oven alu used for sale

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 2003 Tested at 37°C and -2°C

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 1999 Tested at 37°C and -2°C

MEMMERT BE 800 incubator / oven with natural convection 70°C Capacity: 749 liters Temperature range: ambient temperature +5 °C to +70 °C Interior glass door Built-in digital temperature display 4 stainless steel shelves On wheels Power supply: 230 V Frequency: 50-60 Hz Power: 2000 W External dimensions (W) x D x (H): 119 x 75 x 161.5 cm Internal dimensions (W) x D x H: 103.5 x 60 x 120cm Tested at 37°C (36.2°C reading) and 50°C (48.2°C reading) Very stable indoor temperature, only a slight difference between the required temperature and the actual temperature

Manufacturer: NeoDen Model: IN8C Type of Machine : Reflow Oven - Heating zones: 8 total (4 upper / 4 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: 3.6 kW - Typical working power: approximately 1.5 kW - Machine dimensions: 1660 x 607 x 1075 mm (L x W x H) - Net weight: 241 kg - Gross weight: 308 kg Standard Accessories Included - ...

Deck Oven Miwe Condo CO 3.1208 Year: 2012 - Manufacturer: Miwe - Model: Condo CO 3.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With night start function - each floor individually 9.4 kW together 28.2 kW - Entire furnace with proofer 30.1 kW - With ECO function - with proofer Proofer has 1.9 kW - With exhaust hood - Can be moved on castors - Year of construction 2012 - Outer dimensions approx.: 150x 135x190cm WxDxH

MIWE electro 5 herder 1.20m wide 1.60m deep with fixed program control. Clear hearth height 170mm Clear stove height 220mm top stove Stone slab design Total connected load: 65,750KW Extractor hood: no ( accessory ) Fully assembled Mounting height: 2330mm Maintenance was carried out on the furnace annually. Oven stood in a bakery school Width: 1600mm Depth: 2420mm without extractor hood Baking surface: 9.6sqm Steering page on the right Water connection: 1/2"

MIWE electric 5 stoves 1.20m wide; 1.60m deep with FP8 control and 1 pull-out stove Number of stoves: 5 Stove size: 120 x 160cm Pull-out stove: 1 Baking surface: 9.6sqm Heating type: electric Clear Stove Height: 170mm Clear Stove Height: 220mm Top Stove Hearth doors: stainless steel with viewing window Installation Page: Left Control: FP8 Water meter: yes Mounting height: 2330mm Width: 1600mm Depth: 2400mm Total connected load: 65,750KW

Oven Thermoscientific OMS 104L F31/RA/123/19 GENERAL PROTOCOL OVEN OMS100 104 L Purchase date: Jul 2019 Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

Manufacturer: NeoDen Model: IN12C Type of Machine : Reflow Oven Technical Specifications -Heating zones: 12 total (6 upper / 6 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: approximately 4.8 kW - Typical working power: approximately 2.2 kW - Machine dimensions: 2300 x 650 x 1280 mm (L x W x H) - Net weight: 300 kg - Gross weight: ...

For sale are 4 MIWE Ideal Oven 1: MIWE Ideal R 6 Cookers 120x200 EK 2Pull-Out MUCS Control GAS Burner Oven 2: MIWE Ideal R 6 cookers 120x200 EK MUCS control GAS burner Oven 3: MIWE Ideal R 6 Cookers 120x200EK MUCS Control GAS Burner Oven 4 MIWE Ideal R 6 Cookers 120x200EK MUCS Control GAS Burner

Manufacturer: Essemtec Model: RO300FC US Year of manufacture: September 2005 Heating zones: 3 Cooling zones: 1 Total zones: 4 Voltage: 208 V Current: 25 A Operating hours: approximately 6,000 Condition: functions excellently Certification: CE marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

The oven works perfectly

Deck oven W&P, type: Matador -In very good condition- - Number of stoves: 5 - Baking surface: 15 m² - Lower both stoves extendable - Burner: gas or oil as desired - Very good condition, everything technically checked, ready for immediate use Visits and test runs are possible by arrangement. Delivery and assembly on request. Overhaul possible.

Convection oven Manufacturer: Memmert Type: ULE 500 Features: Material: Stainless Steel Electric heating, max. temperature: 220°C Electrical power: 2000 watts, at 230 volts - 50 Hz

Genlab Airflow Oven Model: MPO/450H/TDIG/HD Double Door 240V, 1PH, 50/60HZ Load: 3.0kW

Genlab Oven Model: PRO/100/TDIG Internal dims 485 w x 445 h x 415 deep Volts 240 AC, 1 PH, 50/60 Hz Load 1.5 KW, 6 amps Year 2023 CE marked

used in-store baking oven Miwe econo, for 6 trays 60 x 40 cm, with hood, cooking chamber and steam condenser, in baker's condition, checked and tested, runs perfectly, electric

Material Name: Oven Bottom Center Cover Material Brand: Generic Model: NIL Material Type: 2997mm Material Specification: 2997mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

Material Name: Oven Panel Bracket Material Brand: Generic Model: NIL Material Type: 2997mm Material Specification: 2997mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

Material Name: Oven H-Cover for LO1 Material Brand: Generic Model: NIL Material Type: 2997mm Material Specification: 2997mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

4 x Heuft VTR oven All ovens for 2 trolleys 10 tier trays 60x80 Furnace after general overhaul in 2026 Furnace with separate exhaust hood including display with digital control There are 2 rack trolleys per oven each stove is for 2 rack trolleys crosswise with 10 supports 60x80 cm optionally, additional rack trolleys can be purchased I oferiere ofen: With boiler possible 2 boilers in tandem with mounting me all containers With pipes insulation With transport

Material Name: SS 430 Former Holder Track (In Oven) Material Brand: Generic Model: Former Holder Track Material Type: Fabricated oven track / guide rail Material Specification: Fabricated oven track / guide rail PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Material Name: Oven Bottom Panel 2000mm x 1130mm Material Brand: Generic Model: NIL Material Type: 2000mm x 1130mm Material Specification: 2000mm x 1130mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

Model: LR1 108 5 D Manufacturer: HEIN Backofenbau Year of manufacture: 2017 Serial Number: 3002419 Power supply: 400 V, 3-phase, 50 Hz Connection electrical power: 3 kW Nominal heating power: 100 kW

- Miwe TC Sterueung - for 8 trays 60x40cm - with proofer - for 16 trays 40x60cm Technical data: - 400/230V 3 / N / PE / 50 Hz - Furnace 15.5 kW - Year of construction 2020 - Electric Proofer : - Type: US 2.0 - Year of construction 2020 - 2.2 kW - 230 volts Dimensions: 90cm wide 100cm deep cm high

In-store baking oven Miwe Aero 6.0604 with proofer and steam condenser - Miwe FP control - for 10 trays 60x40cm - with proofer - for 16 trays 40x60cm Technical data: - 400/230V 3 / N / PE / 50 Hz - Furnace 19.8 kW - Year of construction 2018 - Electric Proofer : - Type: US 2.0 - Year of construction 2018 - 2.2 kW - 230 volts Dimensions: 90cm wide 100cm deep cm high

A used Wachtel Piccolo PRO II-4 deck oven from 2023 is currently for sale and immediately available in stock. Deck Oven Quail Piccolo PRO II-4 Bj.2023 - Stone slabs oven - Manufacturer: Wachtel - Type: Piccolo PRO II-4 - 4 floors - 120cm wide and 80cm deep on each floor - upper 2 levels are 21cm high - lower 2 floors are 17cm high - With fixed water connection - Each floor with separate steam box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 35.54 kW - Year of construction 05 / 2023 Outer dimensions: 152 x 134 x 218cm, W x D x H

Rotary bakery oven HEIN ECOSTONE² LR1-108-5D Manufacturer: HEIN Backofenbau GmbH (Luxembourg) Model: ECOSTONE² LR1-108-5D Year of manufacture: 11/2017 Heat Power: 100KW Power Supply: 400V / 3-phase / 50Hz Electrical power: 3KW

Vibratory dryer WALTHER TROWAL G 100 B Year of construction: 1998 Bowl dimensions: Ø 1100 m x height 1100 mm Inside dimensions: width 200 mm x max height 300 mm Motor rotation: 1500 t/min. Motor power: 0,45 kW Max heating capacity: 3 kW In perfect working condition Weight: 250 kg

Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026.

used confectioner's oven Wachtel Piccolo I-4, overhauled, 4 shelves for trays 60 x 80 cm, on stone, control DMS 3 MASTER EM 100 GLAS, with hood, steam condenser and base, Fabr.-Nr. 28559, built in 2014, only little used, 400 V, 50 Hz

Manufacturer: SMT N2 Model: 460/1.6 C Type of Machine : Reflow Oven Condition - Good condition, regularly serviced. Maintenance records available on request. Fully operational. Find more here - .ucymachines/ Contact us at - sales@ucymachines

BINDER KB-53 incubator/refrigerated oven with forced convection 100°C Model: KB53 refrigerated and ventilated Capacity: 53 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 1 shelf Cable routing: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Interior dimensions: 40 x 40 x 33 cm Overall dimensions: 64 x 84 x 58 cm Weight: 72 kg Year of manufacture: 2005 Tested at 37°C and -5°C

degree: max 1800 working heigth: mm length: mm width: mm depth: mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mini spiral oven, Type: SSOC-15.75-1.6-16T-A-G, Serial number: SPOV-3SC09, Year of construction: 2019, Model: North - South, Execution: Right hand execution, Tiers: 16 pieces, Product gap: 55 mm, Belt width: 400 mm, Heating: natural gas, 352 kW, Gas pressure: 138 - 480 mBar, Temperature: max 232 °C, Steam: 270 - 680 kg/h, Power: 3 x 380V, 50Hz, 46A, Dimensions: 6750 x 2600 x 4000 mm, Including belt washer and CIP system, Mini spiral freezer, Type: SSF-16-1.6-12T-GLYC, Serial number: SPFZ-S01, Year of construction: 2013, Model: North - South, top-down, Belt width: 400 mm, Tiers: 12 pieces, Product gap: 105 mm, Refrigerant: Glycol, Cooling power: 70kW, Steam: 113 kg/h (CIP), Water: 227L/cycle (CIP), Power: 3 x 380V, 50Hz, 57A, Dimensions: 5400 x 2600 x 3150 mm, Including CIP system

-Electric deck oven -Manufacturer: Quail - Control: Master -5 shelves each 80cm wide and 120cm deep -Total baking surface 4.8sqm -each floor with separate control -Each floor can be controlled separately with top and bottom heat -each floor with steam function -with exhaust hood -Year of construction: 2015

EKU C9F-6GS 6 Burner Natural Gas Stove Hob (gas burner) Number of burners: 6 stand-alone gas burners. Burner configuration: Divided into two performance classes for flexible pot sizes: 3 x small/medium-sized burners: 3.5 kW each (burner head Ø approx. 80 mm) 3 x large power burners: 6.0 kW each (burner head Ø approx. 110/120 mm) Total power hob: 28.5 kW gas output. Equipment: Cast-iron pot supports (slide shelf) and thermoelectric ignition fuse on each flame for maximum operational safety. Oven (undercounter)Type: Gas-powered large-capacity oven (statically heated) with piezoelectric ignition. Oven power: approx. 8.0 kW to 9.0 kW burner power. Inner dimensions: Suitable for Gastronorm grates and trays (GN 2/1). Temperature range: Adjustable from 100 °C to 300 °C via a safety gas thermostat. Connected loads Total connected load (gas): approx. 36.5 kW to 37.5 kW (sum  ...

Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen

Complete break room furniture set including 8 chairs, 2 tables and 2 microwave ovens. This lot is ideal for setting up a dining area in a professional environment, including: Mechanical workshop Industrial company Car Garage Office or technical room The chairs offer a simple and sturdy seat, while the tables can accommodate several people. The two microwaves allow for quick reheating of meals for multiple users. Complete and economical solution to equip a break room or a relaxation area in a company. Auction-ID: A1-48554-17

Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode heat container -Drying oven: with isolation transformer -Type: ES 2 -Technical data: unfortunately no longer legible -Usable space: Ø 100 x 430 mm -Transport dimensions: 520/230/H560 mm -Weight: 14 kg

Hot Box Tunnel Oven Variable temperature control 0-200deg.C Used for extrusion, currently used for Neoprene, EPDM, and Nitrile tube This is totally unique and does the job of a 25m long in 6m footprint.

Used rack oven W&P, type: Green REC 1280 -In very good bakery condition- - for tin trolleys 60 x 100 cm - with gas or oil burner - Rack trolley with 21 supports (12.6m²) - El. Connection: 400 V, 50 Hz, 9 A - Dimensions: W 1,740 x H 2,400 D 1,900 mm - Max. weight turntable: 350 kg - Very good condition, technically everything checked Visits and test runs are possible by arrangement.

Paint drying oven from Thermo Scientific with a usable volume of 120 litres and a maximum operating temperature of 250 °C. The unit is designed for drying and curing paints, coatings and synthetic resins in the industrial and laboratory sectors. The cabinet has an exhaust air connection and complies with temperature protection class 2 in accordance with DIN 12880.The unit is used and shows normal signs of use in the interior. The housing is in good condition without significant damage. Scope of delivery: 1 Thermo Scientific LUT 6050 paint drying oven Connection cable Without accessories or installations Type: LUT 6050 Year of construction: 2018 Order no.: 50049643 Factory number: 42383627 Max. temperature: 250 °C Usable volume (steam room): 120 l Power: 3.2 kW Connection: 1N/PE 230 V / 50 Hz / 14.4 A Protection class: IP 22 Temperature protection: DIN 12880, class 2 Exhau ...

Machine name: POLIN BELT OVEN Type and model: POLIN 8.8MP Date of manufacture: UNKNOWN Manufacturer: POLIN ITALY Country of origin: General description: TUNNEL OVEN with continuous baking, metal mesh belt with traction chain on the edge. Total baking surface is 8.8 MP, total oven length 11900 mm, total width 1500mm, height 2600mm, belt working width 880 Equipment: .Electrical control panel,.Riello gas burner, variable speed converter, belt, oven temperature probe, electronic temperature regulator dimensions: 11900 x 1500 x 2600 mm Auction-ID: A7-49933-14

Name of the machine: POLIN BELT OVEN Type and model: POLIN 15.5MP Date of manufacture: UNKNOWN 5. Manufacturer: POLIN ITALIA Country of origin: Italy General description: TUNNEL OVEN with continuous baking, metal mesh belt with traction chain on the edge. Total baking surface is 15.5 MP, total oven length 15000 mm, total width 2280mm, height 2900mm, working width of the belt 1120mm Equipment: .Electrical control panel,.Riello gas burner, Variable speed converter belt, oven temperature probe 2 pcs, electronic temperature regulator 2 pcs Dimensions 15000 x 2280 x 2900 mm Auction-ID: A7-49933-15

stainless steel; 6 levels euro bakery standard size 600x400 mm; touch button operation; digital display; including stainless steel open shelf base cabinet 2x 7 GN 1/1 levels; 9.5 kW; Auction-ID: A1-49547-15

Each floor equipped with touch control; Equipped with stainless steel height-adjustable bridge insertion function; chamber size approximately 1650x1180x150 mm; overall size of the setup 2150x3200w2500 mm; equipped with extractor hood; Auction-ID: A1-49547-6

Table model; stainless steel; 3 levels bakery standard baking trays size 600x400 mm; timer; 230 - 415 Volts; 6.1 kW; Auction-ID: A1-49547-9

Infrared Reflow Oven THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-257

THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-183