otto mayer used for sale

This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information.

This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine.

Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details.

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

Heated Bonding Press Manuf.: Paul OTT Model JU3013 415v 51kW (Tech data attached)

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008

Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001

Widebelt Sander line with 3 machines Working width: 1300 Composed of: Boere Elite - 1 x calibration unit with contact roller - sandinmg unit from below Ernst LKB - Cross Sanding Unit - Longitudinal Sanding Unit OTT RSO - Calibration Roller - Sanding pad

An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.

OTT Comet-2 1100 • Wide belt sanding machine • Grinding width 1100 • Machine is unchecked • Service recommended • No Guarantee / No Warranty • From stock Lieboch NET € 1.500,00

Mould grinding machine OTT - KG Up to 150 mm wide with Stepless Transport Carpet Profile strip and semi-round mouldings

I am selling a wide belt sander OTT MEGA TR11, built in 1996. Configuration: Hard-rubber calibration cylinder Combination unit rubber cylinder + pneumatic shoe with segment control. Working width 1100mm. Electronic height adjustment with digital display. 3-160mm 1 motor 11kW 2 feed rates. Sensitive adjustment of the shoe position. Pneumatic adjustment of the shoe and cylinder pressure. Condition LIKE NEW ! The machine worked very little. Available the same.

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, plastering unit -Manufacturer: Paul OTT, Finishing unit from edgebanding machine U 206 -Type: KEO-04 -Motor: 0.3 kW -Speed: 1450 rpm - laterally adjustable -Height: adjustable -Number: 2 units available Price: per piece -Dimensions: 400/280/H660 mm / 480/290/H660 mm -Weight: 35 kg/ 36 kg

OTT Tornado R + PU PLC Comp. Control 7" TFT-Touch color display CM-CombiMelt for EVA and PUR hot melt adhesives Pre-milling unit - joining Full car. Role magazine Full car. Edge magazine Flush caps pneum. 0-3° Flush Milling - 12mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounds Radius scraper blade Wing Scraper Soundproof booth with room extraction Cleaning set with 4-fold spraying device, fine buffing device and lubricant spraying device First delivery 2006 Machine is WORKSHOP TESTED in TOP CONDITION from stock Lieboch

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

OTT MEGAtronic 111 Wide-belt calibration fine grinding machine 1. Grinding Unit Calibration Roll Unit 2. Grinding unit electronically controlled link sanding shoe unit Working width 1100 mm Feed speed 5 + 10 m/min Motor power grinding unit approx. 11 kW Machine is WORKSHOP TESTED  from stock Lieboch

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Gluing unit, gluing part, gluing head, heating tank for edge banding, edge banding machine, melting unit with granulate container for edge processing machine -Manufacturer: Paul OTT, aggregate carrier from edge banding machine U 206 -Individual components: see photos -Dimensions: 780/400/H230 mm -Weight: 27 kg/piece

Speed control unit, speed controller, controller, motor controller, motor control, motor control controller, motor controller Manufacturer: Ott, Motor control motor controller -Type: K10024-02 -Motor control: M-BL-10-24 -Number: 2 controllers available Price: per piece -Voltage: 15VDC to 30VDC -Dimensions: 75/45/H105 mm -Weight: 0.2 kg/pc.

DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available -Dimensions: 215/63/H95 mm -Weight: 2.3 kg.

Manufacturer: OTT Model: Strong Edge Year of Manufacture: 2020 Type of Machine : Edge banding machine Find more here - / Contact us at -

Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm -Weight: 105 kg

Key data: 110 mm, 1 , 160 mm

Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...

PART NUMBER: 7549 Specifications: - max width of the workpiece 1100mm - max height of the workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + boot boot + metal roller –in advance: - metal roller, slip - aggregate - metal roller, slip - A unit with a shoe - metal slip outfeed roller – from below: - Pulling strap - pneumatic oscillation of the belts - electric lifting of the table top - 2 types of feed speeds - 11kW motor - with pneumatic brake - working pressure 6-8bar - extraction spigot diameter 2x150mm - total dimensions length/width/height 1960x1700x2000mm - weight about 2000kg ADVANTAGES – made in Germany – 2 units – unpainted – used grinder, very good condition Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Electricity connection 400V 13kW 2 heating plates à 1200 x 2250 mm Heating plates controlled by 2 thermostats Press pressure at 250 bar LxDxH: 2590 x 1330 x 1950 mm Weight approx. 2800 kg Press thickness 380 mm

Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min

Wide belt grinding machine  with 3 rollers and 3 belts Grinding width 1300 mm Year of manufacture 2001 Power 33 kw 2 main engines  Amper 69

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

pressing area: 3000 mm x 1350 mm; opening: 400 mm; heating: electrically; plate sourface: alu; emergency stop switch: yes / ripcord; pressure: 140 t; number of cylinder: 8; electriticy: 34 A; motor power: 22,4 kW; machine length: 3550 mm ; machine width: 1550 mm;

approx. 23 pieces OTTO dangerous goods container, 600L, large container "IBC" – used -: Price per piece from location: 395.- € (net)! Manufacturer: Otto Containersysteme GmbH Type: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Manufacturer Part Number: 33782 Year of Make: 1999 Capacity: 600L Tank material: St. W 24 Maximum permissible gross weight: 1.090kg Net weight: 190kg with approval as a large container "IBC" for the national (GGVS/GGVE/GGVS and international (ADR/RID/IMDG code) transport of dangerous goods of packaging groups I, II + III (X-coding) Dimensions according to DIN 30741 Tank made of steel, hot-dip galvanized with hinged, lockable lid Lid locks in place by special spring technology up to approx. 70° at any opening angle Container all around with only 2 closures on the front with forklift pockets, safety hook for PE bags, nameplate and bag Conditio ...

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

Overview  This automatic crater was manufactured in 1996 by the German company Otto Fleischer. The Rota/1/E model is a single-head packing machine. It is still installed and immediately available. Technical data  Manufacturer: Otto Fleischer Type: Rota/1/E year of manufacture: 1996 Bottle formats processed: 0.7L (GDB) Operating pressure: approx. 6 bar Power supply: 380 V / 50 Hz / N / PE Connected load: approx. 4 kW Control voltage: 24 V

Assembly angle on both sides with threaded plates brand: Otto Kraft height 835mm ; Width 550 mm ; Length 450 mm plate size 750 mm x 500 mm All details without gewaehr

For sale is a tested pressure vessel with a capacity of 900 liters. The container from the well-known manufacturer OKS is built in 2023 and has not yet been used. Due to the existing TÜV test, the container complies with the applicable regulations and is ideal for use in industry, trade or even in the hobby sector. Technical data: - Manufacturer: OKS Otto Klein GmbH - Year of construction: 2023 - Volume: 900 liters - Max. operating pressure: 11 bar - Test pressure: 16.5 bar - Temperature range: -10 °C to +80 °C - Medium: Air / Nitrogen - Corrosion surcharge: 0.5 mm - TÜV test available (04/2023) - Complies with Directive 2014/29/EU If you have any questions, please feel free to contact us at any time

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Otto Hänsel GmbH Type: HWR Contents: 330 l Net capacity 200kg Output: from 300 kg/h up to 800kg/h, in depend of product Enginepower: 3,8/3,1 kW Agitator speed: 90 / 45 n/min. steampressure: 10 atü steamconsumption: bis 120 kg/h Steam: Sattdampf, bis 10 bar dimensions: ca. 1500 x 1325 x 1950 mm weight: ca. 1280 kg different: Copper inner shell refurbished from the last owner, this mean checked, cleaned, defect parts changed, paints I offer this machine in checked/cleaned/painted” condition

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Otto Hänsel GmbH Type: HVK 305 Volume: up to 250kg engine: 1,5 / 1,2 HP Speed: 46 / 23 n/min. steam pressure: 10 atü steam consumption:max. 135 kg/h dimensions: 1650 x 1650 x 2000 mm (lxwxh) We offer this machine in checked, cleaned, painted” with new bears and seals' condition, without warranty

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

Laboratory three-roller Manufacturer: Otto Hermann (Hamburg) N°: 4023 Power: 0.1 kW 220 volts Roll width: 150 mm Ceramic LWH: 340 x 250 x 250 mm

A-05. Gas Separation System (F-608) Partial system, 1 tank type OKFA 900.140.1.10°/900.MZ.C, Built: 2017 Complete system (control, etc.), functional, cleaned Manufacturer: Otto Klein Filtertechnik Apparatebau/Engineering GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.2m; Length approx. 5.0m; Mass 7.7t; Volume 2400 l; 140 bar; Maximum filling mass: 2377 kg Find more here - / Contact us at -

VA-12. Compressed Air Systems (Air Reservoir) 2 complete systems, functional, Built: 1991 Manufacturer: Otto Boge GmbH & CO.KG Each unit contains: - 1 BOGE compressor tank - Diameter: 1.20m - Length: 2.20m - Mass: 1.5 t - Volume: 2000 l - Pressure: 16 bar Each unit includes: - 1 compressor, Type K-TROCHL-KOMPR - Manufacturer: Kompressor HD Technik GmbH Mülheim/Ruhr - 1 motor Technical Data: - Intake capacity: 5-50 m³/h - Intake pressure: 1.03-1.35 bar - Temperature range: 5-30 °C - Motor type: SCHORCH K 3200 L - Model: B 1014-2, 24 kW, 400V Find more here - / Contact us at -

Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

An Otto Heinrich rotating pancake machine is available. Capacity: 6, operating temperature: 300°C, output: 80 pancakes/h. Spare parts included.

Furniture trolleys, furniture and plastic rollers, furniture trolleys, transport trolleys, platform trolleys, transport trolleys, heavy-duty trucks, table trolleys, assembly trolleys -Manufacturer: Otto, Transportroller -Interior dimensions: 560 x 360 mm -Version: 4x swivel castors -Load capacity: 250 kg -Number: 1 piece -Dimensions: 600/400/H170 mm -Weight: 3.8 kg

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: OKA Type: TBA Depositor working width: 450 mm different: wire cutter moveable on rolls workingtable folding I offer this machine in as-is where it is condition ex warehouse Hessisch Lichtenau, unpacked