oven bakery used for sale

Mini spiral oven, Type: SSOC-15.75-1.6-16T-A-G, Serial number: SPOV-3SC09, Year of construction: 2019, Model: North - South, Execution: Right hand execution, Tiers: 16 pieces, Product gap: 55 mm, Belt width: 400 mm, Heating: natural gas, 352 kW, Gas pressure: 138 - 480 mBar, Temperature: max 232 °C, Steam: 270 - 680 kg/h, Power: 3 x 380V, 50Hz, 46A, Dimensions: 6750 x 2600 x 4000 mm, Including belt washer and CIP system, Mini spiral freezer, Type: SSF-16-1.6-12T-GLYC, Serial number: SPFZ-S01, Year of construction: 2013, Model: North - South, top-down, Belt width: 400 mm, Tiers: 12 pieces, Product gap: 105 mm, Refrigerant: Glycol, Cooling power: 70kW, Steam: 113 kg/h (CIP), Water: 227L/cycle (CIP), Power: 3 x 380V, 50Hz, 57A, Dimensions: 5400 x 2600 x 3150 mm, Including CIP system

A WMU projection brazing furnace, originally built in 1997, but completely refurbished and overhauled in 2017, is available. Heated length: 3750mm, max. operating temperature: 1150°C, heating zones: 4, heating elements: CRFeAl grade, heating capacity: 94kW, usable width: 400mm, usable height: 200mm, throughput: approx. 200kg/h, speed min./max.: 100mm/400mm/min, overall system dimensions X/Y/Z: approx. 19600mm/1900mm/3000mm, control system: PLC. Including an additional muffle, heating elements, conveyor belt and cooling segments. Documentation available. An on-site inspection is possible.

BINDER KB-53 incubator/refrigerated oven with forced convection 100°C Model: KB53 refrigerated and ventilated Capacity: 53 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 1 shelf Cable routing: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Interior dimensions: 40 x 40 x 33 cm Overall dimensions: 64 x 84 x 58 cm Weight: 72 kg Year of manufacture: 2005 Tested at 37°C and -5°C

-Electric deck oven -Manufacturer: Quail - Control: Master -5 shelves each 80cm wide and 120cm deep -Total baking surface 4.8sqm -each floor with separate control -Each floor can be controlled separately with top and bottom heat -each floor with steam function -with exhaust hood -Year of construction: 2015

EKU C9F-6GS 6 Burner Natural Gas Stove Hob (gas burner) Number of burners: 6 stand-alone gas burners. Burner configuration: Divided into two performance classes for flexible pot sizes: 3 x small/medium-sized burners: 3.5 kW each (burner head Ø approx. 80 mm) 3 x large power burners: 6.0 kW each (burner head Ø approx. 110/120 mm) Total power hob: 28.5 kW gas output. Equipment: Cast-iron pot supports (slide shelf) and thermoelectric ignition fuse on each flame for maximum operational safety. Oven (undercounter)Type: Gas-powered large-capacity oven (statically heated) with piezoelectric ignition. Oven power: approx. 8.0 kW to 9.0 kW burner power. Inner dimensions: Suitable for Gastronorm grates and trays (GN 2/1). Temperature range: Adjustable from 100 °C to 300 °C via a safety gas thermostat. Connected loads Total connected load (gas): approx. 36.5 kW to 37.5 kW (sum  ...

Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen

Complete break room furniture set including 8 chairs, 2 tables and 2 microwave ovens. This lot is ideal for setting up a dining area in a professional environment, including: Mechanical workshop Industrial company Car Garage Office or technical room The chairs offer a simple and sturdy seat, while the tables can accommodate several people. The two microwaves allow for quick reheating of meals for multiple users. Complete and economical solution to equip a break room or a relaxation area in a company. Auction-ID: A1-48554-17

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

stainless steel; 6 levels euro bakery standard size 600x400 mm; touch button operation; digital display; including stainless steel open shelf base cabinet 2x 7 GN 1/1 levels; 9.5 kW; Auction-ID: A1-49547-15

Hot Box Tunnel Oven Variable temperature control 0-200deg.C Used for extrusion, currently used for Neoprene, EPDM, and Nitrile tube This is totally unique and does the job of a 25m long in 6m footprint.

Used rack oven W&P, type: Green REC 1280 -In very good bakery condition- - for tin trolleys 60 x 100 cm - with gas or oil burner - Rack trolley with 21 supports (12.6m²) - El. Connection: 400 V, 50 Hz, 9 A - Dimensions: W 1,740 x H 2,400 D 1,900 mm - Max. weight turntable: 350 kg - Very good condition, technically everything checked Visits and test runs are possible by arrangement.

Paint drying oven from Thermo Scientific with a usable volume of 120 litres and a maximum operating temperature of 250 °C. The unit is designed for drying and curing paints, coatings and synthetic resins in the industrial and laboratory sectors. The cabinet has an exhaust air connection and complies with temperature protection class 2 in accordance with DIN 12880.The unit is used and shows normal signs of use in the interior. The housing is in good condition without significant damage. Scope of delivery: 1 Thermo Scientific LUT 6050 paint drying oven Connection cable Without accessories or installations Type: LUT 6050 Year of construction: 2018 Order no.: 50049643 Factory number: 42383627 Max. temperature: 250 °C Usable volume (steam room): 120 l Power: 3.2 kW Connection: 1N/PE 230 V / 50 Hz / 14.4 A Protection class: IP 22 Temperature protection: DIN 12880, class 2 Exhau ...

Machine name: POLIN BELT OVEN Type and model: POLIN 8.8MP Date of manufacture: UNKNOWN Manufacturer: POLIN ITALY Country of origin: General description: TUNNEL OVEN with continuous baking, metal mesh belt with traction chain on the edge. Total baking surface is 8.8 MP, total oven length 11900 mm, total width 1500mm, height 2600mm, belt working width 880 Equipment: .Electrical control panel,.Riello gas burner, variable speed converter, belt, oven temperature probe, electronic temperature regulator dimensions: 11900 x 1500 x 2600 mm Auction-ID: A7-49933-14

Name of the machine: POLIN BELT OVEN Type and model: POLIN 15.5MP Date of manufacture: UNKNOWN 5. Manufacturer: POLIN ITALIA Country of origin: Italy General description: TUNNEL OVEN with continuous baking, metal mesh belt with traction chain on the edge. Total baking surface is 15.5 MP, total oven length 15000 mm, total width 2280mm, height 2900mm, working width of the belt 1120mm Equipment: .Electrical control panel,.Riello gas burner, Variable speed converter belt, oven temperature probe 2 pcs, electronic temperature regulator 2 pcs Dimensions 15000 x 2280 x 2900 mm Auction-ID: A7-49933-15

Table model; stainless steel; 3 levels bakery standard baking trays size 600x400 mm; timer; 230 - 415 Volts; 6.1 kW; Auction-ID: A1-49547-9

Infrared Reflow Oven THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-257

THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-183

Year of manufacture : 2025 ; This lot has not been tested for functionality. The seller does not assume any warranty for the condition and functionality of the lot; Auction-ID: A1-49920-2

AMANN GIRRBACH - 178380 Ceramill Therm 3 The Ceramill Therm 3 high-temperature oven gives you considerable space to achieve the final hardness and obtain a material with exceptional properties Auction-ID: A1-49756-262

Industrial multi-chamber hot-air heating/reactivation oven, attributed to HIDRAGRUP S.L., configured with 4 separate heating chambers (No. 1–4). Each chamber is fitted with an individual hinged access door, perforated metal product tray/basket and separate status/control buttons. The machine has a large upper extraction hood with exhaust connection and is installed on a mobile steel frame with castors. Control equipment includes a Siemens SIMATIC OP3 operator panel, digital temperature controller, emergency stop and individual chamber controls. Offered in its current condition as pictured. Auction-ID: A7-50083-33

inv 5694 - Oven Manufacturer: Firlabo Model: FI 127B Year: 1991 Internal dimensions (W x D x H): 470 x 490 x 510 mm Overall dimensions (W x D x H): 610 x 610 x 700 mm Weight: 60 kg Auction-ID: A1-49706-111

Industrial hot-air heating and reactivation oven, manufactured by HIDRAGRUP S.L., year of manufacture 2005. Designed as a multi-chamber heating system, apparently for controlled heating/reactivation of components or materials in an industrial production process. The machine features three individually controlled heating boxes/chambers (Box 1–3) with perforated metal product trays, hinged insulated access doors and individual timers/controls. Heating and airflow equipment includes multiple Leister industrial hot-air blowers/heaters, ducting and extraction/ventilation components. A separate electrical control cabinet is fitted with a Siemens SIMATIC OP3 operator panel, Omron temperature controllers, main isolator and emergency stop. Offered in its current condition as pictured. Auction-ID: A7-50083-32

The Programat EP 3000 is a modern combi kiln developed by Ivoclar Vivadent for the pressing and firing of dental ceramic materials. Auction-ID: A1-49756-224

inv 7027 : Oven Manufacturer: Memmert Model: V0 200 Overall dimensions (W x D x H): 550 x 500 x 600 mm Usable dimensions (W x D x H): 390 x 240 x 310 mm Number of shelves: 2 Weight: 80 kg Minimum / maximum temperature rating: 20 °C / 200 °C CE compliant Incoterm: FCA Auction-ID: A1-49706-231

GOOD CONDITION GOOD WORKING Auction-ID: A1-49756-105

The Programat CS2 oven is ideal for baking and crystallizing dental products Auction-ID: A1-49756-54

Description Item # 9383 – ROLLED WAFER STICK OVEN Manufactured by HAAS Model EWB-R 2,2/4 GA Year 2016 Natural Gas Fired 150kw Heating Capacity 3 x 400Volts, 50Hz Can produce Single or Twin Colour Wafer Tubes Also can produce with cream fillings Wafer Tube Sizes : Inner diameter: 7 mm Outer diameter: approx. 11,0 mm (depending on winding pitch) Length: approx. 60-113mms, Weight: 5-9 g Approx. 56kg/hour, the exact output depends on recipe

Description Item # 9384 – ROLLED WAFER STICK OVEN Manufactured by HAAS Year 2011 Model EWB 22 Electric Heated 400Volts, 50Hz Can produce Single or Twin Colour Wafer Tubes Also can produce with cream fillings Wafer Tube Sizes : Inner diameter: 7 mm Outer diameter: approx. 11,0 mm (depending on winding pitch) Length: approx. 60-113mms, Weight: 5-9 g Approx. 56kg/hour, the exact output depends on recipe

The products have not been tested for functionality. They may have scratches, dents, incompleteness or general signs of use. Visit us on the day of the inspection to get an accurate picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-50209-569

The products have not been tested for functionality. They may have scratches, dents, incompleteness or general signs of use. Visit us on the day of the inspection to get an accurate picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-50209-750

The products have not been tested for functionality. They may have scratches, dents, incompleteness or general signs of use. Visit us on the day of the inspection to get an accurate picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-50209-752

Offered is a CalmDo hot air fryer - oven Estimated value of goods: 200€ Shipping within Germany possible - direct settlement with the seller. Only bid if you have sufficient financial means, a bid is binding. Auction-ID: A7-50213-357

The products have not been tested for functionality. They may have scratches, dents, incompleteness or general signs of use. Visit us on the day of the inspection to get an accurate picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-50209-574

The products have not been tested for functionality. They may have scratches, dents, incompleteness or general signs of use. Visit us on the day of the inspection to get an accurate picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-50209-305

degree:900 working heigth:100 mm width:4 x 330 mm dimensions of the machine ca.:20,4 x 3,5 x 2,5 m GENERAL INFORMATION ?Electrically heated roller kiln Mod. TR 18/4x33/10-E 90 ?Condition: as new. Price as new 1,2 Mio. ?. ?Offer for immediate sale There are many different areas of application (e.g. burning in metal, roof tiles, etc.). SPECIFICATIONS The kiln is an electrically heated roller kiln. The product is mechanically transported through the kiln on a roller conveyor. The kiln is designed in such a way that no special foundation is required. The usual concreted, screededflat hall floor is sufficient. The dimensions of the sections of the plant, which consists of heating, sintering and cooling zones, are adapted to the requirements of the temperature curve. Temperatures and pressures in the kiln are controlled automatically. The kiln casings are modular. Each housing is lined with di ...