pack to pack used for sale

Food Tools 5AFCE Cheese cutter Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries

Circumferential diameter over bed ... 840mm Turning length ... 2750mm Max.workpiece weight ... 6000kg Circumferential diameter via support ... 530mm Spindle bore... 82mm Spindle speed ... 7-900 rpm The machine is in good condition, possible to test under power.

Key data: 1 mm, 50 mm

Hebrock TOP 2000 edge banding machine – overhauled, serviced & ready for immediate use – others just push through – we check! For sale is a Hebrock TOP 2000, built in 2003, in well-maintained and technically revised condition. Radius / chamfer pneumatically adjustable. Heated inlet ruler. The machine has been extensively overhauled by us: • Most of the pneumatic hoses renewed • Replaced several pneumatic cylinders → Typical wear parts have already been dealt with and are unlikely to be an issue in the next few years. Safety switch also renewed. In addition, the machine comes from a company where specialist fitters were regularly on site for maintenance – recognisable by the existing maintenance stickers. → This speaks for a continuously maintained technical condition. Technical data: • Voltage: 400V 50 Hz • Power consumption: 6.9 kW • Current  ...

Year of manufacture: 1994 / overhauled: 2025 Circumferential diameter over bed ... 630mm Turning length ... 2000mm Circumferential diameter via support ... 340mm Main engine power ... 7.5kW L x W x H ... 4000 x 1400 x 1520mm Machine weight ... 2960kg The machine is in very good condition - after the general overhaul. More info on request. It is possible to visit our warehouse in Brno.

Description Tapping machine Rems Tornado type 2010 220V, 50Hz used device Threading machine for pipe threads (1/16) 1/8 – 2", 16 – 63 mm, bolt thread (6) 10 – 60 mm, 1/4 – 2". With maintenance-free gearbox, safety foot switch with emergency stop, 2 automatic chucks, automatic lubrication cooling. With tool set, consisting of a universal automatic cutting head for all threads, including long threads, automatically opening, with automatic thread length for tapered threads, cutting jaws for pipe threads tapered ISO 7-1, EN 10226 (DIN 2999, BSPT) R 1/2- 3/4 and R 1 – 2

Description Label Printer Toshiba B-472-QP TEC Identical label printer Stielow 3565 with rewinder – Serial interface, 25 pin – Technology: Thermal Transfer – Resolution: approx. 200 DPI – Print width: max. 104 mm – Print speed: up to 250 mm/ second Thermal transfer ribbons for thermal transfer printers, 80 mm x 600 m, 1", wax-resin quality, flush on the outside, rolled up on a 1 inch cardboard tube. The ribbons have an outwardly wound wax coating / color side and are suitable for near-edge print heads.

Description Format 66 x 84cm DCT Control Inclined roller table Ruler position as 3rd. Movement with 4 pockets 66cm and downstream knife shaft

Description This sensational, versatile tool with a diameter of 35 mm solves your cutting and micro-perforation problems in one fell swoop. Only one tool for micro-perforation, cut-off, cut-out, edge trimming and scribing.

Description Torre MiniPack Mailbag from 2006 is the automatic vertical packaging machine, ideal for magazines, newsletters, catalogues and publications. The film spool on this machine is mounted on a motorised roller. A folding device bends the film into a closed bag that contains the product. At the end of the process, the product is automatically ejected.

This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 – 12,000 rpm. The machine includes a linear tool system with 6 tool positions and full machining capabilities for turning, drilling, tapping, and threading. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 13 b Swiss Type Lathe we have for sale. Contact us for further details.

This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details.

Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition

Inv. Num. : 9082 Type: SKJ 8 NC Producer: TOS Created: GO 2020 Parameters: Control system: MEFI CNC 872 Max. workpiece diameter: 800 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Length: 2000 mm Width: 2550 mm Height: 3700 mm Weight: 10000 kg Equipment: Hydraulic table clamping Electric rotation of the cutter head Ball screws GO 2020: Complete machine overhaul with conversion to a new MEFI CNC 872 control system Conversion from the original hydraulic drives to Yaskawa servo motors New electrical installation New hydraulic system and central lubrication

Key data: 4 t

C-frame press for clinch technology Pressing force 4.8 tons. Air pressure 6 bar, 32 mm total stroke 3 mm power stroke, no tools available

A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production lin ...

A motorized transport trolley with a cover is available. Load capacity: 300kg, max. speed: 6km/h, steering roller diameter: 260mm, drive wheel diameter: 350mm, loading surface dimensions X/Y: 1250mm/600mm, machine dimensions X/Y/Z: approx. 1650mm/600mm/1750mm, weight: approx. 170kg. Documentation available. An on-site inspection is possible.

This 3-axis TOS Olomouc FV30 CNC A was manufactured in 2015. It features a spindle speed range of 50-6000 rpm and a tool changer with 12 positions. The machine has a maximum workpiece weight capacity of 360 kg and working strokes of 760 mm in the X-axis, 380 mm in the Y-axis, and 152 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the TOS Olomouc FV30 CNC A vertical machining centre we have for sale. Contact us for further details.

Vertical grinder for the production of pearl barley, spelt and einkorn rice as well as for grinding lentils

AUTOMATIC EDGE SANDING machine with 3 units , model TONELLI OTB.15 ( made in ITALY ) second hand machine working condition: Excellent, like new CE regulation: YES voltage: 380/50 for sanding panel edges, on raw and painted edges, flat and shaped, solid, veneered, profiles, frames and various technical data: electric working height adjustment minimum working height: mm.3 maximum working height: mm.100 minimum working width: mm.60 track feed speed adjustable from the control panel: from 5 m/min to 30 m/min track feed with rubber pads and adjustable rubber pressure wheels feed track motor power: 2 HP machine composed of 3 independent units: 1° unit : tilting oscillating sanding unit - pneumatic pad - motor 2 speeds Hp 1,9 / 3,3 - automatic group entry - belt cleaning blower 2° unit : 45° oscillating sanding unit - pneumatic pad - motor 2 speeds Hp 0,6 / 1,2 - autom ...

Code: 0372 Brand: CASOLIN Model: TOP 530 Automatic thickness planer for wood, joinery, furniture, customer-made furniture, wooden joinery, doors, panels, timber framing, sawmills, plastics, composite materials and various Features: Cast iron work table supported by 4 ground columns with inner rise screw syncronously which guarantees the greates rigidity, the work surface of thicknessing table, worked with a particular processing, guarantees excellent performance of guidance and sliding of the workpiece Automatic locking of thicknessing table Shaft with 4 replaceable cutters ‘TERSA’ Rear pressure roller adjustable to 3 positions Steel feed rollers Technical data: Max working width 530 mm Work table dimensions 530 x 1060 mm Max working height 300 mm Min working height 3 mm Useful thickness 8 mm N° 4 replaceable cutters ‘TERSA’ Shaft rotation speed 5000 rp ...

This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It features continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine includes an automatic 4-station tool changer and a dual 0” reference laser for precise positioning. If you are looking to get high-quality CNC processing capabilities, consider the VITAP Point K2 TOP 2.0 machine we have for sale. Contact us for further details.

CNC horizontal boring machine Type: WHN 13.8 B Manufacturer: TOS Year: 1987 In 2026 control replacement for Heidenhain TNC 530 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Spindle diameter: 130 mm Spindle taper: ISO 50 Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

Demag hoist 10 ton Kind of: hoist Capacity: 10 ton Drop: 6,5 meter Tackle speed: 0,6 & 6 m/min

CNC - Bearbeitungszentrum Fabrikat: COMEC Typ: MD TOP XL Die ideale Lösung für CNC - Bearbeitungen an schmalen, komplizierten Werkstücken COMEC macht´s Ihnen einfach Kopfkonfigurationen individuell konfigurierbar für: - Sägen mit 360 Grad - Achse - Fräsaggregate für horizontale und vertikale Bearbeitungen - Bohrköpfe mit einzeln abrufbaren Spindeln vertikal und horizontal - Mehrspindelreihenbohrköpfe einzeln abrufbar auch horizontal - Horizontalfräsaggregat mit 360 Grad C - Achse Speziell entwickelter Spanntisch, verfährt in X - Richtung automatisch programmgesteuert Individuelle Ausstattung möglich, zum Beispiel: Grundrahmen Schwerer Grundmaschinenständer, Elektroverschweißt. Maximale Werkstückgrößen: X-Achse 3350 mm (oder 1500 + 1500 mm in zwei Arbeitsfeldern) Y-Achse 200 mm Z-Achse 180 mm Verfahrbarer Aggregateträger 3  ...

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm

Size: 450 x 460 mm Equipments: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Fork length 250 cm width 30 cm

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch Pro With surface copying function with floating bell GX1 or GX2 or GX4 Max. drive speed 18,000 R.P.M Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 20 Nm Tool interface: modular for ER 25, ER 32, saw flange, shrink- fit chuck

CNC horizontal boring machine Type: WHN 13.8 A-CNC Manufacturer: TOS Year: 1979 Overhaul: 2007 Control: Heidenhain TNC 530 Spindle diameter: 130 mm Spindle taper: ISO 50 Spindle speed: 10-3000 rpm Main motor power: 37 kW X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 44000 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 110mm, max. workpiece length: 350mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible.

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson, Filter system cartridge filter -Type: Torit Downflo DF 6 -Motor power: 3 kW -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic -Extraction opening: 3x Ø 320 mm -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg

A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 81mm, max. workpiece length: 340mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible.

The oven works perfectly

offered without plates. Plates maximum: 100 Plate formats: 600x600 Platefilter features: Electric-Hydraulic press dimension ca. 380x80x120 cm Distance between first plate and spindle approx ca. 180cm

Filter area: 3 m2 Installed power: 2,45 kW Horizontal disk filter with manual discharge system This filter uses the horizontal disc system, the only type able to ensure the panel is undamaged even by accidental interruptions in filtration. There is no risk to the panel even in the event of incorrect operation or power cuts. The liquid in the vessel, batching unit and pipes is filtered perfectly at the end of work using a special disc for the purpose. The special filter unit used means that cleaning can be carried out simply using a jet of water and the sped al chute supplied. Manufactured in stainless steel throughout, including the feed pump, pipes, valves and caster-mounted frame. Complete kieselgur batching system with vanable delivery piston pump and stainless steel tank with built-in electric mixer. Electric panel complete with every control and safety device required for safe, depe ...

ZM coil clamp 5 ton

ZM coil clamp 15 ton

Hijshaak voor spoelen Armlengte: 930 mm

Hijshaak voor spoelen Armlengte: 800 mm

Hijshaak voor spoelen Armlengte: 1000 mm

Hijshaak voor spoelen Armlengte: 1220 mm Gewicht: 1050 kg

This 3-axis TOYODA FV 1165 was manufactured in 2008. It features a spindle speed of 12,000 rpm and a robust table size of 1300 x 650 mm, with a maximum table load capacity of 1,500 kg. The machine is equipped with a FANUC 18 iMB control and has a tool capacity of 30 tools. If you are looking to get high-quality CNC milling capabilities, consider the TOYODA FV 1165 vertical machining center we have for sale. Contact us for further details.

Key data: 50 mm, 600 , 1200

100 pcs TORRI type used shelf .

This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of +50 / -50 mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details.

Key data: 50 mm, 600 , 1200

TORRI type used shelf

Inv. Num. : 9141 Type: W 100 Producer: TOS Created: 1973 Parameters: Work table length: 1250 mm Work table width: 1250 mm Maximum weight of the workpiece: 3000 kg X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Machine weight: 14000 kg

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Year of construction unknown The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be installed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Serial number 0042-08-2006 The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be installed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement.