Manufacturer:
(Category: 1403)
Internal charger built-in, traction battery pack Unused Auction-ID: A1-40215-59
Without loader equipped with push pull forks hydraulically extendable up to 2500mm Auction-ID: A1-40125-114
Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for forklift from front forklift type H30T -Load capacity: kg -Dimensions: see photos / technical drawing -Transport dimensions: 2500/1150/H330 mm -Weight: 725 kg
Column jib crane, overhead crane, workstation crane -Manufacturer: VETTER, Column jib crane type TS10-7.0, lifting capacity 1000 kg -Base plate: Ø 910 mm -Load capacity: 3000 kg -Chain hoist: Vetter type SIE 10F, year of manufacture 1998 -Lifting speed: 2.8/0.9 m/min -Drive system: SIE 30 20/5 m/min -Swivel drive: yes -Projection: 6025 mm -Total height: 3090 mm -Hook height: 2950 mm -Swivel range: 360° -Transport dimensions: 6740/1750/H2080 mm -Empty weight: kg
Extra options: including battery charger Unused Auction-ID: A1-40215-118
Equipped with: side shift, duplex mast, 1500kg lift, voltage 48v, weight 2950kg, with battery charger, Auction-ID: A1-40125-216
Internal charger built-in, traction battery pack Unused Auction-ID: A1-40215-75
With semi-finished products including Festo Auction-ID: A1-42563-114
length: 1500 mmwidth: 700 mmheight: 840 mm: 3 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-42079-481
Equipped with 8 shelves, no key available. Auction-ID: A1-42079-58
Cleaning roll holder Metal rod in metal supports Auction-ID: A1-42079-411
18 x 2pcs and 10 x 3pcs lockers – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: only 75.-€ (net) / piece (unit)! Manufacturer: Type: Year of manufacture: unknown Width of 3 units: approx. 90cm Depth: approx. 50cm Height: approx. 1.85m Rating: good Available: immediately Location: Waltrop camp
2x Workbench – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 200.-€ (net) / piece Manufacturer: Type: Year of manufacture: unknown Dimensions: Width table top: approx. 1.50m, depth approx. 72cm, height: approx. 80cm Rating: good Available: immediately Location: Euskirchen
AS/RS, TGW with 2xMustang RBG's, 22,756 parking spaces, box size 60x 40x 35cm – used - : Price from location: only 99.500.-€ (net), plus dismantling etc.! Manufacturer: TGW Type: AS/RS, Year of Make: 2011 Device type: Mustang stacker crane Number of stacker cranes: 3 pieces Lanes: 3 Dimensions of the system: length x width x height: 64 x 13 x 7.90m Storage locations: 22,756 pieces Payload: 50kg/crate Load units (dimensions max.): 600 mm x 400 mm x 350 mm Double-deep storage Condition: good Available: immediately Location: Würzburg area Plan is available as DWG – also further technical descriptions Stacker crane Mustang Basic unit: The Mustang single-mast storage and retrieval machine is used for automatic loading and retrieval Retrieval of containers to a high-bay or flow warehouse. This storage system can also be used to feed workstations in ass ...
Lift lifter, Expresso, Lift&Drive 85 – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 950.-€ (net) Manufacturer: Expresso Type: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70kg Charging voltage: 230V, 50Hz Battery voltage: 18V/AH Rating: good Available: immediately Location: Waltrop
approx. 111 pieces Corlettes, Cordes and Koch, width 1.30 / 2m / 2.40m - used - : Prices per piece from location (net): Type 1 + 2 (2m wide): only 99.-€ Type 3 (1.30m wide): only 69.-€ Type 4 (1.30m wide): only 99.-€ For complete purchase (priority): 8.950.-€ (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Foldable Not stackable Depth: 1.15m Type 1 – approx. 70 pieces Width: approx.: 2m, Height approx.: 1.80m Type 2 – approx. 32 pieces Width: approx.: 2m, Height approx.: 1.92m Type 3 – approx. 6 pieces Width: approx.: 1.30m, Height approx.: 1.80m Type 4 – approx. 3 pieces Width: approx.: 2.40m, Height approx.: 1.80m Condition: good, see photos Available: immediately Location: Nuremberg
approx. 30 picking trolleys, Wanzl KT3 – used - : Price per piece: only 150.-€ (net)! Priority is to sell the complete quantity! Manufacturer: Wanzl Type: KT3 Year of manufacture: unknown Type 1 – approx. 25 pieces Depth / width: approx. 46cm Length (without push handles): 1.70m Length with push handle: approx. 1.90m Height: approx. 1.64m Height incl. back wall: approx. 1.75m Floor level plus 2 intermediate floors Type 2 – approx. 5 pieces Length (without stairs): approx. 1.68m Length incl. stairs and push handles: approx. 1.80m Width: approx. 62cm Height approx. 1.83m Without intermediate floor With folding stairs / step Condition: good Available: immediately Location: Waltrop
2 x mobile loading ramps, Butt, BKV 1013, 10 to., front axle ramp for straight loading - used - : Price from location: 14.950.-€ (net), incl. loading! Manufacturer: Butt Type: BKV 1013 Year of manufacture: 2023 Load capacity: 10,000kg Driveway with gratings Overall length: approx. 12,500 mm Total width: approx. 2,300 mm Lane width: approx. 1,960 mm Lip width: 2,000 mm Lip length: 600 mm Length of straight track at the top: 3,200 mm Height of the ramp at the crossing, height-adjustable: 1,200- 1,650 mm With railing Condition: very good Available: immediately Location: 58710 Menden
Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven
Round profile pliers Z50 2.500kg 300-800mm North Griffin Load handling devices NP >2.5000€ like new, not used
Serial number: 516221X00520 Working hours: 9049 Charger included: yes Second battery included: Dimensions and weights: Weight with battery kg 3.251, H 2.160, W 1.099, L 3.061 mm Auction-ID: A7-43223-47
Serial number: 516305X00384 Working hours: 8916 Problems detected: Damaged rear hood, see photo Charger included: yes Second battery included: no Dimensions and weights: Weight with battery kg 4.680, H 2.775, W 1.200, L 4.813 mm Forks 2,400 X 120 X 50 mm Auction-ID: A7-43223-60
Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: AWI Maschinenbau, heavy-duty transport wagon with 1-axle turntable steering -Type: PDV 3.0 To 1.8x7.5 m -Platform: 7615/1800/H1000 mm -Load capacity: 3 t -Tires: Solid rubber tires 415/100-305 -Overall dimensions: 9135/1860/H1000 mm -Transport dimensions: 7615/1860/H1000 mm -Weight: 860 kg
Serial number: F20170X00186 Working hours: 2829 Charger included: yes Second battery included: no Dimensions and weights: Weight with battery kg 774 H 1.850 ,W 1.145 , L 700 mm Auction-ID: A7-43223-3
Serial number: 516305X00545 Working hours: 4606 Issues detected: No Charger included: yes Second battery included: no Dimensions and weights: Weight with battery kg 5.100, H 2.275, W 1.200, L 4.833 mm Forks 2,400 X 120 X 50 mm Auction-ID: A7-43223-66
Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering -Platform: 7000/1500/H735 mm -Load capacity: 15 t -Tires: Solid rubber dual tires, 4 pieces, 425/150-305, see photos -Overall dimensions: 8570/1500/H735 mm -Transport dimensions: 7000/1500/H735 mm -Weight: 1840 kg
Triplex free-lift mast, sideshift, front-rear lighting Auction-ID: A1-42963-18
Various standard parts Auction-ID: A1-42963-53
Surplex GmbH
250 € 
