We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 605)
new
New heavy long arm zigzag industrial sewing machine with normal zigzag and 3 stitch zigzag
used
Working widths: 2000 mmroll surface width: 2200 mmFabric content: 48 Meter0: 160 mmRoller covering: ALU Clouth speed: 20 - 200 m/minCloth tension: 20 - 500 Nvoltage: 400 V / 50 Hzoutput: kwweight: tdimensions of the machine ca.: mcloth accumulator: 48 meters capacityNumber of rolls: 15-axis guide rolls, Ø 160 mm made of aluminumtype of material: double polyamide foil hosematerial thickness: 2 x 15 my to 2 x 50 mymovable roller mill is moved up and down with 4 ball screwsunit was disassembled after test run for transportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
1 Nadel-Pfaff 1291-900 column machine with thread cutter, complete with 220 V dc motor Condition: very good (used)
used
Working widths: Eingangsbreite 400 mmClouth speed: 20 m/minFabric content: 50 mair pressure - required: 6 barvoltage: 380 V / 50 HzCrushing-machine for getting crush-effects in warp-direction. The cloth is feeded into a funnel by a setting unit.The pneumatical controlled plunger puts the fabrics into the guide tube vertically and horizontally. The fabrics will be pushed into the hose which is slipped over the guide tube and then pressed. Afterwards the closed hose will be treated by saturated steam.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Zipper end piece press, with vibrator feeder
used
Fixing width: 250mm, heating output: 8kW, temperature: 0-250°C, speed: 0-12m/min, with documentation.
used
Flatlock machine with 4 needles, with needle spacing 7mm, with upper knife and suction, Made in Germany
used
Without documentation, accessories or spare parts, the machine is defective ist defekt.
used
rare zigzag machine with upper transport and 10 mm zigzag oversty completely from standstill with new 220 volt servo motor
used
Max. roll diameter: 400mm, height: 1753mm, documentation available.
used
Zigzag machine with thread cutter and 6mm zigzag overstroke, completely on stand with 380 Volt electronics stop motor Delivery by forwarding agent Nationwide 80 euro Condition: good (used)
used
Connected load: 3.5kW, was maintained regularly, an inspection is possible.
used
Bar machine with 28 stitches for general bar work, with installable bar length Condition: ready for use (used)
used
Throughput rate: 2500-3000 pieces/h, including spare parts package, raw material can be supplied: approx. 3t of each of the 3 types of fleece, 1.5t of wire and 700kg of ear tape, an inspection on site is possible.
used
1 needle 3-fold transport chain stitch machine with edge trimming
used
Number of winding positions: 840, an on-site inspection is possible.
used
Puller and needle transport machine with thread cutter and 220 volt servo motor
used
Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.
used
from 500 euro Many different blind stitching machines in the warehouse for every operation
used
Working width: 1200-2350mm, with Coating Machine JAKOB WEIß, six 1500kWh burner, was overhauled in 2007.
used
Semi-Automatic Roll Rewinder with Automatic Positioning and Manual Cutting Year of construction: 2023 Condition: Like new, barely in use Manufacturer: LIDEM Construcciones Mecánicas S.L., Spain Inclusive: Blade Lubrication System, Motorized Sharpener, Film Packaging System Description: Semi-automatic slitter rewinder with a cutting width of 2,000 mm, a maximum diameter of up to 400 mm and a minimum diameter of 100 mm. The positioning of the cutting head is automatic, while the lowering of the cutting head is done manually. The fastening system of the cutting head allows for high-precision cutting. System for varying the blade speed to cut all materials. Details: - Two guide benches. Displacement guides for the movement of the head. Cutting head displacement by timing belt. - A servo motor for the movement of the cutting head timing belt allows perfect positioning of ...
used
Working width: 2600mm, with functional software, controls and documentation, without spare parts.
used
FLEISSNER, AB 3,500 mm, with 6 drums, 1,400 mm diameter, built approx. 1985, but overhauled in 2008 and equipped with new motors and burners. Up to 250°C. With natural gas burners 1000/400 kW SIEMENS S7 controller from 2008 with touch screen Motors with frequency converter, 50 m per minute, up to 250 °C
used
Needle system: 134-35 LR, needle size: 110-150Nm, max. sewing speed: 2800/min, max. stitch length: 8mm, stitch type: 301 (Lockstitch), max. clearance under the sewing foot: 14mm, clear workspace: 270x115mm.
1 IBELUS laboratory HT beaker dyeing machine, type LABIbelus 12 Infra Red, with 1 set of 12 high temperature beakers, maximal dyeing temperature 140º C, dye cycle controller IBELUS type IL-720
used
Needle distance: 14mm, number of needles: 2.
used
1 POLYTEX pinking machine type ZO-30, cutting width 300 mm, machine supplied with 2 cutting knives: 1 new serrated knife with 4 mm serration gauge, 1 flat straight knife table size 605 mm x 315 mm, manual actuation
used
Roll width: 2600mm, controls: SIEMENS SIMATIC HMI, machine was overhauled in 2015.
used
1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation
used
Output: 720 pair/h, number of forms: 10, connected load: 13kW, length: 1934mm, width: 1737mm, height: 1910mm, operational hours counter: ca. 100h, including documentation and 20 forms.