pack to pack used for sale

Univ. Swivel, Tilt and Turn Table DECKELUniversal Tool Milling Machine Attachment Table suitable for FP 2L or FP 3L or FP 4LNr. 2314-0301 Year of construction: approx. 1975Clamping surface: 1000 x 520 mm- 6 clamping grooves 16 mm, distance 90 mm- Clamping plate can be rotated horizontally to the right and left up to 45 degrees- Tiltable from/to the machine +/- 15 degrees- Swivel +/- 15 degrees- Swivel table, tilting table, angle tablePermissible load max. 1000kgWeight: 400kggood condition; used

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Tool presettler SOMET type SPS 500 UMash. No. S1-020 Year of construction 1987Table surface 545 x 1000 mmTravel distances X = 500 mm, Y = 340 mmWidth in the portal 550 mmHeight table - lower edge portal 250 mm- Portal longitudinal guidance on the right and left of the table- Adjustment via very fine threaded spindles with handwheel- Quick adjustment via electric unlocking- Projector screen 150 mm with crosshairs and coordinates MEOPTA PMP100- 2 pieces of clamping devices for tool measurement- on substructure with shelf and drawerSpace requirement L

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. tool milling machine directly from one resolutionMilling machine DECKEL type FP 4Masch. No. 1/0687 Year of construction 1978Travel X: 700 mm, Y: 400 mm, Z: 450 mmTable clamping surface 860 x 500 mmSpindle holder SK 40 - M16Spindle speed 31.5 - 1600 rpm. 18 stepsQuill displacement horizontal and verticalMain spindle drive 4 kWNet connection 380 volts, 50 Hz- Digital display 3-axis HEIDENHAIN- Universal swivel-tilt turntable- Coolant device in the machine base- Machine vice- none

Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight

CNC Univ. Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4Machine - Defect - without ControlMachine not ready for operation - electric without function - without CNC controlFabr. No: 03-02 Year of manufacture 19904 axes (X, Y, Z and R)Table clamping surface 1300 x 250 mmCenter width 700 mmCenter height 155 mmGrinding length (X-axis) max. 400 mmGrinding width (Y-axis) max. 260 mmGrinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kWNet connection 380 Volt, 50 Hz, 25 Amp.- CNC control

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

12-piece die block for die bending machine GEWAAbending tool for press brake, lower toolType: 0255/14Prism size: 16 mm for 90Prism angle: 88Countersunk depth: approx. 8 mmOverall height: 120 mmmax. Printing capacity per meter: 100 t/mFoot width from the die: 60 mmTotal length: 4175 mmSegment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mmWeight: 110 kgvery good condition; used

Tow tractor for logistics train towing vehicles, tugger train for logistics trainsElectric tow tractor, electric tractor STILL type CX TZuglast: max. 4000 kgNominal drive power: 3 kWBatterie voltage: 24 volt hydraulic quick coupling (single-circuit hydraulic system, was used for lifting trailers)- towing bracket - plus an automatic battery charger - battery in poor conditionEmpty weight: 740 kgBattery weight: 382 kgTotal weight: 1120 kg3 pieces available:Tractor 1 = Year of construction 2011Tractor 2 = Year of manufacture: 2010Tractor: 3 =

Tool steel, round material, shaft sectionShaft, steel block, shaft sawnCold work tool steel 1.2842Material section 400 mm x length 165 mmNet weight: approx. 160 kgMaterial number: 1.2842Material abbreviation: 90MnCrV8Cold-work tool steel with high hardness acceptance and good dimensional stability during hardeningApplication in toolmaking for cutting, punching and embossing tools.Rollers and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HBug strength in delivery condition: 770

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 34338 Year of construction approx. 1965Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 200 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stagesMotor power 1.0 and 1.5 kW pole-switchableMains connection 380 volts, 50 Hz- 3-axis digital display HEIDENHAIN, type VRZ 753 B- Spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Universal face and boring head LENZ type LPA 1SSpindle tool, spindle head similar to WOHLHAUPTER UPA3Tool holder: SK 40 - M16Adjustment accuracy: 0.01 mm- Accessories as shown- Storage boxWeight: approx. 5 kggood condition; used

Electric towing vehicle, tow tractor for tugger train SILENT tow tractor STILL type R063-wheel tow tractor, electric tractorFabr. No. W4X126A00120 year of construction 2010Towing load: max. 6000 kgPayload 150 kgAxle load front: 420 kgAxle load rear: 600 kgDrive power: 3.2 kW /60 min. Battery voltage: 24 volts- 3-wheel tractor- without towbar, carrier plate with 14 mm holes, hole spacing 65 /75 x 120 mm- lighting device- 24 volt socket rear- battery from year of construction 2010, type 5 EPzS 625 (24 volt/ 625 Ah) - defective

Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4Masch. No. 341020 Year of construction 1998Travel distances X: 400 mm Y: 320 mm Z: 400 mmTable size 650 x 350 mmSpindle holder SK 40Spindle speed 40 - 2500 rpm. Feeds X, Y and Z axis 0 - 1000 mm/min. infinitely variableRapid traverse X, Y axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Quill adjustment vertical 60 mmDrive power Spindle motor 3 KWnet connection 400 volts, 50 Hz- CNC line control Heidenhain TNC 124- Spindle speed via 2 gear stages and

8 pieces - Tugger train Tow tractor STILL - Electric tow tractor STILL Type CX TLogistic train Towing vehicles, tugger train for logistics trains Year of construction all around 2010 or laterBatteries from 2010 to 2017Plus a chargerScope of delivery for the offer price:8 pieces Electric tow tractor STILL type CX Each tractor has a battery installed.1 piece chargerAll devices workA battery is defective, so a device does not work. Technical data:Tensile load: max. 4000 kgNominal drive power: 3 kWBatteria voltage: 24

Compressed air toggle press BURGER type D04Fabr. No. 4497 Year of construction approx. 1972Compressive force max. 6 ton. Projection 150 mmPlunger stroke 39 mmTable size 340 x 270 mmThrough-hole opening 46 mmInstallation height max. 160 mmTool holder 25 mmPlunger plate 90 mmPneumatic operating pressure 5 barMains connection 220 V 50 Hz- Pressure regulator for press force adjustment- Lifting height adjustment 7, 21, 40 mm- Electric foot switch- Table height adjustmentSpace requirement L x W x H 700 x 500 x 1300 mmWeight

Pneumatic toggle press, pneumatic press SCHMIDT type 34-12Fabr. No. 400160-03 Serial No. 0028 Year of manufacture 2008Compressive force 28 kN = 2.8 ton. Throat depth 130 mmPlunger area 63 x 36 mmPlunger stroke 12 mmPin hole 20 mm with clamping screwCompressed air requirement 2 to 6 bar- Stroke length infinitely variable via adjustable fixed stop for the upper end of stroke position- Fine adjustment for lower end of stroke position with scale 1 tick = 0.05 mm- Stroke triggered via pneumatic valve, triggered by material insertion- Press stand 45 off

Tool holder combination holder for internal and external cooling VDI 25 Ø 25 mm/ Ø32mm Manufacturer: EWS Country of origin: Germany Shaft size VDI25 Cantilever length (LPR) 95.00 mm Functional length (LF) 70.00 mm Functional width (WF) 30.00 mm Mounting diameter, min. (DCONN) 25.40 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Interface size Ø 1" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website: ews-tools.de/de-DE/product/ews-17-2525-4mft-kombih-f-innen-u-aussenkue hlung-bohrungs-25-4-mm-1-/66355 Condition: New

Tool holder combination holder for internal and external cooling VDI 40 Ø 25120/Ø4090/Ø3670 Cantilever length (LPR) 145.00 mm Function Length (LF) 120.00 mm Functional width (WF) 42.50 mm Pick-up diameter, min. (DCONN) 25.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI40 Interface size Ø 25.0 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system (block) Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-4025lctxdi-kombih-f-i nner-u-ausauskuehlung-bore-25-mm-long-ausfäehrung-differential-verste llung-differentialialverstellung-/103300 Pcs:7/74/4

Tool holder combination holder for internal and external cooling VDI 50 Ø 4085125 Cantilever length (LPR) 125.00 mm Functional length (LF) 85.00 mm Functional width (WF) 42.50 mm Mounting diameter, min. (DCONN) 40.00 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI50 Interface size Ø 40.0 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system (block) Price without VAT Pieces:4

Tool holder combination holder for internal and external cooling VDI 60 Ø 50200235 17.6050.8S670 Cantilever length (LPR) 235.00 mm Function Length (LF) 200.00 mm Functional width (WF) 62.50 mm Mounting diameter, min. (DCONN) 50.80 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI60 Interface size Ø 2" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-6050-8s670-kombih-f-i nnen-u-ausauskuehlung-durchmesser-50-8-mm-2-/68694 Pieces:4

Siemens Simatic 6AV7872-0BC12-1AC0 Touch Panel PC Touch 15" 677B Series P6 6AV7872-0BC12-1AC0 Touch 15" Panel PC 677B Verse. 03 More items - new and used - can be found in our shop! International shipping costs on request!

Tool holder VDI 30 longitudinal holder Interface size square 20x20 4.3020DSS left Cantilever length (LPR) 60.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 22.00 mm Clamping length, max. (LSCX) 60.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-4-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c2-links-/69246 Condition: New

Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Tool holder VDI 30 longitudinal holder Interface size square 20x20 2.3020DSS right overhead Cantilever length (LPR) 70.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 23.20 mm Clamping length, max. (LSCX) 70.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-2-3020dss-langengsaufnah me-stahlhoehe-20-din-69-880-form-c3-right-overhead-/69572 Condition: New

Tool holder VDI 30 longitudinal holder Interface size square 20x20 right 1.3020DSS Cantilever length (LPR) 75.00 mm Functional length (LF) 0.00 mm Operating Height (HF) 19.05 mm Functional width (WF) 60.00 mm Clamping length, max. (LSCX) 75.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-1-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c3-rechts-ueberkopf-/68760 Price without VAT

Boring rod holder with external cooling radial Ø 1675 / Ø1875 / Ø2575 / Ø3275 Cantilever Length (LPR) 168.00 mm Function Length (LF) 143.00 mm Functional width (WF) 60.00 mm Mounting diameter, min. (DCONN) 16/18/25/32 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI50 Interface size Ø 16/18/25/32 (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-17-5016x75-kombih-f-innen-u-auss enkuehlung-bohrungs-16-mm-x-75mm-/66136 Condition: New Pcs:3/3/7/1

Tool holder boring rod holder VDI 40 36×95/1676/2596/2895/2295 Manufacturer: EWS Type: VDI 40 Bar diameter: 36/16/25/28/22 Bet Height: 95/76/96/95 Price without VAT Country of origin: Germany Condition: new Pieces: 2/8/7/1/1

Tool holder combination holder for internal and external cooling right/left VDI 40 Ø 25 Cantilever length (LPR) 180.00 mm Functional Length (LF) 150.00 mm Functional width (WF) 10.00 mm Mounting diameter, min. (DCONN) 25.40 mm Product Categories Static Tools and Adapters Product Type: Cylindrical Holder Shaft size VDI40 Interface size Ø 1" (drill rod) Convertible yes - lid Rotatable main and sub-spindle No Tool orientation 90° Pin alignment system Price without VAT Link to the product on the manufacturer's website:ttps://ews-tools.de/de-DE/product/ews-17-4025-4mp620-kombih-f- innen-u-ausauskuehlung-bohrungs-25-4-mm-1-/22571 Pieces:5Right/5Left

Tool holder longitudinal holder VDI40 steel height 25 Links Functional length (LF) 0.00 mm Operating Height (HF) 25.40 mm Functional width (WF) 25.50 mm Clamping length, max. (LSCX) 85.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI40 Square Interface Size 1"x1" Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-3-4025-4dss-laengsaufnahme-stahl hoehe-25-4-1-/69384 Condition: New Pieces:12

Tool holder longitudinal holder VDI50 steel height 32 left Functional length (LF) 0.00 mm Functional height (HF) 32 mm Clamping length, max. (LSCX) 85.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI50 Square Interface Size 1"x1" Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Condition: New Pieces:5

Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.

weight: 100 kg : 2 Stück height: 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.