pack to pack used for sale

Tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Swedturn, Type ST12 CNC 300 tool changer -Tool turret: for max. 12 tools -Tool holder: Ø 60 mm -Individual components: see photos -Dimensions: 565/470/H565 mm -Weight: 319 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, T-slot clamps -Clamping tool: groove width 34 mm -Number: 23 x clamping tools available -Price: per piece, minimum order 2 pieces -Dimensions: 160/72/H7 mm -Weight: 0.2 kg/piece

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: Item No.: 12 00 00 204 RT8 -Profile diameter: 25 mm / 1 -Dimensions: see photos -Dimensions: 175/140/H82 mm -Weight: 3.8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 47 mm -Mounting: Ø 33 mm -Dimensions: see photos -Dimensions: Ø 125 x 84 mm -Weight: 4.3 kg

chamfer lenght: 3050 - 4020 mm 2 pieces of upper tools for press brake: Deer foot upper tool No.1, picture. No. 2: Dimensions: 3000 x 75 mm, price = 670,-- Deer foot upper tool No.2, picture. No. 3: Dimensions: 3000 x 120 mm, price = 670,-- Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: mm -Hole: Ø 20 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 163/82/H98 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 22 mm -Dimensions: see photos -Dimensions: Ø 102 x 113 mm -Weight: 4.0 kg

3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 3/4 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 110/75/H55 mm -Weight: 1.5 kg

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 91/63/H51 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 15 mm -Dimensions: see photos -Dimensions: 130/65/H65 mm -Weight: 1.3 kg

length: 700 mm width: 700 mm height: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 1 1/4 -Hole: Ø 20 mm -Dimensions: see photos -Dimensions: Ø 72 x 90 mm -Weight: 1.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 16 mm -Dimensions: see photos -Dimensions: 300/97/H100 mm -Weight: 3.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Hilmor, aluminum tube bending tool for profile bending machine -Profile diameter: 16 mm -Dimensions: see photos -Dimensions: 118/110/H58 mm -Weight: 0.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Ulisch, tube bending tool made for profile bending machine -Type: 3/8 -Hole: Ø 26 mm -Dimensions: see photos -Dimensions: 76/40/H80 mm -Weight: 0.7 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Klaeger, pipe bending tool for profile bending machine -Type: R1/2 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 86/57/H56 mm -Weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 30 mm -Dimensions total: 110/90/H35 mm -Total weight: 1.5 kg

Tool transport trolley with shaft carrier Width 1,400 mm x Depth 600 mm Height 1,300 mm with wave carrier Weight approx. 110 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 30 mm -Dimensions total: 125/90/H55 mm -Total weight: 3.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 22 mm -Dimensions total: 105/65/H45 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 30 mm -Shipping/Price: complete -Dimensions total: 125/180/H50 mm -Total weight: 5.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 36 mm -Shipping/Price: complete -Dimensions total: 145/220/H63 mm -Total weight: 12.3 kg

Kunzmann WF4/3 - Universal milling machine - Heidenhain position display - Stepless feed in all axes - Rapid traverses in all axes - Hydraulic tightening system - Rigid angle table - Electrical central lubrication - Coolant device - Workplace lighting - Machine feet - Year of construction 1995 Specifications - Mount: SK40 - Speed range (infinitely variable): 40 - 2550 rpm - Travel X/Y/Z: 400 / 320 / 400 mm - Feed X/Y/Z: 0 - 2000 mm/min - Quill stroke vertical: 60 mm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1500 kg

Press brake tool, bending tool, die, upper knife, upper tool, straight tool -Bending tool: length 515 mm -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 515/14/H75 mm -Weight: 3.8 kg

4 - Stations Tool Grinding Machine Pre-grinding - disc 200 x 50 x 5 1mm - table size 400 x 200 mm Regrinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm Lap Cut - Disc / Diamond 125 - 12.5 x 51 mm - Table Size 400 x 200 mm Chip guide - disc -150 x 8 x 51 mm Coolant Setup Task light Engine speed 1,400 / 2,800 rpm Electrical values 380 V / 0.37 / 0.6 KW Space requirement W - 1,100 x D - 1,000 x H - 1,400 mm Weight approx. 340 kg

Flame cutting system, torch, oxy-fuel cutting system, machine cutting torch -Manufacturer: Messer Griesheim, machine cutting torch -3 connections: gas/oxygen/cutting oxygen -Dimensions: 540/180/120 mm -Weight: 4.1 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 24 m -Transport dimensions: 400/400/H100 mm -Weight: 14.5 kg

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 12 mm -Length: 40 m -Transport dimensions: 560/220/H500 mm -Weight: 21.2 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 12 mm -Length: 20 m -Transport dimensions: 380/150/H400 mm -Weight: 13.8 kg

Key data: 600 mm, 525 mm, 200 mm

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 40 m -Transport dimensions: 480/100/H480 mm -Weight: 20.3 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: Ø 420 x 100 mm -Weight: 11.5 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 4 pieces -Profile diameter: 21 mm -Hole: Ø 36 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 205/93/H65 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 26 mm -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 87/50/H66 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 21/26/52 mm see photos -Hole: Ø 36 mm -Shipping/Price: complete -Transport dimensions: 190/185/H115 mm -Weight: 10.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 62 mm see photos -Hole: Ø 31 mm -Transport dimensions: 295/115/H90 mm -Weight: 6.1 kg

pressure: 360 t stroke: 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LCD touchscreen display, control panel SIEMENS SIMATIC PANEL 1P 6AV6642-0BA01-1AX0 ( 1P6AV6642-0BA01-1AX0 ) used ! Dimensions: 210 x 160 x 50 mm

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 40 mm -Dimensions total: 107/120/H55 mm -Total weight: 3.2 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg

Touch panel, touchscreen display, control panel SÜTRON TP32ET-01/029049 Display area: 215 x 162 mm 24 V DC 0.7 A used, tested ! Dimensions: 330 x 250 x 70 mm

Drum pliers, round profile pliers TAKRAF ZFH 025 ( ZFH025 ) 250 kg Gripping width: 370 / 630 mm used, tested ! Dimensions: 1000 x 780 x 520 mm Weight: 34 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 18 to 44 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 255/350/H55 mm -Weight: 11.3 kg

Tool cabinet, drawer cabinet with base PAGUS 555 x 735 x 700 (usable height) mm 4 drawers used, tested ! Dimensions (cabinet): 555 x 745 x 820 mm Dimensions: 555 x 745 x 1025 mm

Tool cabinet, drawer cabinet PAGUS 390 x 340 x 935 (usable height) mm 8 drawers approx. 110 mm depth used ! Dimensions: 390 x 360 x 1000 mm

Bending tool, bending tool, die, upper blade, upper tool, straightening tool -Bending tool: Length 1760 mm -Tool angle: 83° -Dimensions: see drawing in the photos -Dimensions: 1760/28/H144 mm -Weight: 44.6 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 600 mm -Dimensions: see photos -Overall dimensions: 600/85/H115 mm -Weight: 40.6 kg