pack to pack used for sale

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 91/63/H51 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 15 mm -Dimensions: see photos -Dimensions: 130/65/H65 mm -Weight: 1.3 kg

length: 700 mm width: 700 mm height: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 1 1/4 -Hole: Ø 20 mm -Dimensions: see photos -Dimensions: Ø 72 x 90 mm -Weight: 1.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 16 mm -Dimensions: see photos -Dimensions: 300/97/H100 mm -Weight: 3.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Hilmor, aluminum tube bending tool for profile bending machine -Profile diameter: 16 mm -Dimensions: see photos -Dimensions: 118/110/H58 mm -Weight: 0.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Ulisch, tube bending tool made for profile bending machine -Type: 3/8 -Hole: Ø 26 mm -Dimensions: see photos -Dimensions: 76/40/H80 mm -Weight: 0.7 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Klaeger, pipe bending tool for profile bending machine -Type: R1/2 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 86/57/H56 mm -Weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 30 mm -Dimensions total: 110/90/H35 mm -Total weight: 1.5 kg

Tool transport trolley with shaft carrier Width 1,400 mm x Depth 600 mm Height 1,300 mm with wave carrier Weight approx. 110 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 30 mm -Dimensions total: 125/90/H55 mm -Total weight: 3.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 22 mm -Dimensions total: 105/65/H45 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 30 mm -Shipping/Price: complete -Dimensions total: 125/180/H50 mm -Total weight: 5.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 36 mm -Shipping/Price: complete -Dimensions total: 145/220/H63 mm -Total weight: 12.3 kg

Kunzmann WF4/3 - Universal milling machine - Heidenhain position display - Stepless feed in all axes - Rapid traverses in all axes - Hydraulic tightening system - Rigid angle table - Electrical central lubrication - Coolant device - Workplace lighting - Machine feet - Year of construction 1995 Specifications - Mount: SK40 - Speed range (infinitely variable): 40 - 2550 rpm - Travel X/Y/Z: 400 / 320 / 400 mm - Feed X/Y/Z: 0 - 2000 mm/min - Quill stroke vertical: 60 mm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1500 kg

Press brake tool, bending tool, die, upper knife, upper tool, straight tool -Bending tool: length 515 mm -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 515/14/H75 mm -Weight: 3.8 kg

4 - Stations Tool Grinding Machine Pre-grinding - disc 200 x 50 x 5 1mm - table size 400 x 200 mm Regrinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm Lap Cut - Disc / Diamond 125 - 12.5 x 51 mm - Table Size 400 x 200 mm Chip guide - disc -150 x 8 x 51 mm Coolant Setup Task light Engine speed 1,400 / 2,800 rpm Electrical values 380 V / 0.37 / 0.6 KW Space requirement W - 1,100 x D - 1,000 x H - 1,400 mm Weight approx. 340 kg

Flame cutting system, torch, oxy-fuel cutting system, machine cutting torch -Manufacturer: Messer Griesheim, machine cutting torch -3 connections: gas/oxygen/cutting oxygen -Dimensions: 540/180/120 mm -Weight: 4.1 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 24 m -Transport dimensions: 400/400/H100 mm -Weight: 14.5 kg

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 12 mm -Length: 40 m -Transport dimensions: 560/220/H500 mm -Weight: 21.2 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 12 mm -Length: 20 m -Transport dimensions: 380/150/H400 mm -Weight: 13.8 kg

Key data: 600 mm, 525 mm, 200 mm

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 40 m -Transport dimensions: 480/100/H480 mm -Weight: 20.3 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: Ø 420 x 100 mm -Weight: 11.5 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 4 pieces -Profile diameter: 21 mm -Hole: Ø 36 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 205/93/H65 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 26 mm -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 87/50/H66 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 21/26/52 mm see photos -Hole: Ø 36 mm -Shipping/Price: complete -Transport dimensions: 190/185/H115 mm -Weight: 10.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 62 mm see photos -Hole: Ø 31 mm -Transport dimensions: 295/115/H90 mm -Weight: 6.1 kg

pressure: 360 t stroke: 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LCD touchscreen display, control panel SIEMENS SIMATIC PANEL 1P 6AV6642-0BA01-1AX0 ( 1P6AV6642-0BA01-1AX0 ) used ! Dimensions: 210 x 160 x 50 mm

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 40 mm -Dimensions total: 107/120/H55 mm -Total weight: 3.2 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg

Touch panel, touchscreen display, control panel SÜTRON TP32ET-01/029049 Display area: 215 x 162 mm 24 V DC 0.7 A used, tested ! Dimensions: 330 x 250 x 70 mm

Drum pliers, round profile pliers TAKRAF ZFH 025 ( ZFH025 ) 250 kg Gripping width: 370 / 630 mm used, tested ! Dimensions: 1000 x 780 x 520 mm Weight: 34 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 18 to 44 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 255/350/H55 mm -Weight: 11.3 kg

Tool cabinet, drawer cabinet with base PAGUS 555 x 735 x 700 (usable height) mm 4 drawers used, tested ! Dimensions (cabinet): 555 x 745 x 820 mm Dimensions: 555 x 745 x 1025 mm

Tool cabinet, drawer cabinet PAGUS 390 x 340 x 935 (usable height) mm 8 drawers approx. 110 mm depth used ! Dimensions: 390 x 360 x 1000 mm

Bending tool, bending tool, die, upper blade, upper tool, straightening tool -Bending tool: Length 1760 mm -Tool angle: 83° -Dimensions: see drawing in the photos -Dimensions: 1760/28/H144 mm -Weight: 44.6 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 600 mm -Dimensions: see photos -Overall dimensions: 600/85/H115 mm -Weight: 40.6 kg

Tool cabinet with 8 mm steel plate Pagus Heavy duty version width: 2000 mm depth: 1000 mm height: 1020 mm made of sheet steel with 2 doors with 2 trays New ! 330 kg

Tooth thickness gauge MFV NII 240 - 76 Dimensions: 205 x 190 x 70 mm

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 300 mm -Dimensions: see photos -Overall dimensions: 300/80/H110 mm -Weight: 17.9 kg

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, Touch Panel Simatic IPC277DE 19 -Type: 6AV7882-0EB20-2EF0 IPC277DE -Voltage: 24V -Dimensions: 485/340/H80 mm -Weight: 5.8 kg

Signal towers, signal lights, signal lamps, indicator lights, signal light columns, light signal alarm systems -Manufacturer: Siemens, Signal tower 2 colors -Type: 8WD4 -Voltage: 24 V -Number: 2x signal towers available -Price: per piece -Dimensions: Ø 70 x 265 mm -Weight: 0.2 kg/pc.

Micrometer with prism anvil MITUTOYO range: 25-40 mm accuracy: 0.01 mm with protective box 21x13x4 cm

Tolerance Tester, Indoor Measuring Device, Measuring Table with Column Guide FEINMESSZEUGFABRIK SUHL Tolerance Tester for Bores Measuring Range: 10 - 20 mm Working Area: 80 x 40 mm Height Max: 95 mm with Wooden Box Dimensions: 300 x 260 x 450 mm

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 910 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without key -Weight: 51 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 955 mm -Depth: 440 mm -Height: 1950 mm -Door: lockable, without key -Weight: 66 kg