p k used for sale

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-400-PPV-A -Piston: Ø 32 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -for: proximity switch -Number: 1x available -Price: per piece -Dimensions: 45/45/H545 mm -Weight: 1.7 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Stroke travel: 100 mm -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Total length: 320 mm -Total length extended: 420 mm -Quantity: 2 available -Price: per piece -Dimensions: 96/96/H320 mm -Weight: 4.35 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-80-25-PPV -Piston: Ø 80 mm -Stroke: 25 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 2x available -Price: per piece -Dimensions: 95/95/H245 mm -Weight: 4 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DKE-40-800-PPV-A -Piston: Ø 40 -Stroke: 800 mm -Pressure: max. 10 bar -integrated clamping unit -PPV Pneumatic cushioning: adjustable on both sides -A for proximity switches -Number: 1x cylinder available -Price: per piece -Weight: 18.7 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Manufacturer: Perske, milling motor type VS 31.09/2 -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Shaft mount: Ø 20 x 10 mm -Number: 3x engines available -Price: per piece -Dimensions: 250/60/H155 mm / 240/60/H140 mm -Weight: 3.4 kg/pc.

Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw Ideal for sawing work even in wet, damp rooms and shafts, wherever electric reciprocating saws are not permitted. -Output power: 1000 W -Steel pipes: up to max. Ø 160 mm -in the suitcase -Number: 4 saws available -Price: per piece -Dimensions: 690/200/H120 mm -Weight: 8 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -2x engines Perske -Motor 1 type: KNS 71.16/201 -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Motor 2 type: MP-10-L -Power: 1.0/1.5 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 3000/6000 rpm -Other engines with other services in stock for an additional charge -Number: 1x joint milling units available -Price: per piece -Dimensions: 900/1000/H1030 mm -Weight: 360 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KCS 70.12-2D -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/600/H1330 mm -Weight: 346 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -2x engines Perske -Motor type: KNS 70 12/2 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Number: 2x premilling units available -Price: per piece -Dimensions: 1120/1100/H1340 mm -Weight: 530 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: illegible -Power: kW -Voltage: volts -Frequency: Hz -Speed: rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/700/H1250 mm -Weight: 354 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KNS 70 12/2 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Number: 2x premilling units available -Price: per piece -Dimensions: 970/600/H1050 mm -Weight: 318 kg

Double end profiler, edge processing machine, flush milling cutter, edge milling cutter, spindle motor, milling motor -1x motor: 1/1.5 kW 2670/5710 rpm at 50/100 Hz -1x motor: 5.5/8 kW 2870/5880 rpm at 50/100 Hz -Motor: mounted on guides -Motors: swiveling -Mill: with inserts -Dimensions: 900/1100/H1000 mm -Weight 274 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit allows you to pre-mill the upper and lower edge overhang -with keying: from 1 side each -1x engines Perske -Power: 1.125 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -1x engines Perske -Power: 1.5 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/340/H600 mm -Weight: 50 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Number: 3x motors available -Price: per piece -Dimensions: 200/85/H70 mm -Weight: 3.3 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Peske, milling motor type VS 31.09-4 -Power: 0.37 kW 8540 rpm at 300 Hz -Voltage: 165 volts -Take-up: collet -Tool: Ø 8 mm -Number: 2x motor available -Price per piece -Dimensions: 260/60/H140 mm / 255/60/H155 -Weight: 3.5 kg/pc.

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Take-up shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -with indexable milling cutter -Number: 1 piece available -Dimensions: 285/60/H170 mm -Weight: 5kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.55 kW 2700 rpm at 50 Hz -Power: 0.95 kW 5360 rpm at 100 Hz -Voltage: 220/380 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 175 mm -Number: 4x engines available -Price: per piece -Dimensions: 430/170/H185 mm -Weight: 15 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Processing unit, automatic drilling machine, drilling machine, floor drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 1.1 kW -Speed: l 2665 rpm -Thread recording -Adjustable drilling distance: 15-65 mm -Number: 2x processing units available -Price: per piece -Weight: 23 kg/piece

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.4 kW 2890 rpm at 50 Hz -Power: 6.6 kW 5880 rpm at 100 Hz -Voltage: 220/380 volts -Mounting shaft: Ø 35 mm -Tool: Ø 240 x 20 mm -Dimensions: 550/270/H150 mm -Weight: 51 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 20 mm -Tool: mm -Number: 3x motors available -Price: per piece -Dimensions: 250/60/H155 mm -Weight: 4.2 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -Number: 3x motors available -Price: per piece -Dimensions: 250/60/H140 mm -Weight: 3.8 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Bahco, hydraulic pump hand pump, two-stage -Type: P2508 -Pressure range: up to 80 Mpa / 800 bar -Oil volume: 2.5 L -Quantity: 6x hand pump available -Price per piece -Dimension: 600/145 / H180 mm -Weight: 14 kg/pc.

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: Bahco, hydraulic hand pump, two-stage -Type: P1008 -Pressure range: up to 80 MPa / 800 bar -Oil volume: 1 L -Number: 12 hand hydraulic pumps available -Price: per piece -Dimensions: 600/120/H190 mm -Weight: 11.3 kg/pc.

Console, fixture, clamping angle, clamping table, clamping plate, support console -Support brackets: 2 pieces, from Promecam STPC 250 40 121 press brake -Extension table: height adjustable -Dimensions each: 1070/300/H760 mm -Transport dimensions: 1150/790/H310 mm -Total weight: 96 kg

Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 2x injection pumps available -Price: per piece -Dimensions: 460/215/H325 mm -Weight: 32 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD PM -Cutting nozzle 6 - 10 mm 5 bar -Cutting range: 6 - 10 mm -Gas: propane methane -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 5 pieces available -Total Cost -Total weight: 0.25kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 D23 Ø 20.0 PTFE VA -Connection: DN20 PN16 -Number: 2x valve available -Price per piece -Dimension: 220/100/H90 mm -Weight: 1.4 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 A 40,0 PTFE VA -Connection: DN40 PN16 -Dimension: 260/103/H250 mm -Weight: 3,3 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-100-700-PPV-A -Lifting stroke: 700 mm -Piston: Ø 100 mm -Piston rod: Ø 25 mm / M20 x 1.5 -Max. Pressure: 10 bars -Dimensions: 925/110/H165 mm -Weight: 12 kg

Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Bush, Timing belt pulley type 1615 40-8M-30-T -Type: P60-5M -Taper clamping bushing: optibelt 1615-25 -Hole: Ø 25 mm -Quantity: 19x toothed discs available -Price: per piece -Dimensions: Ø 106 x 38 mm -Weight: 1.8 kg/pc.

Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 1x controller available -Price per piece -Dimensions: 270/95/H90 mm -Weight: 1.2 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZM4-58 -Number: 2x switches available -Price per piece -Dimensions: 140/55/H165 mm -Weight: 1.1 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-25 -Number: 1x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-1 -Number: 1x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-1 XTPR001BC1 -Number: 1x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-0,63 -Number: 2x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-10 -Number: 2x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, switch disconnectors, disconnectors -Manufacturer: Moeller, motor protection switch -Type: PKZMO-6,3 -Number: 1x switches available -Price per piece -Dimensions: 90/45/H75 mm -Weight: 0,3 kg/pc.

Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe -Manufacturer: Hommel, measuring probe for roughness measuring device -Measuring probe: Type P2FE 30 / P2F E 100 -Individual components: see photos -Box dimensions: 235/105/H30 mm -Weight: 0.4 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Perske, milling motor for edge processing machines -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 15 x 17 mm / M12 -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DVMS 903/2 -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 30 x 32 mm -Tool: Ø 70 x 20 mm / insert milling cutter -Number: 1 piece available -Dimensions: 250/59/H140 mm -Weight: 3.8 kg

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: MGV, power pack power supply -Type: PH1003-2840 -Input: 3 x 320...460V AC -Output: 27.3 VDC /40 A -Number: 2x power supply available -Price per piece -Dimension: 265/160/H125 mm -Weight: 2.5 kg/pc.

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X -Card block: Phoenix Contact SKBI 64/H15- -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, Permaflex - pinch valve -Pinch valve pneumatic -Connection: DN100 -Hole circle: Ø 180 x 18 mm -Quantity: 2x valves available -Price per piece -Dimensions: Ø225 x 280 mm -Weight: 15 kg/piece

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 125 -Hole circle: Ø 210 x 18 mm -Quantity: 5x valves available -Price per piece -Dimensions: 350/270/H250 mm -Weight: 17kg/piece

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 150 -Hole circle: Ø 240 x 23 mm -Quantity: 3x valves available -Price per piece -Dimensions: 420/285/H310 mm -Weight: 46 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KN 71.14/2 with bracket -Power: 3 kW 2880 rpm -Voltage: 380V / 50Hz -Receiving shaft: Ø 30 x 70 mm -Tool: max. Ø 440 mm -Dimensions: 700/570/H480 mm -Weight: 100 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, quick-change tool holder -Turning tool holders: Tool holders 43 pieces -Tool holders: various designs -Inset prism: 110/94 mm -Dimensions: see photos -Sale/Price: complete -Transport dimensions: 1200/800/H200 mm -Weight: 450 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.