p k used for sale

: neu : ca. 4 Monate ab Auftragse : Italien : 19500 € : 374.4 € : 70 to : fix : 500 mm : 700 mm : 900 mm : 20 mm/s : 2 mm/s : 1700 mm : 1000 mm : 2400 mm : 980 kg 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 31200 € : 595.92 € : 100 to : horizontal verschiebbar : 500 mm : 700 mm : 1550 mm : 25 mm/s : 2 mm/s : 2400 mm : 1200 mm : 2450 mm : 1960 kg HORIZONTAL MOVABLE CYLINDER 1.050 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7700 € : 148.61 € : 100 to : fix : 900 mm : 1050 mm : 1900 mm : 850 mm : 2250 (PSS: 2400) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 100 TL: 1 speed 4 mm/s, single-hand control with lever € 7.700,00 PSS 100 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.400,00 PSS100 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.000,00 PSS 100: same as PSS 100 NC but with stroke 500 mm € 10.500,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 34500 € : 658.95 € : 100 to : fix : 835 mm : 500 mm : 780 mm : 1050 mm : 25 mm/s : 10 mm/s : 4 mm/s : 800 x 600 mm : 700 x 350 mm : 1800 mm : 1000 mm : 2400 mm : 2050 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 9000 € : 173.7 € : 30 to : fix : 350 mm : 920 mm : 900 mm : max. 9 mm/s : 0,75 kW : 1600 mm : 700 mm : 2050 mm : 430 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only ",M", versions) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 49500 € : 945.45 € : 150 to : fix : 835 mm : 500 mm : 700 mm : 1050 mm : 20 mm/s : 10 mm/s : 3 mm/s : 1000x700 mm : 1000x400 mm : 2200 mm : 1000 mm : 2700 mm : 4100 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 11000 € : 211.2 € : 50 to : fix : 350 mm : 900 mm : 900 mm : max. 9 mm/s : 0,75 kW : 1700 mm : 700 mm : 2100 mm : 650 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only ",M", versions) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7306 : prompt, Zwischenverkauf v : Italien : 11800 € : 205.44 € : 1 : 10700 € : 50 to : horizontal verschiebbar : 350 mm : 900 mm : 900 mm : max. 9 mm/s : 0,75 kW : 1700 mm : 700 mm : 2100 mm : 720 kg : 550 mm The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only ",M", versions) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 38000 € : 725.8 € : 100 to : fix : 1250 mm : 500 mm : 780 mm : 1500 mm : 25 mm/s : 10 mm/s : 4 mm/s : 1300x600 mm : 1250x400 mm : 2400 mm : 1200 mm : 2450 mm : 2450 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...

: neu : ca. 4 Monate ab Auftragse : Italien : 132500 € : 2504.25 € : 200 to : 500 mm : 1250x1000 mm : 600 mm : 25 mm/s : 3,5 mm/s : 7.5 kW : 1550 mm : 1300 mm : 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ...

Polar 115 EMC monitor in production ready condition, with extra reserve blades. Available immediately. Can ship worldwide.

- Program - Air table - Standard side table, right - Resopal side table with air , left - R2 Jogger - Spare kife

Material: stainless steel Engine: 22 kW Content: 680 ltr. Vat tiltable. Good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

<br>8 stations 7 investors P 15 Bulletin station Trimmer Trimmer HT 15 Stacker RS 10<br><br>Still in operation: No.<br>Available: immediately

Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 &amp; halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

New machine Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 &amp; halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

PVS 125 H micro cut Inotec drive power 15 KW product performance from 300 kg to 900 kg an hour for various products pesto sauces soups Majnäse and similar

PVS 125 Hi micro-cut Feinstzerkleinerer drive 15 KW Produkleistung 300 to 2000 kg or litres an hour depending on the machine can by the fineness of the products directly at the outlet of cooking equipment or tilting boiling pans are connected

Kneader UC 80 AL with an extendable tray. Basic refurbished dough quantity: approx. 130 kg

1xRESERVE KNIFE FOR POLAR MOHR 66

Thank you for your interest in our used machines, which we are pleased to offer you as follows: Manufacturer: W&P - Werner & Pfleiderer Model: LUK 075 Double Z Laboratory Mixer - double-walled heatable electr. Values: 380 V 50 Hz Agitator speed: 56/37.5 Total capacity: 1.1 liters Net capacity: 0.75 litres Motor power: 0.37 kW Machine dimensions: approx. 670 x 350 x 330 mm Weight: approx. 65 kg Details: parts made of stainless steel that come into contact with the product double-walled heating Comes from laboratory operations at a research institution We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations.

Laboratory kneader Volume: 1 litre Product-contacted areas: stainless steel VA Vacuum-resistant Temperable Subject to prior sale - Errors possible

Material : Stainless steel Mixed roe with double sheath, heatable / coolable Mixing tool : Z-arms Total volume: 3.75 l. Usable volume: 2.5 ltr. Main drive: 0.81 KW, 1400 / 43 rpm Bucket speeds: rear shovel: 25 rpm front shovel: 43 rpm permissible vapour pressure: 5.88 bar;

Dough kneading machine W&P DK 250 with 2 boilers -Double cone kneader type DK 250 -for max. 400 kg dough or 250 kg flour -with base plate

Pleiger Hydromotor for Krauss Maffei MOS 4500-05-2203

Pleiger Hydromotor for Krauss Maffei MO 8000

We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty

W&P Batch Kneader Type: UC 80 A with stainless steel boiler Stainless steel spiral Flour dust cover 2x automatic timers 2x speeds for max. 120 kg dough

Werner Pfleiderer Double Conus Kneader used unfortunately no type plate available, we assume DK65, for which we do not guarantee Machine in condition as returned by the customer, was overhauled according to the previous owner smooth and smooth running, machine automatically switches to the second stage Timer adjustable for 3-30 minutes, head then lifts independently Machine also runs with the head open or can be lifted during operation, this should be corrected before use by means of limit switches The machine must be thoroughly cleaned before use Video about test run and other pictures available

Double cone kneader Werner & Pfleiderer DK 150

Kneader Diosna S 120 Plus Kneading Machine -with 1 timer -with stainless steel boiler and lifting arm -with flour dust cover -2 speeds slow and fast -Machine is mobile on castors with lock -400 volts

Diosna Kneader Type: S35 Plus Stainless steel boiler Stainless steel lifting arm Flour dust cover 1x timer with lock Height: 100cm Width: 70cm Depth: 70cm

--> with discharge screw; Volume : 110 ltr. Drive : 15 KW Drive screw discharge : 7,5 KW Material : Mild steel Weight: 3000 kg Dimensions : L 2.60 m x W 1.60 m x H 1.80 m.

--> Tilting kneader with double jacket Material : wetted areas in stainless steel Volume : 260 ltr. Usable volume: 200 ltr. Dimensions: L 2.60 m x W 1.20 m x H 1.35 m.

--> tilting kneader, with double jacket; Material : wetted areas in stainless steel Volume : 210 ltr. Usable volume: 160 ltr. Dimensions : L 2.40 m x W 1.15 m x H 1.35 m;

Drive : 200 KW Volume : 90 ltr. Usable volume: 63 ltr. Bucket speeds : 45.5 / 41.2 rpm Drive : 200 KW Engine speed : 1500 rpm Weight: ca. 11,5 to Weight gearbox: approx. 2950 kg.

150 Litre kettle. Gas energy / Propan-butan

Diosna D 240a plus with 2 boilers Tipper Diosna HK 166 - after general overhaul

Batch / spiral kneader W&P, type: UC50 AC -overhauled- - including 2 tank cars - for 50 kg flour or 80 kg dough - for mischweizen and mixed rye dough - in bakery condition - very nice condition, immediately ready for use - Video with kneader in function on request Inspection and test run are of course possible at any time by arrangement. The machine has been tested and is ready for immediate use.

- Lifting kneader Diosna S 35 - with stainless steel boiler - for max. 35 kg dough - with 2 speeds - with foot switch - with flour dust cover - Boiler diameter inside: 52cm - Inside boiler height: 35cm

Lifting swaging machine Diosna S 120 Plus A used dough kneader Diosna S 120 for a maximum of 120kg dough, with 2 speeds, slow and fast is for sale and immediately available in our warehouse. Kneader Diosna S 120 - with 1 automatic timer - Machine is revised and repainted - with 2 gears - with stainless steel boiler - with flour dust cover - mobile on wheels with lock

Brand: MATELEC Model: 3 phase ONAN Transformer Power rating: 1000kVA Voltage: 15 - 20kV / 410V Additional info: Dyn 11, 50Hz Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.

Batch mixer dough kneading machine extendable WP UC 80 A Spiral mixer Batch mixer W&P UC 80 A - Manufacturer: Werner & Pfleiderer - Type: UC 80 A - suitable for soft dough - with stainless steel spiral tool - with 2 stainless steel shells - with 2 automatic timers - slow and fast at 2 speeds - with flour dust cover - 380 volts 50 Hz

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Perske -Type: 35DW16/6 -Type: DA16/2 -Input: 380 V 50 Hz -Output: 133 V 200 Hz -Power: 35 KVA -Dimensions: 1000/520/H500 mm -Weight: 450 kg

Lifting mixer Diosna D240 Plus Lifting kneader Diosna D 240 Plus with fixed kesel - with stainless steel boiler - Kettle for a maximum of 240 kg of dough or for a maximum of 150 kg of flour - 2 speeds slow and fast - with flour dust cover - Mobile on castors - 380 volts - Machine completely repainted

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 3 kW -Output: 130 V 200 Hz -Power output: 4 kVA -for edgebanders, edgebanding machines -Weight: 125 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 4.2 kW -Output: 133 V 200 Hz -Power output: 6 kVA -for: Edge bander, edge banding machine -Weight: 115 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 5.5 kW -Output: 133 V 200 Hz -Power: 7.5 kVA -for: Edge bander, edge banding machine -Weight: 105 kg

Metos Proveno CoolPro 80E combi kettle Stainless, 80L, combi kettle, jacketed, 20.75Kw, temp range from 0'C to 120'C, with variable speed agitation, adjustable timer and temperature settings and more, with manual, 3Ph

It is a used, reconditioned Diosna mixer S 120 Plus (for max. 120kg dough / 75kg flour) for sale. The machine is in very good condition and fully functional. The mixer has a stainless steel bowl, stainless steel kneading arm, a flour dust cover, two speeds and is mobile. The machine has a new control system with two timers. A video can be sent on request. Price on request.