cabinet; cleaned and checked; used for cans till 2.5 kg; new front panel; incl. Ink mixer Easymix.

Paint mixer Busch FM 20; cleaned and tested; Capacity 20kg; with 2nd paint pot. Ink mixer Busch FM 20; cleaned and checked; capacity 20 kg; with secound ink pot.

General SKU292W496 MakeNetzsch TypeLMZ25 No.204449 Year of construction1992 Mounted on framecheck Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume25 Ltr. Motor37 KW Specified Features - Sand mill Horizontal sand millcheck Capacity25 Ltr. Housing dimensions Dia. 400x600 mm InletDN25 OutletDN37 With sieve0,4 mm With mechanical sealcheck With jacketcheck Motor37 kW, 380 volt With variable speed drive500-1000 rpm With jacketcheck Sand mills Motor37 kW, 380 volt, 500-1000 rpm Specified Features - Sand mill MaterialHeat-resistant stainless steel 1.4767 General LocationBarneveld With switchcheck Floorspace1,90 x 1,00 m Total height1,85 m Weight2000 kg ATEX designedcheck Technical specs Extra informationwith cooled rotor.Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsSand millsFood additivesSugarConfectionery ...

General SKU383U1043 MakeNetzsch LocationBarneveld CEcheck TypeMastermill 3 Main Features MaterialStainless steel Volume10 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmillBasket Mill Capacity9 Ltr. Housing dimensions Dia. 220x250 mm InletDia. 220 mm With sievecheck With jacketcheck Motor2,2 kW With variable speed drivefrequency converter Rotor speed1100-3000 rpm With ballscheck MaterialPlexiglass/acrylic glass, Stainless steel 1.4552 With jacketcheck General No.2404563 Year of construction2015 With switchgear(as is) Floorspace1,2x0,9 m Total height1,2 m Weight630 kg ATEX designedcheck Extra SpecificationsDrive power mill, 2,2 kW, drive power stirrer 0,75 kW, mill speed 1100-3000 rpm, mixer speed 180-2600 rpm, basket volume 0,5 ltr,&:nbsp:Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsSand millsFood additivesSugarConfect ...

General SKU312T743 LocationBarneveld MakeBühler TypeFKK-900-A Main Features MaterialStainless steel Volume20 Ltr. Motor90 KW Specified Features - Sand mill Horizontal sand millcheck Capacity20 Ltr. Inletdia. 37 mm Outletdia. 37 mm Motor90 kW MaterialStainless steel General No.10 376 559 Year of construction2004 With switchcheck With switchgear(as is) Floorspace2,3x2 m Total height2,6 m Weight4100 kg (control cabinet 350 kg, pallet with loose parts 200 kg) Extra SpecificationsCooling water usage at 3 bar: 4.5 m³/hControl air pressure: 6–10barProduct flow rate: 60–1200 Ltr./hGrinding media Ø: 1,6-2,5 mm (steel process chamber)Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsSand millsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries ...

General SKUR1274 MakeFb Lehmann LocationBarneveld CEcheck TypeFM-20 Main Features MaterialStainless steel Volume18.3 Ltr. Motor18.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity18.3 Ltr Housing dimensions dia. 265x450 mm Inletdia. 25mm OutletDN40 With mechanical seal(Feodor Burgman) With jacketcheck Motor18,5 kW 415 Volt MaterialStainless steel With jacketcheck General No.204 503 Year of construction1992 With switchgearcheck Floorspace2,1x0,7 M Total height1,7 M Weight900 Kg Technical specs Extra informationBarrel inside is SS430 (Stainless steel with magnetic properties)Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsSand millsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicFb LehmannIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fill ...

General SKU409X1224 LocationBarneveld CEcheck MakeNetzsch TypeZeta RS2 Main Features MaterialStainless steel Volume2 Ltr. Motor15 KW Specified Features - Sand mill Horizontal sand millcheck Capacity2 l Housing dimensions dia 150 x 200 mm InletDN15 OutletDN15 With mechanical sealcheck With jacketcheck Motor15 kW, 400 volt, (Ex) With variable speed drivecheck Rotor speed500-2250 rpm With pumpcheck Motor0,55 kW, (Ex), With variable speed drive26-447 l/h, MaterialCeramic, Stainless steel 1.4301 (304) With jacketcheck General No.2800799-10 Year of construction2018 Mounted on frameon legs With switchgearcheck Floorspace1,620 x 0,995 m Total height1,760 m Weight1100 kg Extra SpecificationsWith blocking fluid vessel, flow meter, control/power cabinet, touchscreen control.Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsSand millsFood additive ...

General SKU409X1227 LocationBarneveld CEcheck MakeNetzsch TypeZeta RS2 Main Features MaterialStainless steel Volume2 Ltr. Motor15 KW Specified Features - Sand mill Horizontal sand millcheck Capacity2 l Housing dimensions dia 150 x 200 mm InletDN15 OutletDN15 With mechanical sealcheck With jacketcheck MotorV With variable speed drivecheck Rotor speed500-2250 rpm With pumpcheck Motor0,55 kW, (Ex), With variable speed drive26-447 l/h, MaterialCeramic, Stainless steel 1.4301 (304) With jacketcheck General No.2800170-10 Year of construction2016 Mounted on frameon legs With switchgearcheck Floorspace1,620x0,995 m Total height1,760 m Weight1100 kg Extra SpecificationsWith pump, 0,55 kW, (Ex), 26-447 l/h, blocking fluid vessel, flow meter, control/ power cabinet, touchscreen control.Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsSand millsF ...

A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.

General SKU363S879 MakeBühler AG (CH) TypeCobra 251 No.7576 Year of constructionunknown, manufacturer plate is missing LocationBarneveld Main Features MaterialMild steel Motor32 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 250 x 600 mm Inletdia. 25 mm Outletdia. 25 mm With jacketcheck Motor32 kW 220/380 Volt Without ballscheck MaterialMild steel With jacketcheck General Floorspace1,7x0,9m Total height1,8m Weight1350 Kg Extra SpecificationsWith additional grinding chambers (2x), motor (1x), various inserts and parts.Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsSand millsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industr ...

General SKU082Z322 LocationBarneveld MakeWerner &: Pfleiderer, Stuttgart TypeUK-14 X/AU No.154 576 Pressure Working pressure6 Bar Main Features MaterialMild steel Volume200 Ltr. Motor17.5 KW Specified Features - Z-blade mixer Jacketcheck Max. temperature220 Degr. C. Screw speed20/40 Rpm Arm speed27/20 Rpm (front/back) Capacity250 Ltr, Useful 200 Ltr Double shaft kneader:Mixtruder: (1x) Masticator-armscheck Trough sizes740x685mm With covercheck With screw dischargecheck Motor30,0 KW, 380 Volt Motor11,0/17,5 KW, 380 Volt Z-blade mixers MaterialMild steel General Year of constructionunknown With switchgear(as is) Floorspacekneader 2,8x1,4 M Total height1,6 M Weight3200 KG Extra Specifications- Dimensions drive unit 1,4x1,0x1,7 M (LxWxH), weight 2130 KG Technical specs Extra informationtest pressure is achieved at 220 Degr. C.Paints & coatingsOintmentsStar ...

General SKU360U980 MakeApplikon LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume750 Ltr. Motor0.25 KW Specified Features - Bioreactor Reactorcheck Capacity750Ltr. (bruto 940Ltr) Vessel sizesDia: 1134x1094 Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck Outletcheck With jacket69Ltr. Max. temperature140°C With propellor stirrercheck Motor0,25kW, 220-240/390-414Volt, 1300/94rpm Speed mixing shaft94rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.0298 7682B Year of construction1998 Mounted on legscheck With switchcheck With switchgear(as is)Paints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalAgrochemicalsRubberPlastic & polymersCatalysts & fillersBioreactors ...

General SKU360U951 MakeApplikon LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume750 Ltr. Motor0.25 KW Specified Features - Bioreactor Reactorcheck Capacity750Ltr. (bruto 940Ltr) Vessel sizesDia: 1134x1094 Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck Outletcheck With jacket69Ltr. Max. temperature140°C With propellor stirrercheck Motor0,25kW, 220-240/390-414Volt, 1300/94rpm Speed mixing shaft94rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.0290 7682A Year of construction1998 Mounted on legscheck With switchcheck With switchgear(as is)Paints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalAgrochemicalsRubberBiotechnologyPlastic & polymersCatalysts & fille ...

General SKU186K643 MakeWerner und Pfleiderer TypeLDUK 6 - IInS No.111045 Year of construction1962 Mounted on framecheck Pressure Working pressure10 Bar Main Features MaterialMild steel Volume18 Ltr. Motor7.5 KW Specified Features - Z-blade mixer Double screw cont. kneadercheck Jacketcheck With variable speed drivecheck Inlet30 x 195 mm Arm speed21,6-97,2/28,2-127 Rpm Arms can be cooled/heatedcheck Capacity18 l (usefull 8 l) Double shaft kneadercheck dispersion kneader Masticator-armscheck Single gearedcheck With adjustable packing glandscheck With covercheck With hydraulic tiltingcheck Motor7,5 kW (400 V) Z-blade mixers MaterialMild steel Information LocationBarneveld With switchcheck Floorspace1,8 x 1,4 m Total height2 m Weight2500 kg Extra SpecificationsPneumatic tilting. With top ram (pneumatic) Paints & coatingsFine chemicalsOther chemicalRubberPl ...

General SKU345S764 MakeHinke Tankbau GmbH (DE) No.8294 Year of construction2000 LocationBarneveld Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume9640 Ltr. Motor32 KW Specified Features - Bioreactor Reactorcheck Capacity8000 Ltr. (9640 Ltr.) Vessel sizesdia.2000x2500mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN200, DN150, DN100, DN80, DN50 OutletDN80 With jacket340 Ltr. Max. temperature-25/200 °C With paddle stirrer(Stelzer SDR 45-12 S) Motor2,6-32 kW 40-400 Volt Speed mixing shaft101 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4571 (316Ti)Paints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalAgrochemicalsRubberPlastic & polymersCatalysts & fillersBioreactorsSolventsDetergent & surf.Other ph ...

Length: 5000 mm Width: 100 mm Height: 2800 mm Year: 2011 0 Range+Heine coating system for coating individual wooden window components and frames for sale on behalf of a client ----------------------------------------------------------- Manufacturer’s technical description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Intended use of material from the relevant coating manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift (without forced drying) Process (1 cycle is run twice): - Flooding - Drying - Checking and applying joint sealant - Spraying - Drying -------------- -------------------------- Item 1 Conveyor technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially comprising: 3 drives with gear motors for the main  ...

General SKULT004 MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs LocationBarneveld CEcheck TypeMain Fraction Tank Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume15 Ltr. Motor0.12 KW Specified Features - Bioreactor Reactorcheck Capacity15,0 Ltr (20,5 Ltr ) Vessel sizesdia,250 x315mm Outlet3/4: With jacket(4,5 Ltr, 0,19m2) Max. temperature-10/95°C. With propellor stirrer:Magnetic ZETA, Type BMRT 50 W EX S Dk: Motor0.12 kW, 230-400 Volt, (Ex) Speed mixing shaft125-860 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.12462 Year of construction2021 Mounted on legs:mobile skid: With switchcheck With switchgear(as is) Total height+/- 1,5 m Weight385 kg ATEX designedcheck Extra Specifications- The tank is equippe ...

General SKULT003 MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs LocationGermany CEcheck TypeBreak / Side Fraction Tank Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume6 Ltr. Motor0.12 KW Specified Features - Bioreactor Reactorcheck Capacity6,0 Ltr (7,5 Ltr) Vessel sizesdia.250 x402mm Outlet3/4: With jacket(2.5 Ltr, 0.11m2) Max. temperature-10/95°C. With propellor stirrer:Magnetic ZETA, Type BMRT 50 W EX S Dk: Motor0.12 kW, 230-400 Volt, (Ex) Speed mixing shaft125-860 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.12450 Year of construction2021 Mounted on legs:mobile skid: With switchcheck With switchgear(as is) Total height+/- 1,5 m Weight360 kg ATEX designedcheck Extra Specifications- The tank is equip ...