pad printing machine used for sale

Number of color 12 Width 1850 mm

A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.

Buser Rotary Printing Machine (Switzerland) Model: CH-3428 Type: R5B E 1850/24L Year: 1997 Printing: Blades Blanket newly installed Conveyor in Good condition Colours: 24 Open Bearing with Repeats: 640, 720, 820, 914, 1018 Repeat Gears: all Repeats 12 sets available Sequgee: Different Sizes (1 Lot) Entry with Dust Suction Slot High Efficiency 3 pass Two Dryer Chambers with Gas Heated Sequgee Washer 01 Set Screen Washer 01 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Reference Num.: 4099 Brand: Heidelberg Type: KS Cylinder 38x52 Construction year: 1960 Size: 38 x 52 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 38 x 52 mm Total weight: kg 3,500 / lbs 7,716

We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...

Reference Num.: 4246 Brand: Heidelberg Type: SM 52-2-P Construction year: 1999 Impressions: 98 mio Size: 370 x 520 mm Available: directly Status: Not in production Location: Europa Sheet size: min 105 x 145 mm, max 370 x 520 mm Printing speed: max 15,000 sheets/hour Printing units: 2 Paper thickness: 21.06 mm Machine size: Length: 2,860 mm, Width: 1,850 mm, Height: 1,620 mm Total weight: kg 4,800 / lbs 10,582 Equipment: - Alcolor - Wendung 2:0 / 1:1 - Nummerier- & Perforiereinrichtung - Autoplate - automatische Wascheinrichtung

Printing units outside/inside: 3/1, doctor blade units: available, envelope size range: booklet min./max.: 100mm/150mm–180mm/254mm, pocket min./max.: 89mm/120mm–187mm/305mm. Documentation available. An on-site inspection is possible.

Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible.

A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.

Reference Num.: 4211 Brand: Heidelberg Type: GTOZP 52+ Construction year: 1987 Impressions: 32 mio Size: 360 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 360 x 520 mm Printing speed: max 8,000 sheets/hour Printing units: 2 Machine size: Length: 2,190 mm, Width: 1,450 mm, Height: 1,550 mm Total weight: kg 2,850 / lbs 6,283 Power: KW 4 / hp 6 Equipment: - Nummerier- & Perforiereinrichtung - Wendung 2:0 / 1:1 - VARN Kompac III - Puderapparat - Doppelbogenkontrolle

Reference Num.: 4283 Brand: Ryobi Type: 525 GXP Construction year: 2008 Impressions: 64 mio Available: directly Status: In production Location: Deutschland Printing units: 5 Equipment: - Ryobi PCS-H - Wendung 2:3 / 5:0 - RYOBI halbautomatischer Plattenwechsler - IR Trockner - Puderapparat Grafix Digital 3000 - Elektronische Seitenmarkenkontrolle - elektronische Doppelbogenkontrolle - Ultraschall-Doppelbogenkontrolle - Hochstapel Ausleger - Schuppenanleger - automatische Gummituchwascheinrichtung

Reference Num.: 4242 Brand: Xerox Type: Nuvera 120 EA Impressions: 10 mio Available: directly Status: Not in production Location: Deutschland

Printing inserts for Muller Martini Grapha 16". For more info please inquire.

Reference Num.: 4295 Brand: MAN Roland Type: RZF 0B Construction year: 1979 Impressions: 33 mio Size: 520 x 720 mm Available: directly Status: In production Location: Deutschland Sheet size: min 210 x 580 mm, max 520 x 720 mm Printing speed: max 10,000 sheets/hour Printing units: 2 Machine size: Length: 5,038 mm, Width: 2,520 mm, Height: 1,965 mm Total weight: kg 8,600 / lbs 18,960 Power: KW 15 / hp 15

Reference Num.: 4294 Brand: MAN Roland Type: RZF 0B Construction year: 1975 Size: 520 x 720 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 210 x 580 mm, max 520 x 720 mm Printing speed: max 10,000 sheets/hour Printing units: 2 Machine size: Length: 5,038 mm, Width: 2,520 mm, Height: 1,965 mm Total weight: kg 8,600 / lbs 18,960 Power: KW 15 / hp 15 Equipment: - Trockner

Number Of Colours: 9 // Maximum Diameter: 175 mm

Number Of Colours: 7 // Rim Diameter (Max): 160 mm

Printing Width: 1250 mm // Web Width: 1300 mm

Number Of Colours: 8 // Printing Width: 820 mm

Number Of Colours: 8 // Printing Width: 406,4 mm

Number Of Colours: 8 // Printing Width: 430 mm

Printing Width: 1050 mm // Web Width: 1120 mm

1 DGEN digital textile printing machine type ARTRIX H8 model 740TX/V H8BR, with DGEN standalone dryer type DR-180H3, year 2020, maximal printing width 1820 mm 8 colors, 1280 nozzles on each color, sticky belt fabric feeding system

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler

Reference Num.: 4318 Brand: Xerox Type: DC 700 Construction year: 2013 Impressions: 4 mio Available: directly Status: In production Location: Deutschland Equipment: - Duplexdruck - Scanner - Broschürenfinisher - Fiery

Reference Num.: 4348 Brand: MAN Roland Type: PR 01 Construction year: 1990 Impressions: 9 mio Size: 480 x 660 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 210 x 280 mm, max 480 x 660 mm Printing speed: max 10,000 sheets/hour Printing units: 1 Machine size: Length: 1,720 mm, Width: 1,450 mm, Height: 1,605 mm Total weight: kg 2,190 / lbs 4,828 Power: KW 7 / hp 7

Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and  ...

Reference Num.: 4266 Brand: Ricoh Type: Pro C7200SX Construction year: 2015 Impressions: 5 mio Available: directly Status: In production Location: Deutschland

Reference Num.: 4168 Brand: Xerox Type: D136 Construction year: 2014 Impressions: 11 mio Available: directly Status: In production Location: Deutschland Equipment: - Doppelbogenkontrolle - Duplexdruck

Reference Num.: 4304 Brand: Heidelberg Type: QM 46-2 Construction year: 1996 Impressions: 25 mio Size: 340 x 460 mm Available: directly Status: In production Location: Deutschland Sheet size: min 89 x 140 mm, max 340 x 460 mm Printing speed: max 10,000 sheets/hour Printing units: 2 Machine size: Length: 1,500 mm, Width: 1,270 mm, Height: 1,530 mm Total weight: kg 890 / lbs 1,962 Power: KW 3 / hp 3

Reference Num.: 4402 Brand: Polly Type: 266 APH Construction year: 1998 Available: directly Status: In production Location: Deutschland Printing units: 2 Equipment: - VARN Kompac III - Registerfernverstellung - IR-Trockner - Puderapparat - Hochstapel Ausleger - verlängerte Auslage - Wendung 2:0 / 1:1 - Schuppenanleger

Offset rotary printing machine Type: Lithoman IV Manufacturer: MAN Roland Year: 1999 Impressions: 42500 Cylinder circumference: 1240 mm Maximum paper width: 965 mm Maximum operating speed: 42,500 cylinder revolutions/hour Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Letterpress Type: HK 250 Manufacturer: Hikari Unwind x 6 UV leterpres print unit, Ist UV dryer Punch air unir Flat diecut unir Slittinfg unit x2 rewind unir (revolver) Label counter Machine in good condition, fully funcrional Find more here - .ucymachines/ Contact us at - sales@ucymachines

Reference Num.: 4233 Brand: Heidelberg Type: GTO 52-4-P3 Construction year: 2003 Impressions: 40 mio Available: directly Status: In production Location: Deutschland Printing units: 4 Equipment: - Plus-Version: vorbereitet für Nummerier- & Perforiereinrichtung - Wendung 2:2 - Classic Center - Puderapparat - elektronische Doppelbogenkontrolle - Neue Walzen - VARN Kompac III

Reference Num.: 4430 Brand: Ryobi Type: 524HE Construction year: 2004 Impressions: 60 mio Available: directly Status: Not in production Location: Europa Printing units: 4 Equipment: - RYOBI Semi RPC - RYOBI-matic - automatische Wascheinrichtung - Kühlgerät Technotrans alpha.d - Maschine OHNE Wendung - Farbfernsteuerung - Plattenstanze - Puderapparat

A manual screen printing machine Eickmeyer is available. Material thickness range: 2mm-25mm, max. printing dimensions X/Y: 1700mm/700mm, machine dimensions X/Y/Z: approx. 2650mm/2100mm/1500mm. An on-site inspection is possible.

Pad printing machine, screen printing machine, rotary printing machine, pad printer -Manufacturer: Eickmeyer, screen printing machine, pad printing machine -Type: TIC 121 SC -Voltage: 230 V -Table size: 180 x 100 mm -Protrusion: 165 mm -Operation: with foot pedal -Number: 2x pad printing machines available -Price: per piece -Transport dimensions: 670/400/H530 mm -Weight: 50 kg/piece

Tube film width: 60-215mm, film thickness: 0.06-0.12mm, max. tube film roll diameter: 300mm, film core diameter: 76mm, bag length: 60-600mm, output at bag length 100mm and film thickness 0.06mm: 15 pcs/min, print image dimensions: 300x213mm, print length: max. 300mm, optional print length: up to 600mm, table dimensions: 880x460/600mm, table height: 850mm, connected load: 2.3kW, fuse protection: 10A, supply pressure: 6bar, rel. humidity: 25%-85%, noise emission: 75dB(A), length: 1200mm, width: 1200mm, height: 1550mm, weight: 250kg, with documentation. An on-site inspection is possible.

A compact screen printing machine Thieme is available. Print dimensions X/Y: 750mm/1050mm, max. screen frame dimensions X/Y: 1200mm/1400mm, max. print material height: 40mm, squeegee speed: 75m/min, printing speed: 950cycles/h, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1350mm, weight: approx. 700kg. An on-site inspection is possible.

Four identical screen printing machines ESC are available. Rigid material thickness: 200mm, max. print format X/Y: 400mm/600mm, vacuum plate dimensions X/Y: 500mm/700mm, vacuum area dimensions X/Y: 405mm/600mm, max. frame dimensions X/Y: 600mm/940mm, frame profile range: 25mm-47mm, max. print material thickness: 200mm, working height: 960mm, frame lift: 270mm, printing speed range: 125mm-750mm/s, max. cycle rate: 600p/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, working pressure range: 5bar-7bar. Machine dimensions X/Y/Z: approx. 1300mm/1100mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.

A digital roll label color printing machine Xeikon including a Hunkeler unwinding module is available. Resolution X/Y: 1200/3600dpi, max. print width: 322mm, material width range: 200mm-330mm, max. repeat length: 55m, max. printing output: 380m²/h, material weight range: 40g-350g/m². Unwinding unit Hunkeler UW6-C 7199, year of manufacture: 2011, max. roll diameter: 1370mm, web width: 520mm, web speed: 220m/min, max. roll weight: 600kg. Documentation available. An on-site inspection is possible.

A total of five identical ESC screen printing machines with different years of manufacture are available. Vacuum dimensions X/Y: 405mm/600mm, max. print dimensions X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. frame dimensions X/Y: 700mm/800mm, frame profile range: 25mm-54mm, max. substrate thickness: 300mm, max. cycle output: 800p/h, machine dimensions X/Y/Z: approx. 1250mm/950mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 193.231 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 132.756 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

POLYBAG PRINTING MACHINE VJ1530 STD 70m, IP55, Positive Air Pump,3m PLEASE CONTACT FATIMAH (+60136287197) MALAYSIA NUMBER LOCATED AT F25

Reference Num.: 4435 Brand: Heidelberg Type: CYLINDER OHZ - 54 x 72 cm Construction year: 1959 Size: 540 x 720 mm Available: directly Status: In production Location: Deutschland Sheet size: max 540 x 720 mm Printing units: 1

- 5 Printing units (letterpress) with magnetic cylinders, - 1 Flexo-Varnishing-Unit, - 6 UV drying (air-cooled), - Rotary die-cutting unit with a magnetic cylinder, - GAP Master, - BST POWER SCOPE 3000 Pro Mark Edition - Video system for print image inspection, The scope of delivery also includes a rear-side rotary die-cutting unit;, this can be fitted in place of the flexo varnishing unit., Web width max.: 340 mm, Web width min.: 120 mm, Track width max.: 340 mm, Maximum track width: 340 mm, Bag width min.: 120 mm

Reference Num.: 4436 Brand: Ricoh Type: Pro C7100 S Construction year: 2017 Impressions: 3 mio Available: directly Status: In production Location: Deutschland Equipment: - Fiery Color Controller E-43-A - Vacuum Feed LCIT RT5100 - Finisher SR5050 - Buffer Pass Unit Type S3 - Scanner - Monitor - Touchscreen