pack to pack used for sale

Automatic scale with ejector and roller transport max 40 kg for various max 300mm wide containers

2 x in stock

1 Melting Furnace Mfc.: De Winter Built: 2014 Type: 2 Chambers furnace Capacity: 75 Ton – 6.5 t/h

1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW

Spindle and nut X-axis 1015037

Used automatic labeling machine from KOSME model TOP STAR 960 20T S2 E4. New 2003. For paper labels (main and counter) cold glue. The labeling machine is equipped with two stations with label magazines. Each station has five label transfer pads. The carousel is equipped with 20 plates. General overhaul carried out in 2018.

Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel -Manufacturer: Siemens, Simatic Multi Touch -Type: unfortunately without nameplate -Quantity: 1x panel available -Price per piece -Transport dimensions: 940/570/H370 mm -Weight: 26 kg

Inv. Num. : 7717 Type:- Producer: Mettler Toledo Created: 2016 Parameters: The machine is in good condition.

for sale - PROFI Hydraulic Workshop Press HF2 30 tons Clear width 560 mm Hand and foot operation Piston stroke 160 mm Cylinder diameter 115 mm Weight approx. 165 kg further models and inquiries to FSA Maschinen AG

Description The TOWNSEND 9000 Automatic Skinner is a device that uses technology that allows the user to achieve high efficiency during the skiving process. The 9000A is the ideal solution because it removes the skin without damaging the meat. The skinner offers a wide range of possibilities that can be used for various types of meat, depending on the needs of the producer. The TOWNSEND 900 is a very safe, efficient, precise and reliable device in its class. The machine is an ideal solution for small and large processing plants. The skinner has a capacity of 1300 - 1800 pieces/h. Specification: Brand: TOWNSEND Model: 9000 Type: Skinner Dimensions: 1350 x 950 x 2100 ( mm ) Power supply: 400V 50Hz 3N Power: 1.5kw Belt width: 500 mm Knife width: 510 Capacity: 1300 - 1800 pcs/h

Dimensions: 3900x4600x2200mm Axle:XYZC (8-axis) Ø 100 x 100mm Bar Feeder:Ø52 Tool:BMT-55 Control:Fanuc 18 i-TB incl. BAR FEEDER - Profimat IRCO Breuning Dimensions: 1200x4000mm Year of Make: 2001 Ø 52 - 3000mm

faceplate diameter: 315 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. faceplate - diameter 315 mm bore 75 mm fastening: Camlock - 4 Pcs. 173 M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used proofing interrupter HEIN, type: Topline -In bakery condition- - new refrigerant 2022 - in operation until the end - Sale by closing the bakery - Plant still assembled Viewing possible.

Mori Seiki NL 2500 SY / 700 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX-850 III Main spindle nose: ASA 8 Main spindle power: 18.5Kw Main spindle bar pass: 80mm Turning diameter: 360mm Turning length: 705mm Main spindle speed: 4000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm First turret Z-axis travel: 795mm Fast feeds for linear axes X Y Z: 30m/min Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 6000 Counter spindle power: 11Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Presetting: yes Machine equipment: Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIGHT::: Length: 4420mm Width: 2 ...

grinding diameter: 630 mm grinding length: 4000 mm centre height: 335 mm total power requirement: 28 kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500

Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 1800mm Table diameter ... 1600mm Max. table load ... 12000kg Max. workpiece height ... 1275mm Axis Z ... 1000mm Plunger cut ... 180x220mm Number of positions in the tool changer ... 15 Axis C ... 360° cooling Work feed ... 4000mm/min Rapid traverse ... 10000m/min Main engine power ... 60kW Speed of the clamping plate ... 2-315/min Drezhal of powered tools ... 8-3300 rpm Machine weight ... 27200kg L x W x H ... 6300 x 6200 x 5500mm The machine has undergone a complete overhaul. With a one-year warranty. More info on request.

Electric Lifter, Capacity: 1500 KG

Control Fanuc ... 32i - B Turning diameter ... 20mm Turning length... 250mm Axis Y Tool turrets/driven tools ... 39/15 Bar Feeder Spindle speed ... 0-12000 rpm Machine weight ... 3300kg L x W x H ... 2100.0 × 1200.0 × 1900.0mm The machine is in good condition, possible to test under power.

Automatic plate loader Plate processor Automatic delivery. Stacker Program and Dongle Monthly contract serviced

Code: N0555 Brand: TOMAR Model: BELLAGIO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 300 Max distance between uprights mm 2600 Length of arms per side mm 780 Useful gap between arms mm 120 N° 20 Pvc coated shelves Load capacity kg 300 N° 4 swivel wheels for handling ( 2 with locking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 400 x 1900 h - Trolley max opening mm 1650 x 3000 x 1900 h Overall dimensions for transport: mm 1500 x 400 x 1900 h Weight kg 115

COLCHESTER TORNADO 110 CNC turning center was built in England in 1998. The machine, designed for precision machining of workpieces with a maximum diameter of 420 mm, features a fully illuminated work space that includes among others a 12-position turret and an extremely powerful spindle. The inclined bed by 60° ensures excellent stability of the process, during even the most intense challenges. On top of this, the intuitive GE FANUC Series 21i-T CNC control allows advanced machining programmes to be created in just a few steps. The TORNADO 110 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 110 metal lathe - CNC controller: GE FANUC Series 21i-T - feed in the X/Z axis: 310/416 mm - rapid traverse in the X/Z axis: 15/20 m/min - load on the X/Z axis: 2.51/3.77 kN - turning diameter over bed: 420 mm - turning diameter over slide: 280 mm - maximum tur ...

COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...

Control Heidenhain TNC 355 Spindle diameter Ø 130 mm Horizontal Spindle Travel (W) 800 mm Taper ISO 50 P.D.B. Table 1,600 x 1,800 mm Max. load 12 Ton Cross travel (X) 3,500 mm Vertical travel headstock (Y) 2,000 mm Longitudinal travel (Z) 1,250 mm RPM 5 – 1,100 kW 32 Volts 400 Cycles 50

x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,56 x 2,56 x 1,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, Floor stand for cleaning cloth roll with waste bin -Type: W1 -Roller width: up to approx. 450 mm -Quantity: 5x cleaning roll holders available -Price: per piece -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/pc.

Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg

grinding diameter: 1000 mm grinding length: 2000 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

geared motor -Speed: 19.5 rpm -Power: 0.37 kW -Brake: 24 V -Design: B5 -Shaft: Ø 30 x 60 mm -Protection class: IP 65 -Quantity: 4 available -Price: per piece -Dimensions: 665/200/H250 mm

Geared motor, spur geared motor -Power: 0.25 kW -Speed: 43 rpm -Shaft: Ø 20 mm -Design: B14 -Protection rating: IP65 -Quantity: 1 available -Dimensions: 458/133/H215 mm -Weight: 17.7 kg

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

surface area: 800455 mm no. of flutes: - groove width: - mm weight of the machine ca.: t dimensions of the machine ca.: m Universal swivelling + tilting table Table top rotatable 360 Tiltable forwards/backwards -15 / 45° Sideways swivelling +/- 30 Cross adjustment ( Y ) 160 mm Mounting surface 350 x 250 mm ( additional adapter plate ) Table surface 800 x 455 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used automatic scales from Mettler-Toledo Garvens type XS3. New 2012. Automatic scale for single load checking. Technical data: - Max. belt speed: 60 m/min, - Throughput: 250 pcs/min, - Product weight: max. 1500 g - min. 7 g, - Air supply Min. 500 kPh, - Operating temperature range: 0 C° / +40 C°, - Power supply 100 - 240 V~ / 50-60 Hz.

Toshiba MMY-MAP1204HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 33.5 kW Heating power: 37.5 kW Refrigerant: R410A Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Toshiba MMY-MAP1604HT8P-E Air Conditioner Outdoor Unit with 6 Toshiba 4-way ceiling cassette for cold and heat incl. original Toshiba remote control Cooling power: 45 kW Power heating: 50 kW Refrigerant: R410A 2 sets available, each with 1 outdoor unit and 6 indoor ceiling cassettes including remote control Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: info(a)frigocom.at

Perforier- und Nutmaschine - Perforation and Creasing machine TORINO PD-1/B Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1-Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press TOKO 2000 Serial-Nr. 100722 Druckgeschwindigkeit / Production 10.000 Sheets/hr Elektrischer Anschluss / Power supply: 230V / 50Hz / 3,7A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 color Offset Press Serial-No. 497552 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 color Offset Press Serial-No. 495245 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Falzmaschine / Folding machine Heidelberg TD66/6-4-2 Year 1998 Round Pile Feeder  Folding Type 6 - 4 - 2 buckles Press Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Product number: 3054 Type: 9000 Serial number: 119 Year of construction: 1995 Cutting width: 520 mm Belt width: 480 mm Power: 3 x 380V, 50Hz, 1.5kW Dimensions: 2150 x 900 x 1350 mm Weight: 400 kg

6500ton Open Die Forging Press HJ / Seonam (Korea) Design: Eastern European Corporation Installation: 2006/2008 Press Type: Four column push down Oil hydraulic system Nominal force (static working pressure of 320 bar): 5,000 Tons Up-setting force (static working pressure of 420 bar): 6500 Tons Daylight: 5,200 mm Stroke of Movable cross head: 2,700 mm Main Ram dia. (Center cylinder): 1 set - ￠950 mm Side Ram dia. (Side cylinder): 2 sets - ￠750 mm Return cylinder Ram dia: 2 sets - ￠300 mm Moving Table Width: 2,600×Length 6,600 mm Moving Table stroke (center to both side 2,750mm): 5,500 mm Approaching speed: 300 mm/sec Main cylinder Forging speed (2,200 tons/ 320 bar): 163 mm/sec All cylinder Forging speed (5,000 tons/ 320 bar): 73 mm/sec Up-setting Forging speed (6,500 tons/ 420 bar): 10 mm/sec Return speed: 270 mm/sec Hydraulic Main pump: 12 sets  ...

hammer drill, chisel hammer, combi hammer, Bosch hammer, cordless hammer drill -Manufacturer: Bauhaus Toolson, cordless drill type PRO-AS 18 Li-1 -incl.: charger and battery -Number: 4x drill drivers available -Price: per piece -Transport dimensions: 240/180/H240 mm -Total weight: 1.9 kg/piece

Key data: 320 mm, 110 mm, 6

MAX DIAM 320

Key data: 100 t, 355 mm, 125 mm

Press force 100 t The dimensions of the table top 1000 x 640 mm Stroke adjustment 125 mm Plunger adjustment 90 mm Stroke rate 75-150 rpm Main motor power 6/10 kW Machine dimensions L x W x H 1725 x 2230 x 2970 mm Machine weight 10100 kg

Max. grinding diameter 200 mm Max. sanding length 600 mm Max. workpiece weight 60 kg Device for internal grinding: no Machine dimensions L x W x H 2100x1800x1500 mm Machine weight 2300 kg Center width 600 mm

collet chuck, tool holder, tool holder, milling chuck, milling tool -Collet holder: SK50 -Clamping sleeve: Ø31 mm -Dimensions: Ø 88 x 200 mm -Weight: 3.0 kg

Center spacing 1 000 mm Max. diameter of the cylinder to be ground 250 mm Minimum step of the X-axis 0.001 mm Minimum step of the Z-axis 0.005 (0.001) mm Circumferential speed of the grinding wheel 25 – 45 m/s Maximum weight of the workpiece between the tips 80 kg Maximum weight of the workpiece including pick-up – on-the-fly clamping 25 kg Grinding wheel diameter 400 mm Cizctcazsk Grinding head spindle drive 4 kW Kavalír CNC control system

1x CNC Table Boring Machine Manufacturer: TOS Type: WHQ Year of Make:1997 Control: Heidenhain TNC 426 in 5-axis X-axis 2000mm Y-axis 1400mm Z-axis 1250mm W-axis. 710 mm B-axis 360 degrees Spindle diameter : 112mm Spindle mount: ISO 50 Spindle speed max: 2000 rpm Table clamping surface: 1400x 1600mm Tool changer: 60 places Chip Conveyor: Yes