over used for sale

Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Drive type: Chain overdrive Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in ...

Overhead crane with trolley, overhead crane STAHL ZL-C 125-13,60 E built: 1989 Lifting capacity: 12,500 kg Crane track average: 13,600 mm Track average cat: 1,400 mm Crane travel: 40 / 10 m/min Trolley travel: 20 / 5 m/min Stroke: 5 / 0.8 m/min hook path: approx. 5.8 m with test book and documentation ! dismantled ! used, tested ! Dimensions: mm

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

Manufacturer: Pinomatic, Type: Pinomatic U, Year: 2000, Angular transfer: yes, Work piece width min-max mm: 1300, Roller width in mm: 1300, Dimensions L x W x H mm: 3500x5500, Year :2000

Manufacturer: Koch Winkelübergabe, Type: mit pneimatischem Überschwieber, Year: ca.1998, Working length max mm: 2000, Working widht max mm: 300, Feeding speed min m/min: 5-20, Working hight adjustable mm: yes, Year :ca.1998

Manufacturer: Bargstedt, Type: Winkelübersetzer, Control: no, Angular transfer: yes, Work piece width min-max mm: 1050, Min.-max. workpiece length in mm: 2500, Working length max mm: Länge Rollbahn 5300, Feeding speed max m/min: ca. 10-30, Feeding speed continous adjustable: möglich, Aushebestationen: Rechenaushebung Teilung 150/länge Rechen 2600 mm mm, Roller width in mm: 850, roller diameter mm: 60, Working hight mm: 920, Lift out roll system: Schiene, FREE TEXT: 2 Motore Antrieb Rolle/1 Motor Querübergabe,

Manufacturer: IMA Winkelübergabe mit Riemenaushebung, Year: ca 1998, Control: no, Work piece width min-max mm: 900, Working length max mm: 1900, Feeding speed max m/min: 5-30, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, roller diameter mm: 60, Working hight mm: 930 +- 50, Lift out roll system: für Riemen, Engine power kW: 2 X 0,75, Year :ca 1998

5t load capacity, track width 14,200 mm. Well preserved. Without warranty. Crane can be loaded on open truck freely.

Manufacturer: Mechnika , Year: 2009, Control: Mekanika/Omrom, Work piece width min-max mm: 60-220, Min.-max. workpiece length in mm: 450-2500, Min.-max. workpiece height in mm: 10-40, FREE TEXT: Transporbandlänge ca.4500 mm<CRLF>Übegabestation in Doppelendprofiler, Year :2009

3. Second-hand overhead crane For loading the slabs! Spam: 25 m Capacity: 5 tons Total weight: 32 500 kg

incl. Teflon tapes, tools

Manufacturer: Cefla Winkelübergabe, Year: 2005, Angular transfer: yes, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 350 - 3800, Min.-max. workpiece height in mm: 10-40, Working length max mm: 3900, Feeding speed max m/min: 10, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Roller width in mm: 1400, roller diameter mm: 80, Working hight mm: 900 +/-, Lift out roll system: yes, Engine power kW: 4, Year :2005

Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995

Specifications will follow asap

Demag Mannesmann 6,3 ton x 11 410 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 11 410 mm Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 5 ton x 15 100 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 15 100 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 11 410 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 11 410 mm Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 15 093 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 15 093 mm Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: no radio control Numbre of riggers : double rigger

OMNIFLO overhead Hanging goods conveyor system driven curve aluminum RA2412 Manufacturer: Schöneberger Technical data: Inner radius: 800 mm Outer radius of drive: 1000 mm = 800 mm + 200 mm order drive Minimum length of leading straight section: 300 mm Minimum length of trailing straight section for motor: 600 mm Overall height: 110 mm profile height + Direction of rotation: right, left curves optional Drive type: chain with brushes Conveyor speed: 0.16 m/s Electrical data: Voltage: 3x 380V high voltage Ampere: 1.75 A Power: 0.55 kW Installation: Ceiling suspension with motor support recommended, as shown in the photos Primarily intended for flat transportation. Slight inclines may be possible depending on the length and weight of the trolley convoy Optionally available: Ceiling suspension Angle adjustment Change of direction of rotation (left-hand curve) Extensions with straight section ...

Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.

Previero underwater head cutting system, complete and ready to work on plastic extrusion lines. Brand: Previero For extruder: Ø 130 mm Underwater cutting in stainless steel Main engine: 3 hp (2.2 kW) With 2 water pumps: 2 HP (1.5 kW) each Centrifuge: 1.30 m x Ø 350 mm Centrifugal motor: 5.5 hp (4 kW)

Height from floor to lifting hook: 5 meter Horizontal movement of hoist: 6 meter Kind of: jib crane Capacity: 1500 kg

Demag 3,2 ton x 20 meter

FAS belt conveyor 1090-630-500 RA2426 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 1090 mm Nominal/outer width (NB): 630 mm Belt width (GB): 500 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 1090 Nominal / outside width in mm: 630 Belt width in mm: 500 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpa ...

Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

FAS belt conveyor 850-530-400 RA2427 Manufacturer: FAS Motor: without motor, driven by overdrive Conveyor length (FL): 850 mm Nominal/outer width (NB): 530 mm Belt width (GB): 400 mm Profile height: 170 mm Drive roller: Head drive Optional: supports Side guide Price: plus VAT from central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: gut Conveying length in mm: 850 Nominal / outside width in mm: 530 Belt width in mm: 400 Driven: Übertrieb scope of delivery: ohne Motor, without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartn ...

Transnorm roller conveyor Chain overdrive 2515-670-620 RA1870 Make: Transnorm Roller width (RB): 620 mm Nominal/outer width (NB): 670 mm Length: 2515mm Diameter rollers: 50 mm Distance between rollers: 80 mm Frame height: 120 Roller conveyor motor: SEW drive motor with frequency converter Conveyor speed: freely adjustable with frequency converter Can be shortened in 80 mm steps Additional roller conveyors can be connected via the chain drive and driven by a motor. Optionally available: Supports Side guide one and both sides Features: condition: good (used) angle: 0° nominal voltage: 380-500V Conveying length in mm: alle 80 mm kürzbar, 2515, 5030, 7545, 10060 Nominal / outside width in mm: 670 Roll width in mm: 620 Roll division in mm: 80 Driven: YES Engine type: SEW Movi-Mot Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides, including Movimot ...

Overhead cut to the water - For extruder Ø 120 mm - Brand: PRT -Production. 500 to 700 kg/h - With stainless steel centrifuge - With electrical panel

Group: 2M Kind of: hoist Capacity: 16 ton Drop: 8 meter

Overhead Crane: - Brand: ESQUIVEL - Model No.: EB305-2/1 MEK10 - 1 TN. - Length: 7.5 meters, Height: 4.5 meters - Year: 2007

Demag Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

Abus Jib crane 3 meter / 500 kg

Abus Jib crane 2.5 meter / 250 kg

Demag Jib crane 2 meter / 250 kg

Abus Jib crane 3 meter / 250 kg

2 KEER OP VOORRAAD Capacity: 250 kg

2 keer op voorraad nbsp; + geleiding Capacity: 125 kg

Demag hoist DCS PRO 10-1000 1 TON

Power: 7,8 kW - Amperage: 52 A. - Voltage: 150 V. - 100% ED Magnet L x W: 1.780 x 1.380mm - Conveyor belt: 1.400mm - AA.: Ca. 2.800mm - With Transformer Rectifier of 380V. Primary - Overband Separator will be overhauled, sandblasted and painted

Magnet L x W x H: 1.075 x 1.710 x 353mm. - Belt: 1.800mm. (new) - AA.: Ca. 1.850mm. - Weight: 3.280 kg.

Magnet L x W x H: 1.526 x 750 x 305mm. - Belt: 800mm. - AA.: Ca. 2.450mm. - Weight: 1.800 KG.

Magnet L x W x H: (1.450 + 650=) 2.100 x 1.200 x 410mm. (130mm. Transportmagnet) - Belt: 1.200mm. - AA.: Ca. 2.850mm.

OVERHAULED - Power: 10,9 / 7,2 kW - Amperage: 49,3 / 32,5A - Voltage: 220V. DC - L x W: 1.600 x 1.300 mm - Conveyor belt: 1.400 mm - AA.: 2.530 mm - With Transformator rectifier from 380V. AC to 220V. DC - Overband separator is sandblasted and painted.

Power: 56,1 kW - Amperage: 173 A - Voltage: 300V. DC - 100% ED Magnet L x W: (1.800 + 2 x 450=) 2.700 x 1.600 mm - Conveyor belt: 1.600 mm - AA.: Ca. 4.500 mm

Power: 14 kW - Amperage: 63,58 A - Voltage: 220V. DC - 100% ED Magnet L x W: (1.400 + 2 x 420=) 2.240 x 1.360 mm - Conveyor belt: 1.400 mm - AA.: Ca. 2.900 mm - With Transformer rectifier of 380V. Primary

Magnet L x W X H: (1.200 + 1.200=) 2.400 x 1.200 x 400mm. (130mm. Transportmagnet) . Belt: 1.400mm. - AA.: Ca. 3.050mm. - Weight: 4.850KG

Magnet L x W x H: 1.270 x 530 x 240mm. - Belt: 700mm. - AA.: Ca. 1.700mm. - With new E.motor