packaging machine used for sale

Clever titulator with steam tunnel. 2 pieces available Year of construction 2004 and 2005 Type: GS 501 Capacity: 11,000 fl./h > 18,000 fl./h

We sell new bagel machines

Pausch X-ray imaging workstation Compact CS 3000 with the following system components Generator Genesis DT_Baujahr 2017 Tube RAD 14 0,6/1,2 Fa. Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by t ...

SHIKI Model PC 30, year of construction 1980, 1x letterpress (2 colors); lamination unit; punching unit; Longitudinal section, 2 hot foil plates, in good condition, immediately available

This 3-axis KAOMING KMC-2000 SV gantry milling machine was manufactured in 2008. It features a generous X-axis travel of 2,230 mm, Y-axis travel of 1,700 mm, and Z-axis travel of 850 mm. The machine includes a substantial table size of 2,000 x 1,650 mm and a maximum table load of 6,000 kg. If you are looking to get high-quality milling capabilities, consider the KAOMING KMC-2000 SV machine we have for sale. Contact us for further details.

Centerless grinding machine manufactured in 2004. This HERMINGHAUSEN SR 2 W features a grinding wheel circumferential speed of 35 m/sec and is equipped with a Lenord+Bauer control panel with a digital display. It includes a coolant and filtration tank system, along with a part feed chute/guide. If you are looking to get high-quality grinding capabilities, consider the HERMINGHAUSEN SR 2 W machine we have for sale. Contact us for further details.

Deburring machine manufactured in 2006. This Costa M36 CCS 1150 features a working width of 1150 mm, making it suitable for various deburring applications. If you are looking to get high-quality deburring capabilities, consider the Costa M36 CCS 1150 machine we have for sale. Contact us for further details.

Evaporator Güntner, air cooler with two fans 500mm, 8 mm fins and defrost heater The atomizers are for TK as well as for Plus Grade Refrigerant Freon, all types. Outputs from 15 to 22kW at minus 25°C evaporation, or 25 to 38kW at minus 10°C evaporation. Liter capacity 33.9 liters, 27 liters, 20.7 liters, all with two fans Price on request.

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...

bore capacity in steel (diameter): 20 mm throat: 195 mm bore stroke: 80 mm boring spindle: MK 2 table surface area: 320 x 300 mm total power requirement: 0,75 kW weight of the machine ca.: 0,072 t dimensions of the machine ca.: 0,7 x 0,4 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

- engine power: 1.1 kW - dial diameter: 300 mm - cut from below - cutting at an angle of -45 °, 90 °, + 45 °, intermediate angles set manually - vertical pneumatic pressure - protective cover - cooling installation

Type: Univer FC 100 Power: 1.2 kW Power supply: 380 Volt Current consumption: 3 A Weight ca: 125 kg Directly from the customer used from November from CH-Pratteln available.

This 3-axis WITTMANN W832PRO was manufactured in 2018. It features a generous X-axis travel of 900 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 3,000 mm, with a payload capacity of 24 kg. If you are looking to get high-quality plastic processing capabilities, consider the WITTMANN W832PRO machine we have for sale. Contact us for further details.

Vertical turning machine manufactured in 2009. This SMTCL QTC 20090 features a maximum turning diameter of 2,000 mm and a turning height of 1,600 mm. It includes a manual 4-jaw chuck with a diameter of 1,600 mm and a 12-position tool changer magazine. If you are looking to get high-quality turning capabilities, consider the SMTCL QTC 20090 machine we have for sale. Contact us for further details regarding this machine.

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

This 3-axis ROSA ERMANDO STEEL 11.7 CN was manufactured in 2000. It features an ECS 2401 control system, a grindable size of 1,000 x 750 mm, and a grinding height of 600 mm. The machine can handle a table load up to 1,400 Kg and offers a longitudinal speed of 1–38 m/min. Consider the opportunity to buy this ROSA ERMANDO STEEL 11.7 CN surface grinding machine. Contact us for more information about this machine.

CNC punching machine manufactured in 2004. This Euromac BX 1250/30 features advanced capabilities for precision punching tasks. If you are looking to get high-quality punching capabilities, consider the Euromac BX 1250/30 machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 2012. This TRUMPF TruPunch 3000 features a punching force of 18 tons and a maximum sheet thickness of 6.4 mm. The working area measures 3,000 x 1,500 mm, making it suitable for various applications. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details.

Fixed and live bushing - Iemca Smart 320/32 new in 2018 - very well equipped - chip conveyor - Mitsubishi M70 Control

for cutting bread

water cutter

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

This 3-axis AMADA LCG 3015 AJ fiber laser cutting machine was manufactured in 2016. It features a maximum continuous laser power of 2,000 Watts and an impressive X-axis travel of 3,070 mm. The machine includes an automatic palletizing system and a lightweight HS cutting head with advanced safety measures. If you are looking to get high-quality cutting capabilities, consider the AMADA LCG 3015 AJ machine we have for sale. Contact us for further details.

This 3-axis Sodick Picka PF-32A was manufactured in 2010. Its an electron-beam processing machine designed for high-precision surface treatments. Features include a vacuum chamber, a max workpiece size of 300 × 200 × 100 mm, and a beam diameter of up to 60 mm. Ideal for applications requiring fine finishing. Contact us for more information.

Wrapping machine for deposited or enrobed chocolate products with or without center-filling in double twist wrap. Speed of the machine - up to 400 pcs/min Product dimensions: - Length: 20 – 75 mm - Width: 13 – 29 mm - Height: 8 – 25 mm - Diameter at bottom: 13 – 25 mm With original feeding system. More details in the attached document

This 5-axis AccuteX AL-500SA wire EDM machine was manufactured in 2025. It features a maximum workpiece weight of 500 kg and an X-axis travel of 500 mm. The machine is equipped with a CNC control system based on Windows CE and includes automated lubrication for the X and Y axes. If you are looking to get high-quality wire EDM capabilities, consider the AccuteX AL-500SA machine we have for sale. Contact us for further details.

Thank you for your interest in our used machines, which we can offer you as follows: Probat L12 roaster in top condition - little used Manufacturer: Probat Model: L 12 batch roaster Year of construction: 1995 Heating medium: Gas Capacity: approx. 5 - 12 kg/batch Dimensions: 1700x1000x2000 mm Weight: approx. 580kg Details: - Batch size up to approx. 12 kg green coffee - The roaster is installed and can be viewed in operation - Last used to roast buckwheat or pumpkin seeds - Operating instructions available in German We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. from the location Germany; unpacked, without disassembly

1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.

Reference ID: PP-62429 Manufacturer: Bobst Model: SP 142 CE Year: 1995 Max. Size: 1420 x 1020 mm Condition: Good Location: Europe Availability: Immediately Manufacturer: BOBST Model: SP 142-CER Year of manufacture: 1995 Maximum sheet size: 1,420 × 1,020 mm Minimum sheet size: 700 × 500 mm Maximum rated speed: 8,000 sheets/hour Maximum cutting force: 5.5 MN (550 t) Recorded operating hours: 51,652 h Condition: Good and fully operational Inspection: Available with the machine running, by appointment   Equipment and configuration Automatic sheet-fed flatbed die-cutting system Die-cutting and creasing section Stripping section for removal of cutting waste Blanking section for separation of individual blanks Side-access tooling arrangement Pull-out tool/frame carrier Operator platforms with access stairs and guardrails Emergency-stop buttons at the machin ...

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working piece thickness (Radius) ca. 16 - 55 mm Working piece thickness (Chamfer) ca. 12 -55 mm Working piece width min. Ca. 30 mm Inner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours) Edge thickness max. ca. 3 mm Milling motor 2 x 0,4 kW, 10950 o/min. Dust extraction 1 x diam. 80 mm Working height 900 mm Radius 3 mm tooling

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Used spiral kneader DIOSNA, type: SP 160 D -In bakery condition- - up to 160 kg dough / approx. 100 kg flour - Condition: Good, ready for immediate use The kneader is in good used condition and is immediately ready for use. Visits and test runs are possible by arrangement.

Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.

Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991

Min/Max. workpiece length 1800 / 4200 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW

Semi-automatic

Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units

Pastec pasta machine used with pasta trays and corresponding tray trolley. The machine is equipped with 5 dies and cutters with 3 different blades. The base frame has extendable storage bars for the trays and is mobile. The lid is slightly damaged (see picture) and the potentiometer of the cutter would have to be changed, as it cannot be finely adjusted. Video of the test run available, can be sent via Whatsapp. It is a very heavy and powerful machine for professional use. In addition to the dies for spaghetti and tagliatelle as well as pasta sfoglia (dough sheets or wide dough sheet for lasagna), there is also a die for croissants or a special shape. The mixing shaft can be removed without tools and the stainless steel screw can be pulled out to the front. Machine must be thoroughly cleaned before use Video of the test run and more pictures available

Travel X-axis 600mm Y-axis 400mm Z-axis 300mm U-axis ±50mm V-axis ±50mm Max. workpiece dimensions 990 x 620 x 295mm Max. table load 550Kg Max. Konik ± 21º / 100 mm Machine weight 3700Kg Machine height 2210mm Machine dimensions 2480 x 2980mm Standard Wire Diameter 0.15 to 0.3mm Max. Weight of Wire Spool (kg) 10 kg (P10) Surface quality Ra 0.35 Capacity of the water system (l) 1000 Machinery equipment Transformer Windows CE Touch Screen Controller Auto Wire Threading (AWT) SD Master Tubular Linear Actuator Collision protection X/Y/Z/U/V axles 0.1 μm linear scale resolution PC Acrylic Filter Tank Cover Standard Remote Box Water Chiller Float Gun Safety door lock 3 Filters Water Tank Design CE Conformity Configuration Clean water tank

Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987

Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985

Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible.

Control: Heidenhain TNC 355, operating hours: 69,557h, with accessories. An on-site inspection is possible.

Electrical power: 7kW, operating voltage: 380V, frequency: 50Hz, control voltage: 220V, current: 35A, control: Heidenhain. An on-site inspection is possible.