We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,441 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
R25187/17 PASQUINI & KROMER label machine model: Pakromat 250 S/2 age: 1999 about 1500 working hours available: immediately dimension: length: 3,5 m, height :2,10 m, depth ca. 1,7 m permanently maintained Available: sofort
used
Case label printer with topdown applicator and electric conveyor. Device is CE compliant.
used
TETRA PAK WRAP AROUND CARD BOARD PACKER, MODEL TCBP 70, MANUF. IN 2003, EXCELLENT CONDITION, VERSION 110, U-FORM. LAST WORKED FOR 1000 PRISMA.
Used Tetra Pak C3/Flex Make: Tetra Pak Type: C3/Flex ESL/DIMC F/10V Year of make: 2005 Capacity: 7000 units/hour Volume: 500 ml / 1000 ml Opening: simply twist Format: Tetra Brik Squareline Working hours: 36306 Condition: good used condition
used
1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material
used
ELO PAK Machine model S-PS 80HA Year: 2008 Capacity: 9,000 L / h Phase: 3 Voltage: 400 V Current: 177 A Frequency: 50 HZ Air pressure: Max.: 882 KPA Min: 588 KPA Air consump.: 1350 NL/min
new
Part no: 3799989, Typr: F12-060-MS-SV-S-000-000-0, Parker F12 Series Large Frame Fixed Displacement Twisted Axis Motor. Rated Speed: 5300 rpm, Flow Rated RPM: 68 gpm (257.4 lpm), Displacement: 60 cc/rev Outlet Pressure: 6,000 psi (420 bar). BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720
used
2-dispensing edges labeler type Pagomat 6/2 L-100 Non-Stop with Videojet. label width: 100mm.
used
automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side
used
Tetra Pak TPA 19 200ml Prisma Filling Line For Sale Item #: Usm-148 Category Tetra Pak TBA 19 One Used TPA 19 200ml Prisma Filling Line For Sale TPA 19 200ml Prisma Filling Machine, Working hours only 5300 Straw Applicator TSA 21, Year of manufacturing 2004 Packer TCBP 70, Year of manufacturing 1999 Conveyors & Paper Trolly Condition: Complete line & in excellent condition.
used
automatic baler Manufacturer: PAAL Type PACOMAT II S SO Year of construction: 1994 specifications: Pressing force: 50 t Specific pressing force: 7.14 kg/cm² Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm Drive power: 45 kW Throughput: approx. 170 m³/h automatic 4-fold horizontal binding
used
M. No.: 12091 Equipment / Additional information: DESCRIPTION: The sealers Pactur thanks to their production concepts, can be easily transported. The electronical control grants good performances and user friendly functioning. Although they have a limited foot print, are equipped with a real shrink tunnel, which grants high packaging perfomances and excellent results. The machine has two conveyor belt movement cycles, choiceable from the control panel: forward-forward and forward-reverse. Forward-Forward, with product outflow from the side opposite the load, for greater productivity. Forward-Backward, with product return to the operator, for fragile products or logistical needs. SECTORS OF USE: Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing. MAIN FEATURES: Semi-automatic sealer with shrinking tunnel Pactur type Lady Pack 45/SL 2 includ ...
used
automatic baler Manufacturer: PAAL Type: PACOMAT V-80 D Year of construction: 2018 Operating hours: 2,100 h specifications: Pressing force: 82 t Specific pressing force: 97 N/cm² Press pressure: 315 bar Channel format: 750 x 1,100 mm Filling opening: 1,600 x 1,020 mm Binding: 4-fold vertical Drive power: 22 kW Total connected load: 31 kW, 30 A Throughput: - approx. 275 m³/h max. at idle Machine weight: approx. 17 t
used
Baler Paal Pacomat II with hopper, year of construction 1979 Specifications: Manufacturer: Paal Type: Pacomat II Year of construction: 1979 Drive power: 11 kW Pressing force: 27 t Trunking cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: ca. 5200 kg
used
Labelling system Manufacturer PAGO Type Pagomat 6/2 Attachment control A 1051359 / G 0217601 Year of construction 2007
used
We offer, used, in current condition Paper roll trolley for e.g. Tetra Pak TBA 8 aseptic filling machine Subject to prior sale Pick-up or pick-up by truck with lifting platform or car with trailer
used
We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 8 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer
used
We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 9 / 19 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer
used
We offer, used, in the current condition paper roll trolley for e.g. Tetra Pak TBA 9 / 19 aseptic filling machine subject to prior sale self collection or collection with truck with lifting platform or car with trailer
used
automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side
used
TETRA PAK CARDBOARD PACKER MODEL TCBP70 VERSION 110 U-FORM YOM 2007 WRAP AROUND CAN BE COMPLETED BY THE TETRA SHRINK
used
Line for packing cut sheets Sheet packing system for a sheet metal cross-cutting unit. The packaging system cooperated with the sheet cross-cutting line. Basic parameters: Supported species: steel, aluminum Material thickness 0.4-4 [mm] Material width: Min. 500 [mm] Max. 1500 [mm] : Packing system prepared to pack material only on pallets or cross beams Maximum weight 5,000 [kg] 1 table Minimum and maximum sheet length: 500-7000 [mm] Width range: 500-1500 [mm] Maximum system speed 40 Automatic transport of parcels from the stacker to the packaging system Total length of the system is approximately 35 m We have a video recording of the operation of the entire packaging system.
used
Groninger MFCS 201R filling & closing machine for cremes, etc. in pots comprising pot & screw cap infeed via two (2) rotary infeed tables – filling station with product hopper with stirrer – sealing foil station – heat sealing station – screw capping station, Siemens SIMATIC S7-300, dosing up to 270 ml., capacity up to 60 pots per minute, linked directly to Pago System 502 labelling machine for wraparound, top & bottom labelling with PAGOmat 6/2 label dispenser (excellent condition with less than 1000 running hours)
used
automatic baler Manufacturer: PAAL Type: PACOMAT III 50 C Operating hours: approx. 1,750 hours Year of construction: 2014 Specifications: Press force: 485 kN (50 t) Specific pressing force: 6.4 kg/cm² System pressure: 315 bar only free kicks Drive power: 22 kW Total connected load: 92 kW, 175 A Throughput at idle: approx. 285 m³/h Throughput under operating conditions: approx. 125 m³/h Output at 35 kg/m³: approx. 4.4 t/h Capacity at 50 kg/m³: approx. 6.0 t/h Filling opening: 1,200 x 920 mm Duct format: 750 x 1,000 mm (H x W) Oil tank volume: 1,250 ltr. Control: Siemens S7-300 Machine dimensions: approx. 8,000 x 2,000 (4,100) x 2,460 mm (L x W x H) Machine weight: up to approx. 12 t
used
Labeller Manufacturer Pago Model Pagomat 3 contact us for more info
used
max. format 36 x 49 cm Year of construction 2015 Flow wrapping machine Touch screen computer control Insert height up to 120 mm Speed up to 28 m/min (idle) Feed belt without shrink tunnel Delivery date: immediately from stock Price on request. We deliver and install worldwide!
used
Max 75 BAR. Equipped with Simon feed killing IVA 411 S grinder. Please note! Viewing is only possible by appointment! It is not possible to view the lot without an appointment! Picking up this lot is only possible by appointment! The machine will be professionally dismantled and delivered ready for transport. The buyer must arrange his own transport for this lot. Attention: this lot will be available for assignment from August 2024.
used
Max 75 BAR. Equipped with Simon feed killing IVA 411 S grinder. Please note! Viewing is only possible by appointment! It is not possible to view the lot without an appointment! Picking up this lot is only possible by appointment! The machine will be professionally dismantled and delivered ready for transport. The buyer must arrange his own transport for this lot. Attention: this lot will be available for assignment from August 2024.
used
Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1050 mm Year of construction: 2020 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 8.5 tons/hour Theoretical throughput to density 50kg/m3: 11.6 tons/hour
used
Specifications Maximum pressure: 50 tons Power supply: 400 V/ 45kW Bale tying: automatic Press force: 7.14 kg/cm² Dimensions of the tailgate: 620 x 1200 mm Year of construction: 2015 Number of ties: 4 horizontal Duct cross-section: 700 x 1000 mm Bale weight: approx. 500 kg Weight: approx. 8.5 tonen Theoretical throughput to density 35kg/m3: 6.7 tons/hour Theoretical throughput to density 50kg/m3: 9 tons/hour Press capacity: max 190 m³/h
used
Bale dimensions: 800x800mm, length: 8000mm, width: 6000mm, height: 5000mm.
used
Voltage: 100V, connected load: 3kVA, compressed air supply: 80l/min, year of construction unknown, including cartridge heater, the floppy drive is defective, programmes can currently only be imported via RS-232 connection.
used
Voltage: 400V, connected load: 7kVA, compressed air supply: 80l/min, year of construction unknown, with jumper-wire unit and 21 cassettes with four conveyors each, the machine has an electrical defect and will not start.
used
Complete Automatic Line Packaging Trays. Composed by: - Interlocking Cardboard Tray Former Model Vara Year of Construction 1992 - Belt conveyor elevator for multi-head weigher - A304 stainless steel vibrating screen - Linear Multihead Weigher 10 Heads Opem Inox A304 Year of Construction 1992 With Base - A304 Stainless Steel Flow Pack Packaging Line Conveyor Belts - Technopack Flow Pack packaging machine Year of construction 2001 Max Speed 60 Pcs / min. 10.4 Double Coil Automatic Exchange Touch Screen Panel.
used
Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance
used
Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic
used
Complete label dispenser with integrated PLC. Width: 14 - 100 mm Label length: 10 - 999 mm. Device is as good as new and in original packaging. Output: up to 1000 products/Min.
used
Side labeller for flat products (boxes), left-hand model, pneumatically controlled, operating pressure: 4 - 6 bar, (explosion-proof), max. passage width 150 mm, without printing unit, height-adjustable on frame (150 mm).
used
Capacity/h: 6000 P/h Condition: excellent, ready for operation Tetra Pak TBA 8 1000 ml Slim Line Filling Machine with Screw Cap Applicator TCAP 47 consists of: TBA 8 1000 ml Slim Line Filling Machine V100, Pull Tab Applicator PT 8, Tetra Cap Screw Cap Applicator TCAP 47. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.
used
Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 Slim Line 1000 ml Filling Machine with ReCap 2 consists of: TBA 8 1000 ml Slim Line Filling Machine, Pull Tab Applicator PT 10, Tetra Cap Screw Cap Applicator ReCap 2 and Packer TCBP 70. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.
used
Capacity/h: 6000 Pa/h Condition: excellent, ready for operation Tetra Pak TBA 8 LSC 1500 sl Filling Machine with PT 8 and TCAP 47 consists of: Tetra Pak TBA 8 LSC 1500 sl Filling Machine with PT 8 Ascrew cap Applicator TCAP 47, Packer TCBP 70 and Conveyors. To complete an offer we have several machinery and equipment in our stock such as: Tray Shrink Packer, Shrink Packer, TCBP (TetraCardBoardPacker), conveyors, closing systems, etc. By request we take over different Service features including consulting and planning, transportation, assembling and installation. Do not hesitate to contact us for an detailed offer. Prior sales reserved for all offers.
used
Manufacturer: PAMA, Italy Model: AT 130/3 CNC Year of manufacture: 1996 Control: CNC SIEMENS SINUMERIK 828 Condition: Excellent, complete, machine will be equipped with a new CNC control SINUMERIK 828! Location: Machine in our warehouse Rudniki, Poland. Technical details Spindle diameter: ø 130 mm Rotary table: 1600 x 1600 mm Table capacity: 12000 kg X axis travel: 2500 mm Y axis travel: 2400 mm Z axis travel: 750 mm W axis travel: 2030 mm Max spindle speeds: 2200 RPM Main motor Power: 35 KW ATC magazine: 100 pcs Rapid feeds: - X- 10,000 mm/min - Y- 12,000 mm/min - Z- 6,000 mm/min - W – 12,000 mm/min - B – 2 Gear steps 2 ranges Torque in axes: X- 55 Nm; Y- W-B- 37 Nm; Z- 27 Nm Weight: 35 kg Max. tool diameter with all places occupied: 140 Max. tool length: 600 mm Equipment: - 1 psc.Rotary table - ATC for 100 pcs - APC 2 pcs 1600 x 1600 mm - External ...
DIVERSE EQUIPMENT OF BREW HOUSE, BREW VATS, TANKS, FILTER ETC.
used
Filtration unit furbished with 2 PALL 8304 X-length housings For Hydrolic and lube oil filtration Any filterelements available on request
used
Kiener Skinetta Pac-Systeme ASK-300 bundler and stretch wrapper, output up to 32 packs per minute. Maximum reel width 300mm. Maximum final pack dimensions 380mm (W) x 360mm (L) x 290mm (H). Includes stacking unit.
used
Pall Purifier Flow up to 70L/min. Fluid viscosities to 700 cst.
used
Duplex Pall Filter housing Elements: HC 8300 Fxx 39H
used
Optimization cap seed PAUL, type 12 KE Automatic cademaege for saeging pre-programmed fixtures and fault caps after kreid marking Very little going on Top Condition
used
Filtration / cooling unit Furbished with 2 pcs of water coolers and 2 filterhousings PALL 8304 X= Lengths All kind of filterelements available in differnt micron ratings. Ideal to solve both filtration and cooling on various installations using Hydraulic Oil
used
Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for ...