129,386 used machines on RESALE, but how to find them? Machine Search
- Overflow MWM 12325735 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and ...
overbelt magnet ferrous separator magnet dimensions 1040 x 530 x 256 mm overall dimensions 2190 x 1214 x 635 mm total weight approx. 1020 kg motor 1,5 kW
Laminator - paper overboard Tùnkers Model S-1450 Year 1997 Working width 1450 mm Substrate Feeder automatic suction feeder Laminate Feeder by hand Details with pressing roll Delivery delivery on a table Condition can be purchased `as-is`or refurbished on most parts (ask details) Available Direct or very soon
IMA OVERWRAPPING MACHINE, MODEL BFB DIVISION 3711 Year of construction: 2016 Production reaches 110 cycles/min handling somewhat larger sized products. Changeover procedures are fast and easy, to avoid unwanted downtime. High quality individual or multiple over wrapping for regular product Complete with a device to lift the film-driving rollers during product elevation These machines enable the use of extremely thin films and avoid the film sliding around the product, thus obtaining the perfect over wrapping finish The equipment uses standard Siemens electrical components and a Siemens PLC. The steel frame is oil-tight and lubrication is by means of oil bath. TECHNICAL SPECIFICATIONS Electrical frequency: Hz 50 Operating voltage: Volt 380 Air pressure: bar 6 DIMENSIONS Net weight: Kg 1500 Length approx.: mm 6400 Width approx.: mm 1735 Height approx.: mm ...
weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: 3220 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fully automatic storage system for containers – in excellent condition: Knapp Shuttle System OSR35 - installed 2016 Available from 2023, incl. 200 meters of conveyor technology, flow racks, Nerak lifts, picking stations Capacity: 7,000 containers 60x40x17cm, expandable up to 9,450 pieces. This OSR shuttle system from Knapp Fördertechnik could increase your performance enormously and reduce costs Performance: More than 500 picks/hour possible General information: The system has 2 aisles with a length of 23.5 meters (shelf length) for over 7,000 containers.An expansion up to 9,420 containers is possible. Additional information: Dimensions of the shuttle construction: Length: 32 m Dimensions of the shelf Length: 23.5 m Width: 7.5 m Height: 9.4 m Sizes of containers: Blue containers for picked goods: 60×40x35cm Green containers for storage: 60x40x ...
We offer formwork Peri Trio 270 x 120, 14 pieces with a 65% discount on a new value of €1,786.00/pc = special net price €625.10/pc. Frame top used condition, cleaned, primed and painted with zinc phosphate coating. The formwork is completely overhauled, with top used original Peri Finply formlining, checked and sorted. Sold individually, subject to sale! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Demag 250 kg crane system Payload: 250 kg Control GSA Type 4 Drive: Side: 3m Forward 2m Crane system has already been dismantled. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
A total of 4 pieces of overseas containers 20 feet good general condition Weight approx. 2500 kg each without content various versions (see pictures) Net price from 3.000 € / piece
OVERWRAPPING MACHINE SOLLAS 19 Mobile automatic overwrapping machine, designed for precise single wrapping of folding cartons in the cosmetics sector. SIEMENS, Simatic S7-300 PLC. With linear infeed conveyor, 2 format sets and spare parts. Built in 2004. PRODUCTION - Machine speed: 50 cycles per minute max. (depending on setup, product, feed system, film type) Processable materials: PP, PE, and coated paper Package dimensions - Width (W): min. 40 mm; max. 200 mm - Length (L): min. 45 mm; max. 300 mm - Height (H): min. 16 mm; max. 140 mm Film roll dimensions - Outer diameter: 320 mm - Maximum roll width: min. 50 mm; max. 425 mm - Inner diameter: 45-80 mm - Film cut length: min. 110 mm; max. 590 mm SIZE - Dimensions: 3700 x 1800 x 2000 mm (ca) - Weight: 1200 kg (ca) ENERGY CONSUMPTION - Power supply: 230/400V - 3 phases + neutral 50/60Hz - Con ...
TECHNICAL SPECIFICATIONS Manufacturer: HANS FEHR Kranbau Designation: Overhead crane, single-girder overhead travelling crane Type: 5.0 t Year of construction: 1979 Payload: 5,000 kg Hook path: 7.0 m Lifting speed: approx. 8 m/min Stroke speed. at fine stroke: approx. 0.8 m/min Total crane length: 11,300 mm
Machine can be used as stretch bander with shrink tunnel and as full wrapping machine with side folding/sealing. • Output max. 22 packs/min., depending on the format • Straight infeed • 2 infeeds: For cartons and bottles • Sealing width max. 440 mm • Insertion length 60-360 mm • Insertion width 60-200 mm • Insertion height 30-165mm • Packing material PE/PP • Film width max. 345 mm • Format change approx. 15 min. • Stacking device • Shrink tunnel Skinettatherm with 2 blowers, 20-600°C • Outfeed conveyor after shrink tunnel 1,200 x 380 mm • PLC Siemens S7-300, touch screen Siemens Simatic TP27 • Drive 400V/50Hz
Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor, overvoltage protection switch -Manufacturer: Weidmüller, surge protection switch -Type: PU 1+1 C Class II -Number: 6 pieces available -Price: per piece -Dimensions: 90/35/H60 mm -Weight: 0.2 kg/piece
Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.
Control unit for overpressure encapsulation system -Number: 1x available -Price: per piece -Dimensions: 270/160/H90 mm -Weight: 1.4 kg
Overload safety clutch, overload protection -Manufacturer: Mayr -Type: 800 N -Admission: M16 -Dimensions: 300/110/H50 mm -Weight: 2.3 kg
Container conveyor system Knapp Over 650 meters Knapp conveyor system with 57 and 65 cm width, many special components, year of construction 2010 This very well-maintained conveyor system from Knapp serves 6 packing stations and 6 picking stations and offers the possibility of putting together any desired system of similar size. The components are diverse: • Pressure-free roller conveyors with pneumatics • Over 15 roller conveyor curves with flat belt and round belt drive • Some routes are suitable for transverse transport (conveyor width over 60 cm) • 2 Nerak conveyors with a lifting height of over 10 metres • Over 20 belt converters • Belt conveyors of various lengths • Packing tables and scales General conditions The system can be dismantled by the buyer. Or we offer dismantling. The system can be reconfigured together with us. The combinat ...
Residual current circuit breaker (RCCB), motor protection switch, reversing switch -Type: multi-STOTZ F272/6 Price: per piece Quantity: 25 available -Weight: 0.5 kg
Overhead crane : 5 TN, length: 9.2 m, brand: Azpeitia Hermanos. MF-0097 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite ...
Permanent Overbelt Magnetic Separator TYPE DMPM1200 1.800 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite ...
Laminator - paper over board Make Tùnkers Model S-1100 Year 2002 Workingwidth 1100 mm Substrate Feeder automatic suction feeder Details with pressing roll & pressing belt, spot label, vacuum belt, pressing belt Delivery delivery on a table OPTIONS we can deliver the machine with spot label functionn OR with lamination station, OR both, and even with a second glue station for triplle layer Condition can be purchaased `as-is`or refurbished on most parts (ask details) Available Direct or very soon
540/1000 rpm, Auction-ID: A1-40132-80
PESTER SHRINK-OVERWRAPPING MACHINE WITH HEAT-SHRINK TUNNEL, MODELS PEWO-PACK 250 COMPACT + PEWO-THERM III 450E Year of construction: 2007 The machine applies heat-shrink film (film material: polyethylene) around each package for packaging. Safety is ensured by locking devices. The parameters for products and format changes are stored, and are easily repeatable. COMPOSED OF PEWO-PACK 250 COMPACT WRAPPING MACHINE Year of construction: 2007 compact and ergonomic machine with cantilever design state-of-the-art sealing technology for secure packages patented splicer for fully automatic film reel change, without machine downtime PRODUCTION FEATURES Production: up to 60 packages/min. Min. format folding boxes: 30 x 15 x 60 mm [l x w x h] packages: 60 x 30 x 60 mm [L x W x H] Max. format folding boxes: 150 x 90 x 180 mm [l x w x h] packages: 360 x 180 x 25 ...
PESTER OVERWRAPPING MACHINE, MODEL PEWO-FOLD 1 COMPACT Features: In-feed conveyor Stacking Device (Stacking Stroke) Out-feed Conveyor with 90° curve Additional Out-feed Conveyor, 90° to the Machine Can also be used as a Banding Machine Control System: PLC: SCHNEIDER Type: Pac Drive LMC Performance: Output: 60 bundles/min
weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 38Hubwerk DemagAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Overcurrent relay, thermal relay, three-pole EAW IR 1/1 ( IR11) TGL 29381 0.4 - 0.68 A 660 V AC for mounting on power contactors ! used, tested ! Dimensions: 60 x 65 x 85 mm
Overcurrent relay, thermal relay, three-pole EAW IR 1W TGL 29381 1.0 - 1.7 A 660 V AC for mounting on contactors ! used, tested ! Dimensions: 60 x 65 x 85 mm
Overcurrent relays, thermal relays, three-pole EAW IR 1W TGL 29381 2.5 - 4.2 A 660 V AC for mounting on power contactors ! used ! Dimensions: 60 x 65 x 85 mm
Overcurrent relay, thermal relay, single-pole EAW ERB2 TGL 29381 100 - 160 A 660 V AC used ! Dimensions: 125 x 45 x 120 mm
closing pressure:6600 kN weight of the machine ca.:45,5 t
Overcurrent relay, thermal relay, three-pole EAW IR 1/1 ( IR11 ) TGL 29381 6.4 - 10.5 A 660 V AC for mounting on power contactors ! used, tested ! Dimensions: 60 x 65 x 85 mm
Overcurrent relays, thermal relays, three-pole EAW 4R TGL 29381 25 - 80 A 500 V AC for mounting on power contactors ! used, tested ! Dimensions: 110 x 65 x 105 mm
Overcurrent relays, motor protection relays, thermal relays, three-pole SCHIELE SRS 25 ( SRS25 ) Rated current: 4 A 50 Hz Response value: 10 A 50 Hz 660 V AC used ! Dimensions: 95 x 55 x 90 mm
Overcurrent relay, thermal relay, three-pole EAW IR 1/1 ( IR1/1 ) TGL 29381 1.6 - 2.7 A 660 V AC for mounting on power contactors ! New ! Dimensions: 65 x 55 x 85 mm
Power contactor with overcurrent relay EAW Contactor: ID 1 TGL 28973 12,5 kW 660 V AC 16 A Us: 220 V AC overcurrent relay: IR 1/1 TGL 29381 4.0 - 6.6 A 660 V AC used, tested ! Dimensions: 125 x 68 x 108 mm
Overload Relay SIEMENS 3UA6600-3D 200 - 300 A used, tested ! Dimensions: 220 x 180 x 150 mm
Contactor with overcurrent relay EAW Contactor: ID 1 TGL 28973 16,00 6 kW 660 V AC 25 A Us: 220 V AC auxiliary switches: 2 NCs, 2 NO contacts Overcurrent relay: IR 1/1 TGL 29381 0.4 - 0.68 A 660 V AC used, tested ! Dimensions: 125 x 68 x 108 mm
Contactor with overcurrent relay EAW Contactor: ID 1 TGL 28973 16,000 6 kW 660 V AC 25 A Us: 220 V AC auxiliary switches: 2 NCs, 2 NO contacts Overcurrent relay: TSA 10 0.67 - 1.0 A 660 V AC used, tested ! Dimensions: 120 x 68 x 108 mm
overload relay SIEMENS 3UA6 3UA6001-2W 63 - 90 A 400 V used, tested ! Dimensions: 105 x 105 x 150 mm
Contactor with overcurrent relay and auxiliary contactor EAW Contactor: LX 1 TGL 28973 11 kW 660 V AC 30 A Us: 110 V AC Auxiliary switches: 2 N.C., 2 N.O Overcurrent relay: TSA 10 0.27 - 0.4 A 660 V AC New ! Dimensions: 155 x 60 x 120 mm
Phase Failure Sensitivity Overload Relay SIEMENS 3UA5800-2C 16 - 25 A 660 V New ! Dimensions: 95 x 80 x 140 mm
Contactor with overcurrent relay and auxiliary contactor EAW Contactor: LX 1 TGL 28973 11 kW 660 V AC 30 A Us: 110 V AC auxiliary switches: 2 NCs, 2 NO contacts Overcurrent relays: TSA 10 7.3 - 11.0 A 660 V AC New ! Dimensions: 155 x 60 x 120 mm
maximum number of results exceeded
please refine your search
10 € 
