oven alu used for sale

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Clamping aid -Clamping plate -Mouth size: Ø 255 mm -Weight: 20 kg

For sale is a robust and reliable industrial refrigeration dryer from the German quality manufacturer ALUP Kompressoren (model Oekodry DT 260). The device effectively removes moisture from the compressed air and thus protects downstream tools and machines. Technical data (according to nameplate): Manufacturer: ALUP-Kompressoren GmbH Model / Type: Oekodry DT 260 Year of Make: 1998 Permissible operating pressure compressed air: max. 16 bar Permissible compressed air temperature: max. 60 °C Operating voltage: 230 V (1 phase / 50 Hz, normal Schuko plug) Nominal consumption: 0.67 kW Refrigerant: R 134a (0.750 kg capacity) Equipment: Integrated automatic steam trap at the bottom of the front Condition & Use: Visually normal workshop condition with usual signs of use. Compact design, is currently ready for transport on pallet.

Throughput: 5000bottles/h, format parts: 0.75l bottles, an on-site inspection is possible.

Separation system oil, water Separation system for compressors condensate 2 x Automatic water separator 230 V

Air dryer ALUP 16/30 bar 230 V 16 A R 134a Unchecked

Length: 5.25 m, 2 cm height, 3 teeth per 1 inch, Ready to saw: toothed, set, ground - ready for use, endlessly welded

Grain dryer made of ALU two-column MDB-T 2/9, indirect air heater 2500 KW, heating oil, 2 circulating air fan, exhaust air, dedusted, Weishaupt, trapezoidal cladding Tel. 01715213204

Stela drying plant, type MDB-T 1/ 10, aluminum, grain, corn, soy etc. 2 storage containers 2 exhaust fans with 37 KW 2 centro separators Gas burner type Maxon Dismantled for sale immediately. Tel. 01715213204

Manual hand unit: J/N Automatic for single pieces: Ja J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Compressor with tank ALUP HL5000-z10/2M 10 bar 276 m3/h Operating hours: 17854 Tank: 2500 l 2 ALUP single compressors HL 3050-Z488 Motor: 2 x 15 kW used, tested ! Dimensions: 3500 x 1200 x 1900 mm

ALUKAP350 machine, manufactured in 2012 by K.SCHULTEN GMBH from Germany. The 2012 K. Schulten GmbH AluKap350 is a specialized industrial machine produced by K. Schulten GmbH, a German manufacturer known for its expertise in producing machinery and components for industrial applications, particularly in aluminum processing. The AluKap350 is typically associated with aluminum profile cutting and processing. Machines like this are designed to handle precision cutting and processing of aluminum parts, which are widely used in industries such as construction, automotive, and manufacturing. The model number, 350, might refer to specific technical characteristics, such as the cutting capacity, blade size, or processing capabilities. Key features of a machine like the AluKap350 could include: Precision Cutting: The ability to cut aluminum profiles accurately and efficiently. High Throughput ...

Metalworking machine Circular saw cutting line MACO VK370, model VK AR ALU. Manufacturing year 2013. This is a fully automatic saw with a +/-45 degree rotating blade. It has been in production work about 3-4 years. Find more here - .ucymachines/ Contact us at - sales@ucymachines

table length: 1200 mm table width: 700 mm table height: 900 mm table load capacity: 250 Kg weight of the machine ca.: 36 Kg dimensions: 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket - Frame made of aluminum profiles - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. - For clamping: Manual clamping bolt 160514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Alup, Type: Allegro 24, Year: 2003, Schraubenkompressor: yes, Operating hours: 39280, Running idle houres: 4909, Verdichtungsenddruck bar 1: 5 - 13, Hauptläuferdrehzahl U/min 1: 2700, Antriebsleistung kW 1: 24, Volumenstrom m³/min 1: 0,76 - 3,91, Year :2003

saw blade diameter: 130 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm capacity 90 degrees: flat: 180 x 100 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: flat: 120 x 100 mm engine: 3,3 / 4,4 KW 0: 1400 / 2800 U/min weight of the machine ca.: 1060 kg dimensions: 2,5 x 1,8 x 1,85 m TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis 60° links auszuführen. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OMNIFLO overhead Hanging goods conveyor system driven curve aluminum RA2412 Manufacturer: Schöneberger Technical data: Inner radius: 800 mm Outer radius of drive: 1000 mm = 800 mm + 200 mm order drive Minimum length of leading straight section: 300 mm Minimum length of trailing straight section for motor: 600 mm Overall height: 110 mm profile height + Direction of rotation: right, left curves optional Drive type: chain with brushes Conveyor speed: 0.16 m/s Electrical data: Voltage: 3x 380V high voltage Ampere: 1.75 A Power: 0.55 kW Installation: Ceiling suspension with motor support recommended, as shown in the photos Primarily intended for flat transportation. Slight inclines may be possible depending on the length and weight of the trolley convoy Optionally available: Ceiling suspension Angle adjustment Change of direction of rotation (left-hand curve) Extensions with straight section ...

Manufacturer: Core Link AG Model: CL410-ALU Year of Manufacture: 2010 Type of Machine : Conveyor belt Condition:well preserved // removed without damage Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=1.998 m, Overall length= 0.801 m, Overall width= 1.004 m, Net weight= 168 kg,

Copper / Aluminum cable processing line, composed of: MAYPER shredder mill Power: 4 kW Product elevator Useful width: 350 mm Length: 4000 mm GUIDETTI SINCRO 315 compact granulator, for recycling copper or aluminum cables Capacity: 130 kg/h 6.1 kW; 400 V 50 Hz FORNUMAC conveyor belt Useful width: 250 mm Useful length: 1500 mm

power capacity: 7,5 kW feed pressure: 10 bar volume capacity: 815 dm³ /min total power requirement: 7,5 kW weight of the machine ca.: 0,4 kg Alup piston compressor - Tank 350 liters - Soundproof housing (68 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used aluminium ladders 1 piece - 14 rungs - 2 pieces - 100,- € 1 piece - 12 rungs - 2 pieces - 80,- € 1 piece - 10 rungs - 2 pieces - 80,- € 4 pieces - 9 rungs - 2 pieces - 80,- € each

Final compression pressure: 10 pe/bar Speed: 745 1/min Volume flow: 3455 dm³/min Motor power: 22 kW

Dimensions (L/W/H): 6000x1150x2980 mm Weight: 850 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5000x1150x2980 mm Weight: 665 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible.

This MACO VK370 AR ALU Circular Wood Saw was manufactured in 2013. It features a head motor of 5.5 kW, a trim roller motor of 0.75 kW, and a lubrication pump of 0.1 kW. The blade speed ranges from 20–120 rev/min with a maximum blade diameter of 370 mm. It operates at a working air pressure of 5–7 bar. Consider the opportunity to buy this MACO VK370 AR ALU Circular Wood Saw. Contact us for more information.

Flat conveyor belt on aluminium substructure Length of the strap 410 cm, width of the strap 78 cm With the regulation of the amount

Cooling: air-cooled Control: Hot Gas Valve Control: Digital display Condensate separation: lossless, Level-controlled steam trap Performance data Nominal capacity at pressure dew point +3°C 0.6 m³/min Max. operating pressure 16 bar Total energy consumption (25°C input temperature) 0.16 kW Refrigerant R513A 0.17 kg Installation data Ambient conditions min. / max. 5 / 43 °C Pressure drop at full load 0.25 bar Voltage / Frequency 230 / 50 V / Hz Dimensions and weight Length x width x height 350 x 493 x 450 mm Weight 19 kg Compressed air connection G 3/4 "ag

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

Unused alubit grinding balls (alumina ceramic) designed for wet grinding (continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [1,000 kg]; 1 1/2'' (38 mm) [990 kg]; 2'' (50 mm) [700 kg]; 1 3/4'' (45 mm) [940 kg]; 2 1/2'' (64 mm) [1,970 kg]. All balls made in Italy, packed in 25 kg bags.

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 160x30mm we also have different sizes in stock. Please see our offers at the shop. Details see picture

Unused alubit grinding balls (alumina ceramic) designed for dry grinding (batch and continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [960 kg]; 1 3/4'' (45 mm) [1,580 kg]; 1 1/2'' (38 mm) [940 kg]; 2'' (50 mm) [410 kg]; 2 1/2'' (64 mm) [580 kg]. All balls made in Italy, packed in 25 kg bags.

Clamping plate with pneumatic cylinder, centering table, centering device, plate field, welding table, welding table, plate boring machine -Clamping plate with: 24 pneumatic cylinders -Material: aluminum -Width: 775 mm -Table length: 1600 mm -Height: 180 mm -Dimensions: 1600/775/H180 mm -Weight: 250 kg

Knurling machine, window construction profile machine, insulation joining machine -Manufacturer: Aluro, BTM knurling machine with accessories -Type: Knurling Machine -Function: a single machine, solely for knurling the strand cavity -Drive: 2x Lenze 0.55 kW -Rollers: Ø 125 mm -Travel distance X/Z: 120/155 mm -Accessories: see photos -Dimensions: 1180/700/H1480 mm -Weight: 297 kg

Clamping plate, welding table, straightening plate, T-slot plate -3D welding and work table -in aluminum for stainless steel processing -for positioning and finish welding with T-slot system -Mounting area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Dimensions: 1000/1400/H1300 mm

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 750/600/H950 mm -Weight: 80 kg

Hello, We hereby offer you new, originally-packaged Philips LED lamps of the type BVP130 LED210-4S/740 PSU S ALU C1KC3 from the CoreLine Tempo Large product family. Here are some technical data: Manufacturer: Philips CoreLine Tempo Large product family Type BVP130 LED210-4S/740 PSU S ALU C1KC3 System luminous flux 21,000 lm Nominal luminous efficacy 130 lm/W System power 164 W Light colour 740 neutral white Colour temperature 4000 K Optics Type: Symmetrical Beam angle 70° x 21° Input voltage 220 to 240 V Input frequency 50 to 60 Hz Inrush current 58 A Dimensions: 389 x 486 x 40 mm (W x H x D) Weight approx. 7.5 kg IP66 degree of protection For further technical data, please refer to the manufacturer's pdf product data sheet and pdf assembly instructions, which are available for download. Areas of application, lighting of: public facilities, sports facilit ...

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 320x30mmwe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza Trays / Baking Trays / Cake Trays Aluminum NEW 10 Pieces 300x30mmWe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza Trays / Baking Trays / Cake Trays Aluminum NEW 10 Pieces 280x30mmWe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza trays / baking trays / cake trays aluminum NEW 10 pieces 240x30mmwe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza Trays / Baking Trays / Cake Trays Aluminum NEW 10 Pieces 260x30mmWe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 220x30mm  we also have different sizes in stock. Please see our offers at the shop. 10 pieces of sheet metal size diameter 160x30mm = 80 Euro 10 pieces of sheet metal size diameter 180x30mm = 82 Euro 10 pieces of sheet metal size diameter 200x30mm = 85 Euro 10 pieces of sheet metal size diameter 220x30mm = 8 8 Euro 10 pieces of sheet metal size diameter 240x30mm = 92 Euro 10 pieces of sheet metal size diameter 260x30mm = 97 Euro 10 pieces of sheet metal size diameter 280x30mm = 111 Euro 10 pieces of sheet metal size diameter 260x30mm = 10 pieces of sheet metal size diameter

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 200x30mm  we also have different sizes in stock. Please see our offers at the shop. 10 pieces of sheet metal size diameter 160x30mm = 80 Euro 10 pieces of sheet metal size diameter 180x30mm = 82 Euro 10 pieces of sheet metal size diameter 200x30mm = 85 Euro 10 pieces of sheet metal size diameter 220x30mm = 8 8 Euro 10 pieces of sheet metal size diameter 240x30mm = 92 Euro 10 pieces of sheet metal size diameter 260x30mm = 97 Euro 10 pieces of sheet metal size diameter 280x30mm = 111 Euro 10 pieces of sheet metal size diameter 260x30mm = 10 pieces of sheet metal size diameter

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 180x30mm  we also have different sizes in stock. Please see our offers at the shop. 10 pieces of sheet metal size diameter 160x30mm = 80 Euro 10 pieces of sheet metal size diameter 180x30mm = 82 Euro 10 pieces of sheet metal size diameter 200x30mm = 85 Euro 10 pieces of sheet metal size diameter 220x30mm = 8 8 Euro 10 pieces of sheet metal size diameter 240x30mm = 92 Euro 10 pieces of sheet metal size diameter 260x30mm = 97 Euro 10 pieces of sheet metal size diameter 280x30mm = 111 Euro 10 pieces of sheet metal size diameter 260x30mm = 10 pieces of sheet metal size diameter