oven alu used for sale

Offered are two identical, belt-driven, sound-insulated Alup screw compressors. Power: 7.5kW, operating pressure: 10bar, capacity: 1m³/min, weight: approx. 215kg. An on-site inspection is possible.

For sale is a robust and reliable industrial refrigeration dryer from the German quality manufacturer ALUP Kompressoren (model Oekodry DT 260). The device effectively removes moisture from the compressed air and thus protects downstream tools and machines. Technical data (according to nameplate): Manufacturer: ALUP-Kompressoren GmbH Model / Type: Oekodry DT 260 Year of Make: 1998 Permissible operating pressure compressed air: max. 16 bar Permissible compressed air temperature: max. 60 °C Operating voltage: 230 V (1 phase / 50 Hz, normal Schuko plug) Nominal consumption: 0.67 kW Refrigerant: R 134a (0.750 kg capacity) Equipment: Integrated automatic steam trap at the bottom of the front Condition & Use: Visually normal workshop condition with usual signs of use. Compact design, is currently ready for transport on pallet.

Throughput: 5000bottles/h, format parts: 0.75l bottles, an on-site inspection is possible.

piston compressor ALUP Flow rate 665 L/min CW 5,5 Pressure 10 bar Container capacity 350 litres

Separation system oil, water Separation system for compressors condensate 2 x Automatic water separator 230 V

Air dryer ALUP 16/30 bar 230 V 16 A R 134a Unchecked

Grain dryer made of ALU two-column MDB-T 2/9, indirect air heater 2500 KW, heating oil, 2 circulating air fan, exhaust air, dedusted, Weishaupt, trapezoidal cladding Tel. 01715213204

Stela drying plant, type MDB-T 1/ 10, aluminum, grain, corn, soy etc. 2 storage containers 2 exhaust fans with 37 KW 2 centro separators Gas burner type Maxon Dismantled for sale immediately. Tel. 01715213204

Manual hand unit: Ja J/N Automatic for single pieces: J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual hand unit: J/N Automatic for single pieces: Ja J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Compressor with tank ALUP HL5000-z10/2M 10 bar 276 m3/h Operating hours: 17854 Tank: 2500 l 2 ALUP single compressors HL 3050-Z488 Motor: 2 x 15 kW used, tested ! Dimensions: 3500 x 1200 x 1900 mm

ALUKAP350 machine, manufactured in 2012 by K.SCHULTEN GMBH from Germany. The 2012 K. Schulten GmbH AluKap350 is a specialized industrial machine produced by K. Schulten GmbH, a German manufacturer known for its expertise in producing machinery and components for industrial applications, particularly in aluminum processing. The AluKap350 is typically associated with aluminum profile cutting and processing. Machines like this are designed to handle precision cutting and processing of aluminum parts, which are widely used in industries such as construction, automotive, and manufacturing. The model number, 350, might refer to specific technical characteristics, such as the cutting capacity, blade size, or processing capabilities. Key features of a machine like the AluKap350 could include: Precision Cutting: The ability to cut aluminum profiles accurately and efficiently. High Throughput ...

Metalworking machine Circular saw cutting line MACO VK370, model VK AR ALU. Manufacturing year 2013. This is a fully automatic saw with a +/-45 degree rotating blade. It has been in production work about 3-4 years. Find more here - .ucymachines/ Contact us at - sales@ucymachines

table length: 1200 mm table width: 700 mm table height: 900 mm table load capacity: 250 Kg weight of the machine ca.: 36 Kg dimensions: 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket - Frame made of aluminum profiles - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. - For clamping: Manual clamping bolt 160514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Alup, Type: Allegro 24, Year: 2003, Schraubenkompressor: yes, Operating hours: 39280, Running idle houres: 4909, Verdichtungsenddruck bar 1: 5 - 13, Hauptläuferdrehzahl U/min 1: 2700, Antriebsleistung kW 1: 24, Volumenstrom m³/min 1: 0,76 - 3,91, Year :2003

saw blade diameter: 130 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm capacity 90 degrees: flat: 180 x 100 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: flat: 120 x 100 mm engine: 3,3 / 4,4 KW 0: 1400 / 2800 U/min weight of the machine ca.: 1060 kg dimensions: 2,5 x 1,8 x 1,85 m TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis 60° links auszuführen. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OMNIFLO overhead Hanging goods conveyor system driven curve aluminum RA2412 Manufacturer: Schöneberger Technical data: Inner radius: 800 mm Outer radius of drive: 1000 mm = 800 mm + 200 mm order drive Minimum length of leading straight section: 300 mm Minimum length of trailing straight section for motor: 600 mm Overall height: 110 mm profile height + Direction of rotation: right, left curves optional Drive type: chain with brushes Conveyor speed: 0.16 m/s Electrical data: Voltage: 3x 380V high voltage Ampere: 1.75 A Power: 0.55 kW Installation: Ceiling suspension with motor support recommended, as shown in the photos Primarily intended for flat transportation. Slight inclines may be possible depending on the length and weight of the trolley convoy Optionally available: Ceiling suspension Angle adjustment Change of direction of rotation (left-hand curve) Extensions with straight section ...

Manufacturer: Core Link AG Model: CL410-ALU Year of Manufacture: 2010 Type of Machine : Conveyor belt Condition:well preserved // removed without damage Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=1.998 m, Overall length= 0.801 m, Overall width= 1.004 m, Net weight= 168 kg,

Copper / Aluminum cable processing line, composed of: MAYPER shredder mill Power: 4 kW Product elevator Useful width: 350 mm Length: 4000 mm GUIDETTI SINCRO 315 compact granulator, for recycling copper or aluminum cables Capacity: 130 kg/h 6.1 kW; 400 V 50 Hz FORNUMAC conveyor belt Useful width: 250 mm Useful length: 1500 mm

power capacity: 7,5 kW feed pressure: 10 bar volume capacity: 815 dm³ /min total power requirement: 7,5 kW weight of the machine ca.: 0,4 kg Alup piston compressor - Tank 350 liters - Soundproof housing (68 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used aluminium ladders 1 piece - 14 rungs - 2 pieces - 100,- € 1 piece - 12 rungs - 2 pieces - 80,- € 1 piece - 10 rungs - 2 pieces - 80,- € 4 pieces - 9 rungs - 2 pieces - 80,- € each

Final compression pressure: 10 pe/bar Speed: 745 1/min Volume flow: 3455 dm³/min Motor power: 22 kW

Dimensions (L/W/H): 6000x1150x2980 mm Weight: 850 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5000x1150x2980 mm Weight: 665 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible.

Key data: 2 , 10

New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...

This MACO VK370 AR ALU Circular Wood Saw was manufactured in 2013. It features a head motor of 5.5 kW, a trim roller motor of 0.75 kW, and a lubrication pump of 0.1 kW. The blade speed ranges from 20–120 rev/min with a maximum blade diameter of 370 mm. It operates at a working air pressure of 5–7 bar. Consider the opportunity to buy this MACO VK370 AR ALU Circular Wood Saw. Contact us for more information.

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 "  ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

Flat conveyor belt on aluminium substructure Length of the strap 410 cm, width of the strap 78 cm With the regulation of the amount

Cooling: air-cooled Control: Hot Gas Valve Control: Digital display Condensate separation: lossless, Level-controlled steam trap Performance data Nominal capacity at pressure dew point +3°C 0.6 m³/min Max. operating pressure 16 bar Total energy consumption (25°C input temperature) 0.16 kW Refrigerant R513A 0.17 kg Installation data Ambient conditions min. / max. 5 / 43 °C Pressure drop at full load 0.25 bar Voltage / Frequency 230 / 50 V / Hz Dimensions and weight Length x width x height 350 x 493 x 450 mm Weight 19 kg Compressed air connection G 3/4 "ag

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg

Unused alubit grinding balls (alumina ceramic) designed for wet grinding (continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [1,000 kg]; 1 1/2'' (38 mm) [990 kg]; 2'' (50 mm) [700 kg]; 1 3/4'' (45 mm) [940 kg]; 2 1/2'' (64 mm) [1,970 kg]. All balls made in Italy, packed in 25 kg bags.

Unused alubit grinding balls (alumina ceramic) designed for dry grinding (batch and continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [960 kg]; 1 3/4'' (45 mm) [1,580 kg]; 1 1/2'' (38 mm) [940 kg]; 2'' (50 mm) [410 kg]; 2 1/2'' (64 mm) [580 kg]. All balls made in Italy, packed in 25 kg bags.

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 160x30mm we also have different sizes in stock. Please see our offers at the shop. Details see picture

Clamping plate with pneumatic cylinder, centering table, centering device, plate field, welding table, welding table, plate boring machine -Clamping plate with: 24 pneumatic cylinders -Material: aluminum -Width: 775 mm -Table length: 1600 mm -Height: 180 mm -Dimensions: 1600/775/H180 mm -Weight: 250 kg

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 320x30mmwe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza Trays / Baking Trays / Cake Trays Aluminum NEW 10 Pieces 300x30mmWe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza Trays / Baking Trays / Cake Trays Aluminum NEW 10 Pieces 280x30mmWe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza trays / baking trays / cake trays aluminum NEW 10 pieces 240x30mmwe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza Trays / Baking Trays / Cake Trays Aluminum NEW 10 Pieces 260x30mmWe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 220x30mm  we also have different sizes in stock. Please see our offers at the shop. 10 pieces of sheet metal size diameter 160x30mm = 80 Euro 10 pieces of sheet metal size diameter 180x30mm = 82 Euro 10 pieces of sheet metal size diameter 200x30mm = 85 Euro 10 pieces of sheet metal size diameter 220x30mm = 8 8 Euro 10 pieces of sheet metal size diameter 240x30mm = 92 Euro 10 pieces of sheet metal size diameter 260x30mm = 97 Euro 10 pieces of sheet metal size diameter 280x30mm = 111 Euro 10 pieces of sheet metal size diameter 260x30mm = 10 pieces of sheet metal size diameter

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 200x30mm  we also have different sizes in stock. Please see our offers at the shop. 10 pieces of sheet metal size diameter 160x30mm = 80 Euro 10 pieces of sheet metal size diameter 180x30mm = 82 Euro 10 pieces of sheet metal size diameter 200x30mm = 85 Euro 10 pieces of sheet metal size diameter 220x30mm = 8 8 Euro 10 pieces of sheet metal size diameter 240x30mm = 92 Euro 10 pieces of sheet metal size diameter 260x30mm = 97 Euro 10 pieces of sheet metal size diameter 280x30mm = 111 Euro 10 pieces of sheet metal size diameter 260x30mm = 10 pieces of sheet metal size diameter