pack to pack used for sale

Industriële trailer die met een vorkheftruck verplaatst moet worden. Kind off: industrial trailer Number of axles: 1 axle Loading capacity: 30 ton Length: 10 meter Breadth: 1300 mm

For sale is a solid electric pallet truck / lifting ant with folding driver platform from Toyota BT (BT Levio P-Series) from 2008. The device comes from a site clearance of a freight forwarder, has been regularly serviced and is in good, used condition with usual signs of use (see pictures). Fully functional and ready to use. The next UVV inspection was due in February 2026 – on request, we will be happy to carry out a new UVV inspection before delivery (costs on request and priced in if necessary). Particularly attractive: The battery is young and dates from 2022! Technical details: • Manufacturer: Toyota BT • Model: LPE200/8 (with folding driver's platform and safety bars) • Year of construction: 2008 • Operating voltage: 24 V • Nominal load capacity: 2,000 kg • Lifting height: 205 mm • Battery weight min/max: 220–250 kg • Empty weight (approx., withou ...

- Extended long fork - Fork extensions ca 2500 mm - Seperate loader - Closed cabin - Only 2000 Hours

Freelift Triplex mast Dieselmotor Kind off: forklift Number of axles: 2 axles Loading capacity: 3,5 ton Weight: 6250 kg Max arrow height: 4060 mm

Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details.

Manufacturer: Tonello Model: Laser Blaze 250TN Year of Manufacture: 2011 aprox 1,4x1,4m garments, for denim fabrics Find more here - .ucymachines/ Contact us at - sales@ucymachines

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

Stock number: 3994 GABELSTABLER Manufacturer: TRUCKGAFLER VETTER , Type: 7 - 8 - 10 T Ton Year of Make: 2021 Specifications: Lifting capacity 10,000 kg Forklength 2400 mm mm Fork width 200 mm Tykkelse 60 mm

Removal system for lid to capsule 16-fold Abstract: The lids are removed from the open mold with the removal arm. The injected products are removed from the ejector side. On the removal arm, the presence of the parts is controlled. Once the unloading arm has reached its end position, the lid with a vertical servo axis into the waiting box, As soon as the box is full (counting the lids), the box is transported outside and the next empty box is pulled in. Specifications: Product Type: Round Lid Dimensions: DN 50 mm Height: 6 mm Number of cavities: 16 Cycle time of the IML system: 5 s

Rotary cultivator Pellenc Tournesol TS 1000 LD, three-point rear attachment, tool Rotary cultivator with 2 movable cutter blades on the boom (manual length adjustment approx. +/- 25 cm), hydraulic drive by means of 540 rpm push-on PTO pump, hydraulic lifting (1 x hydraulic connection ew required). Support and evasion function can be adjusted several times, solid sliding shoe (approx. 60 kg). Year of manufacture 2014, used. Manufacturer's specs: For tractors 50 hp, hydraulics 30-40 ltr. /min. at 180 bar, working speed max. 5 km/h, vine width min. 2.20 m.

This 3-axis TOPEDM TSH-400N die-sinking EDM machine was manufactured in 2005. It features a working area of 400 x 400 x 440 mm and a table size of 480 x 458 mm. The machine is capable of drilling holes with diameters ranging from 0.15 to 6.0 mm. If you are looking to get high-quality hole drilling capabilities, consider the TOPEDM TSH-400N machine we have for sale. Contact us for further details.

Name: FANUC Servo Motor Model OM Manufacturer: FANUC (Tokyo, Japan) Type: A06B-06 Country: Japan Short Description: Original FANUC servo motor model OM with integrated encoder.

Inv. Num. : 8473 Type: AS14 Producer: Tornos Generated: Parameters: Max. rod diameter: 14 mm Maximum turning length: 3000 mm Number of spindles: 6 pieces Maximum main spindle power: 7.5 kW Maximum spindle speed: 6000 1/min Length: 2150 mm Width: 820 mm Height: 1466 mm Weight: 2500 kg

Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

CNC machining center FEHLMANN Picomax 56 TOP TECHNICAL FEATURES: Year: 2015 CNC Type: HEIDENHAIN TNC 620 X-axis travel: 500 [mm] Y-axis travel: 400 [mm] Z-axis travel: 400 [mm] X, Y and Z axis travel speed: 20000 [mm/min] Min. Distance. Spindle/Table: 120 [mm] Max. distance spindle/table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. weight permissible on the table: 250 [Kg] Pin attachment: ISO 30 Maximum speed Spindle: 12000 [rpm] Number of tool magazine stations: 20 Max. Length of Tool: 240 [mm] Maximum weight per tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool Change Time: 3 [sec] Time between cuts: 8 [sec] Number of cutting hours: 1463 [h] Rated Current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] EQUIPMENT INCLUDED: HEIDENHAIN measuring rulers on the X, Y and Z axes x1 FRIBOSA Switzerland precision clamping vice x1 RENISHAW par ...

Type: SWE140 Maximum lifting height: 3655 mm Maximum lifting capacity: 1400 kg

TWIN SCREW EXTRUSION LINE, Top Italian Constructor, for PVC both soft and rigid, max infeed 10-12 mm size, forced feeding hopper, dosing unit, 2 parallel, counter-rotating screws 118 mm diam. 25 L/D, pressure control;, nitrided steel barrel with degassing vent 2,2 kW, Barrel heating bands kW 76,00, Extruder cooling barrel motors power 4x 0,37 kw, n.7 Heating zones, Extruder a.c. motor 120 KW, Extruder tot power 205 kw, Extruder average absorbed power 105,00 kW, Extruder rpm 8-45, Lubrication pump 1,50 kW, Electric cabinet with inverter and modem for remote diagnosis, semi automatic screenchanger for PVC, granulating head, die face dry pelletizer, cooling unit, Installation and start up included (boarding and travel costs on Buyers charge), Total installed power: 205 kw - 105 kw average in use

EWD - GILLET log bandsaw line with canter and double-cut, - Heavy duty log loading deck, - EWD hydraulic log carriage, type EW 1000, - GILLET canter, type SL, - GILLET bandsaw machine, type TO1600, - Outfeed conveyor, - Control unit with Mudata controller

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement

Double-end profiler doorway Working width 2600 mm 2 units per side: 1 flaker 3.7 kW at 50 Hz / 5.5 kW at 100 Hz 1 milling spindle 5.5 kW Spindle diameter 35 mm, approx. spindle length 80 mm All units can be swivelled and adjusted in width and height 1 swivelling control panel on each side Manual control unit for forward and reverse flow Transport chain with retractable cams, cam spacing 615 mm Protrusion of the lower transport chain 460 mm, together with table supports 880 mm kpl. with converter Himmelreich 2390 rpm at 50 Hz, 3000 rpm at 100 Hz Transport dimensions: Machine: L 4300 mm x W 2200 mm x H 1900 mm The converter stands on a Euro pallet L 1200 x W 800 x H 1000 mm Accessories on a Euro pallet L 1200 x W 800 x H 1000 mm

Manufacturer: TOOL-TEMP Model: TT-28000 DG Type of Machine: Temperature Control System Voltage (Volt): 3-phase, 380–415 V Power (Watt): 3 × 9000 W Frequency (Hz): 50 Hz Refrigerant Gas (Gas): R-134a Refrigerant Quantity: 10 kg I have to guess the year it was built—around 2013. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Falzmaschine / Folding machine Heidelberg TD66/6-4-4 Year 1998 Round Pile Feeder  Folding Type 6 - 4 - 2 buckles Press Delivery

SICAR band saw mod. TOP 9 -Diam. flywheel mm. 900 - Year 1996 - Matr. 008037280596

turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 140 °C

Temperature control unit of the tools - Tool Temp TT-118K / MP-988 (3 pcs.) Year of Make: 2020 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium - water Power: 29.3 Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 90 °C

Temperature control unit of tools - Tool Temp TT-188 (20 pcs.) Year of construction: Location: Lodz, Poland Description: Max. heating capacity - 90°C Heat transfer medium – water Power: 9850 watts Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

4 column press Tox MAg 008288A001 BJ 2016

Speed: 12.5-2000/min, with documentation. An on-site inspection is possible.

120651 Hoofdgedeelte van de fakkel NIEUW 2405 GEMAAKT IN DE VS 2 stuks op voorraad, NIEUW

A Donaldson dust collector for manual grinding workstations is offered. Airflow: 12000m³/h, negative pressure: 3200Pa, number of filter elements: 16, filter area: 336m², motor power: 30kW, speed: 2945rpm, operating point: 12000m³/h at 4450Pa and 23.8kW. Equipped with fan EUM 600/400-2, year of manufacture 2015, and electric motor type 200 L/2, 2-pole, 30kW, 50Hz. Airflow: 7500/18900m³/h, pressure: 6200/3900Pa. Inspection by appointment possible.

HBM WHN 13.8C CNC

Electrohydraulic Scissor Fork StackerScissor Pallet Truck, Pallet Pallet TruckTOYOTA / BT Type HTH 10 EFabr. No. 481795 year of manufacture 2005Lifting capacity 1000 kgLifting height max. 800 mmOverall height drained 85 mmFork length 1190 mm- Electric stroke via 12 volts Battery operated- Manual stroke via hand lever as on the pallet truck- TOYOTA Industrial Equipment Europe SARL (Made in France)- Long-stroke hydraulic cylinder- with single roller- Integrated charger (mains voltage 230 Volts, with IEC plug)Net weight 140

Year approx 1992 size 50x70

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Emerson Macchine Torino Type: Carrera 700 Year of Make: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y stroke: 1,000 x 290 mm • Stroke of the Z-table: 400 mm • Distance from spindle table: 140 - 540 mm • Distance from spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver •Transmission • Horizontal spindle • Automatic feeds on the axles • Automatic spindle descent •Chiller � ...

Folding box cartoner

2 pieces HEIN fully automatic proofers, type: TopLine -as good as new- - incl. 2 trolleys, front axle, 20 cushions, 80 x 60 cm - incl. 2 trolleys, front axle, 19 cushions, 80 x 60 cm The 2 proofers are in very good condition. Sold due to closure. Hardly been in use. More pictures and information on request.

SHIFT PULLEYS ,MAX DIAM 600 ,MAX MODUL 6

Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible.

Table dimensions 1080 x 700 mm, 30? tiltable Wheel diameter 800 mm. Wheel width 40 mm. Max. cutting height 350 mm. Max. cutting width 660 mm. Cutting length: 5620 mm. Motor power 4 kW. Extraction nozzle diameter 120 mm.

Table dimensions 830 x 600 mm, 30? tiltable Wheel diameter 600 mm. Wheel width 25 mm. Max. cutting height 295 mm. Max. cutting width 510 mm. Cutting length: 4380 mm. Motor power 2,2 kW. Extraction nozzle diameter 80 mm.

TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Table sizes: 3000 x 850 mm. Motor: 3 kW Belt sizes: 150 x 7800 mm. Motorised height adjustment

TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Year of Manufacture: 1984 Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Tool Holder Type: Spring/Clamp Chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)