p k used for sale

HUNGER Maschinenbau GmbH Press cylinder for a hydraulic metal scrap press / scrap press shear (Metso-Lindemann) fully assembled and ready for installation Piston diameter 260mm Piston rod diameter 210mm Stroke 8910mm Outer diameter of the housing 335 mm Cylinder head diameter 365mm Total length 10,635 mm Working pressure cylinder head 180 bar Working pressure cylinder base 225 bar Test pressure cylinder head 250 bar Test pressure cylinder base 315 bar Maximum pressure force 1195 kN Maximum tensile force 332 kN Medium hydraulic oil ISO VG46 Installation position horizontal

Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Proximity switch: Namur sensor -Type: IT-PB1-NS/K61 -Number: 1x sensor available -Dimensions: Ø 45 x 20 mm -Weight: 0.1 kg

automatic baler Manufacturer: PAAL Type: KONTI 125 Year of Make: 1988 Operating hours: approx. 23660 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Binding: 3-fold vertical Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: approx. 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

1 of used power supply 5 + 12 VDC, Kisters/Vero, Quadrovolt PK120, type 136-46961L, Vin 220-240 VAC +10% -15%, F 47-400 Hz, Pin max 170 W. Also known as KHKS/Kisters part number: 0003192910 / X0003192910 / K0003192910. Was used in 19" rack for KHS H&K filler controls/graphics.

Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg

Currently we offer a: Pramac GSW275V generator set Type: SC251TWAR04 Engine Volvo Type: TAD734 GE Alternator Mecc Alte ECO38 1LN4 Power 275 KVA Year of construction 2022 RPM: 1500 AVR control Hz 50 Weight: 2990 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Vollautomatische Hochleisungsstanze - Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R) Baujahr / Year 2009 - Serial-No. MK00579 Arbeitsbreite / Working width max. 500mm Format / Sizes min. 120 x 105mm Format / Sizes max. 500 x 500mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung per Minute / Mechanical cycles per minute 110 Cycles/min. Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Leistungsaufnahme / Power requirement 4kVA / 3kW Nennstrom / Power 10 A 2 Werkzeuge / 2 tools 3:1 - 550 mm lang Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Key data: 160 KW, 200 kVA

We currently offer: Number 48 Generator set Engine Perkins 1300 Power 200 KVA / 160 KW Year of manufacture 1996 IP 22 Hz 50 AVR Control SX460 Hours: 8654 Metrics: L: 5.00m W: 1.35m H: 2.00m Weight: approx. 4 tons You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 340 KW, 425 kVA

We currently offer: Number 5 P425E generator set Engine Perkins Type: 2006-TTAG Generator S'Star Type: PR 500 H Power 425 KVA / 340 KW V 400/230 Hz 50 RPM 1500 A 613.5 IP 22 AVR Control SX440 Year of manufacture 1996 Hours: 7411 dB 100 Metrics: L: 5.40m H: 2.30m B: 1.65m Weight: approx. 7000 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Reference Num.: 4036 Brand: Konica Minolta Type: Bizhub Pro 951 (black / white) Construction year: 2013 Impressions: 6 mio Available: directly Status: In production Location: Deutschland Equipment: - Scanner - Duplexdruck - Locheinheit - Brosch?renfinisher - Falzeinheit

automatic baler Manufacturer: PAAL Type: KONTI 600 F Year of construction 2009 Operating hours: only approx. 22,000 specifications: Pressing force: 150 t at 300 bar Specific pressing force: 124 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 45 kW Throughput: approx. 375 m³/h Capacity at 35 kg/m³: 13.0 t/h Capacity at 60 kg/m³: 22.5 t/h Capacity at 100 kg/m³: 35.0 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 45 t

- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg

An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible.

for the production of 27,000 bottles per hour. With shape

60T bis 80T per hour capable Find more here - /

2x 1991 Kettner, Palletizing lines Palletising line 1 & 2 manufacturer Kettner company Year of construction 1991 Overhauled 2009 STATUS Palletising line 1 2 Currently in operation, Mechanically regularly maintained and in operation CONTROL Currently in operation, but no more spare parts available on the market (therefore the entire system will be replaced) The system is ready for use again when the control unit is replaced Line 1 Empty pallet magazine Infeed conveyor Loader / palletiser Finished pallets’ conveyor line Line 2 Empty pallet magazine Infeed conveyor Loader / palletiser Conveyor line ‘finished pallets’ Find more here - / Contact us at -

Specifications Maximum pressure: 85 tons Year of Make: 1994 Pressing force: 103 tons/m² Number of ties: 4 - vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Bale weight: 500-650 kg Weight: 26 tons Power connection: 400 V/ 55 kW Bale tying: automatic

Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

500 plastic pallet boxes Used goods, see pictures Manufacturer: Uni-Pak Colour grey/black Dimensions: 1200x800x765mm 500 pieces available. Negotiation price: € 30,- net from stock P10271 Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

approx. 1,500 pieces Pick-by-Light compartment display / modules, – used - : Price per piece from location: only 15.-€ (net)! Ev. If you are interested, the aluminum plug-in rails are also for sale! Manufacturer: KBS Type: PTF-L-6-VAR00 Year of manufacture: unknown Condition: good Available: immediately Location: Lunzenau camp

Description KEBA - DIGITAL OUTPUT MODULE Type: E-16-DIGOUT PLUS D1456E

Description KEBA - DIGITAL OUTPUT MODULE Type: E-16-DIGIOUT PLUS D1456E

1 aseptic filling Krones PET bottle filling line for bottles with a capacity of 1,500 ml, capacity 20,000 pieces/hour Year of construction 2005, No. 564-045 With sterile tank, capacity 7,500 l with sleever machine on the 1st floor above with Krones bottle cap conveyor. with Krones labeller, built in 2005 with various spare parts, but without PET blow bottles technology and without PTT bottles carton packing machine

Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...

automatic baler Manufacturer: PAAL Type: KONTI 425 D Year of Make: 2002 Hours: 58,245 h specifications: Press force: 115 t Specific pressing force: 139.39 N/cm² Drive power: 3 x 45 kW (main pumps) Total connected load: 170 kW Capacity under operating conditions: approx. 475 m³/h Filling opening: 2,000 x 1,020 mm Channel cross-section: 750 x 1,100 mm (H x W) Bale size: 1,100 x 750 mm Binding: 4-fold vertical Weight: approx. 36 t Special equipment of the press: • Reduction of the filling opening due to adjustable pressure plate position • Control Siemens S7 • Automatic cutting edge free kick

automatic baler Manufacturer: PAAL Type: KONTI 125 SO Year of Make: 1990 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

automatic baler Manufacturer: PAAL Type: KONTI 425 C / SO Year of Make: 1995 Operating hours: approx. 36,000 hours specifications: Press force: 100 t Specific pressing force: 121.2 N/cm² Drive power: 2 x 75 kW (main pumps) Total connected load: 171 kW Capacity under operating conditions: approx. 380 m³/h Filling opening: 1,750 x 1,020 mm Channel cross-section: 750 x 1,100 mm (H x W) Bale size: 1,100 x 750 mm Binding: 4-fold vertical Weight: approx. 36 t

automatic baler Manufacturer: PAAL Type: KONTI 600 F/k with cross-binding Year of construction 2008 only 4 years in operation specifications: Press force: 145 t Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 75 kW Throughput capacity:approx. 510 m³/h Capacity at 35 kg/m³: 17.5 t/h Capacity at 60 kg/m³: 30.0 t/h Capacity at 100 kg/m³: 47.0 t/h Binding: 5-fold vertical Additional 4-fold automatic horizontal bonding Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 39 t

Fully automatic baler Manufacturer: PAAL Type KONTI 275 B specifications: Pressing force: 60 t Specific pressing force: 7.30 kg/cm² Drive power: 1 x 37 kW Throughput under operating conditions: 200 m³/h Output at 35 kg/m³ bulk density: approx. 7 t/h Output at 60 kg/m³ bulk density: approx. 12 t/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Machine weight: approx. 21 t Bale weights: up to approx. 600 kg

automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of Make: 2000 Operating hours: approx. 23,575 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 Electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank capacity: 1,250 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE

Clinch unit TOX - Pneumatic-Hydro Tox pressHydro-pneumatic press TOX Pressotechnik POWER PACKAGEType type CRS 03.62No.: 207599.2Year of construction approx. 2005Pressure capacity: max. 80 kN = 8 tonProjection: 20 mmInstallation height: 32 mm- Built-in clinch tool- pneumatic valve for control- Push-through joining or clinching- For making a form-fit connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control and Foot switchWeight: 230 kgComes from

A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading.

A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible.

Height=1.05 m, Overall length= 0.62 m, Overall width= 0.55 m, Net weight= 64 kg,

Bread loaf forming line composed of: -Weigher / divider / girder: For all types of dough (year 2007) Automatic lubrication system. Adjustable weight. from 60 to 600 grs. Speed variator. 40 kg hopper for dough, made of stainless steel and non-stick material. Flour sifter. Digital parts count. -400-basket resting chamber, manufactured in 2004. Adjustable time. -Bread loaf former, made in 2004 tape width: 600mm

Manufacturer: Kaiserpresse Model: PA620/2 Type of Machine : Press Find more here - / Contact us at -

Reference Num.: 4228 Brand: Konica Minolta Type: bizhub PRESS C1100 Construction year: 2018 Available: directly Status: In production Location: Deutschland

Type: PRM600MEG Serial number: 2000 Belt width: 600 mm Power: 3 x 380V, 50Hz, Dimensions: 3300 x 1000 x 1700 mm Weight: 750 kg

Paper cutting machine with 39cm cutting width. cleaned and checked

Qty. 1 Second-hand PET – CSD bottle filling line Mfc.: H+E Maschinenbau, MTA SpA, ABM, Posimat, Sacmi Filling, Bertolaso, JAKU/JB Michiels, KRONES AG, SMI SpA, Robopac SpA Built: 1992 - 2023 Capacity: 6,000 bph Products: CSD - PET Neck finish: PCO 1881 Format available: 0.5 L

NEW, FEM3A, 4.5 t load capacity, with 120 cm long tines, with Manitou attachment, 246 kg dead weight