pad printing machine used for sale

A textile screen printing machine Hebbecker including intermediate dryer and drying tunnel for the complete process is available. 1) Textile carousel screen printing machine Hebbecker S-Line-5-8-4040, year of manufacture: 2017, printing units: 5, stations: 8, max. print dimensions X/Y: 400mm/400mm, plate adjustment: +/-80mm, squeegee length: 410mm, machine diameter: approx. 2900mm, machine height: approx. 1900mm. 2) Infrared conveyor dryer M&R Economax D, year of manufacture: 2017, belt width: 610mm, heating chamber length: 1140mm, cooling system: CoolSkin. 3) Intermediate dryer Hebbecker Magic 25, year of manufacture: 2017. Documentation available. An on-site inspection is possible.

Manufacturer: Objet Model: Eden250 Type: 3D Printing System Power Rating: 100-120 V / 50-60 Hz / 12 A Power Rating Alternative: 200-240 V / 50-60 Hz / 6 A Phase: Single phase Ampere Rating Z Tray: 6 A Short Circuit Interrupting Rating: 30 A Certification: CE / FCC Conditon : Need to be cleaned and restored. Find more here - .ucymachines/ Contact us at - sales@ucymachines

A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible.

Manufacturer: MYCRONIC Model: My600 JP Year of Manufacture: 2024 The MY600 represents the top of jet-printing technology, enabling precise and fast solder-paste deposition for demanding electronics manufacturing. The machine is ideal for modern production lines with high quality requirements. Holder Units Not included Ejector Not included Auto Repair YES Glue option/SMT adhesive Can be upgraded (ejector variant) High speed Can be upgraded Shared databases Yes Board indexing Can be upgraded Fine pitch Can be upgraded Software: Latest version, which can be installed during setup FLE or Jpcam FLE can be provided My Center Can be provided Find more here - .ucymachines/ Contact us at - sales@ucymachines

Digital printer Type: iGEN 150 SmartPress Manufacturer: Xerox Year: 2015 10.3 million sheets were printed in the 350x600mm format Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

2 x perforation inserts 24" for Muller Martini model Grapha. In very good condition with quick change system. Available immediately.

Printing plate development machine Kodak (G+J) T-HDX 165; cleaned and tested; Working width 1650mm; 2 brushes; suitable for negative and positive printing plates; Chiller. Plate processor Kodak (G+J) T-HDX 165; cleaned and checked; working width 1650mm; two brushes; used for negative and positive plates; Chiller.

Two Gallus rotary screen printing units for the Arsoma EM 280 with peripheral equipment are available. Printing process: rotary screen printing, roller width, max. screen printing width: 270mm, side register adjustment range: +/-5mm, max. speed: 150m/min. Including various screen rings, welding unit, bonding fixture, mounting plate and trolley. Documentation available. An on-site inspection is possible.

This is a swissQprint Nyala LED, which is a high-end, industrial-grade UV flatbed/hybrid digital printer manufactured in Switzerland. The unit was reburbished by swissQprint and installed in 2024 . Find more here - .ucymachines/ Contact us at - sales@ucymachines

Production number: K1081568 Operating voltage: 3 x 400 V Nominal current: 181 A Frequency: 50 Hz Connection: 90 kW incl. rolling devices 5 devices with working length: 4400 mm also powder coating systems from the manufacturer RAPP incl. light barriers Auction-ID: A7-49089-415

Year of construction unknown suitable for Heidelberg SM 102 Printing unit protection operating side SM 102 curved design Drupa 2008 Delivery date: immediately from stock

Format lamination line / lamination line / laminating machine Make Fetzel Type SOVA1 Total power 8 KW Compressed air 6 bar / 250 l/min. Lamination width up to 400 mm Total length 4000 mm, total width 1100 mm, total height 1800 mm With 3 winding/unwinding rollers at the start, heated laminating roller at the top and bottom, laminate winding and protective paper unwinding at the end. Various measuring rollers and deflection rollers. With documentation.

Machine number: 18,307 Operating voltage: 400 V Frequency: 50 Hz Nominal current: 245 A Cooling water pressure: min. 3 bar/max. 8 bar Cooling water volume: 70 l/min incl. gripping system and powder coating from the manufacturer RAPP Control: SIEMENS Auction-ID: A7-49089-242

DCM HAC 1400/5 Flexographic 5 Colour Printing Press Comprising ENR web feed (1994) DCM web cutting (1994) AFS Corona AVE-150D surface treatment system (2021) Auction-ID: A1-48805-112

Max. roll weight: 800 kg Paper weight: approx. 40–300 g/m², depending on Auction-ID: A1-49964-27

Year of manufacture: 2018 Colors: CMYK Printing Simplex or Duplex Resolution up to 1,200 × 600 dpi Speed: up to 100 m/min uncoated Coated speed: up to 76 m/min Print width: up to 474 mm Paper web: approx. 330–510 mm Paper weight: 60-250 g/m², depending on material/test Maximum. Duty cycle up to 30 million A4/LTR pages/month Ink: water-based high-fusion pigment ink Serial number: 2173831-1179274 Module 2: Dimensions: L 335cm x W 120cm x H 230cm Included: Refrigeration unit type. MA0730-23880 Serial number: 2018 4 x control unit ELC Trivor 2400 Auction-ID: A1-49964-6

Year of Make: 2017 Colors: CMYK Printing Simplex or Duplex Resolution up to 1,200 × 600 dpi Speed: up to 100 m/min uncoated Coated speed: up to 76 m/min Print width: up to 474 mm Paper web approx. 330–510 mm Paper weight: 60-250 g/m², depending on material/test Maximum. Duty cycle up to 30 million A4/LTR pages/month Ink: water-based high-fusion pigment ink Module 2: Dimensions: L 335cm x W 120cm x H 230cm, Serial number: 2018 4 x control unit ELC Trivor 2400 1 x aStream control cabinet Auction-ID: A1-49964-12

With display: 7\" TFT, 800 × 480 pixels Operation: Touch screen + 8 function keys Interface: PROFINET/Ethernet Auction-ID: A1-49964-57

2020approx. 5,536 hoursapprox. 250 hours (heads replaced a few months before machine was taken out of production)

Digitaldrucker mit FS-612 Broschürenfinisher / Digital Printing Press with Broschure Finishing System Digitaldrucker / Digital Printing Press Konica Minolta Bizhub PRO C1060L Baujahr / Year 2016 - SN. A5VM021003546 Total Counter 137.408 Sheets, Duplex 33.008 Auflösung / Resolution 1.200 x 1.200 dpi x 8 bit Papiergrammatur / Paper grammage 62–300 g/m² Autom. Schön- und Widerdruck / automatic Perfection 62–300 g/m² Papierformate / Paper Sizes 330 x 487mm Maximaler Druckbereich / max. Print Area 323 x 480mm Papiereingabekapazität / Paper Infeed Capacity Standard 1.500 Bögen -  max. 4.250 Bögen Papierausgabekapazität /  Paper Infeed Capacity Broschürenfinisher FS-612 max. 2.500 Bögen Heftfinisher FS-531 max. 3.000Bögen Ausgabefach OT-502: max. 15 Bögen Abmessungen des Basissystems 760 x 903 x 1.072mm Gewicht des Basissystems 291kg

Complete metal sheet printing line with in line coater Double color printing units - Mailander 162 In line coater Mailander 460 30m tunnel GAS oven Sheet size: 45x38 inches Capacity: 5000 sheets per hour

GAS Tunnel oven 17 meters with 1 burner. Constructed in 1989.

CODIMAG VIVA 340 mm Waterless Year 2001 max. width: 330mm 5 offset units waterless 1 hot foilstamping unit 1 varnishing unit 6 IST UV dryers Kocher &, Beck GapMaster Rewinder/ Unwinder Waste rewinder Inline slitter Corona pretreatment BST Web inspection

CNC SCREEN PRINTING MACHINE Balsfulland CNC 1500 H Manufacturer: Werner Kamann Model: CNC 1500 H Year of manufacture: 2008 Design: Fully enclosed safety cabinet with protective glazing Machine type: Multi-color CNC screen printing system CE certified: Yes Details: CNC-controlled axes Multi-color printing stations Automatic product transport system Fully enclosed safety housing Integrated drying / curing unit Designed for industrial serial production Heavy-duty steel / aluminum frame construction Application: Cosmetic containers Brochure stand Glass bottles Plastic packaging Cylindrical or slightly tapered products Industrial packaging components

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...