The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
other machinery for waste disposal and recycling / Recycling units
date: 19.12.2023 add to watchlist
approved
dealer
item-No.: 151721396
New in: 1987

used

check Seller: Telkes Gép GmbH
Location: Land-hu
Price: 2.650 € add to watchlist

Manufacturer: BERGMANN Type: PS 8100-L Machine Height: 2200 mm Machine width: 1,200 mm Machine depth: 1,625 mm Loading height 1900 mm Machine weight: 800 kg Rated motor current at 400 V 3.0 the nominal current transformer 230 volts you have Engine power: 0.38 2 2 kW Required fuse: 10 A, slow-speed Theory. 13 rev/min Protection class: IP 54 (D), (E) Fire Hydraulic oil: HLP 32 Bale weight: 150-400 kg Capacity: 1 m3

other machinery for waste disposal and recycling / Recycling units
date: 15.01.2024 add to watchlist
approved
dealer
item-No.: 148864365
New in: 2020

new

check Seller: Brand GmbH
Location: Land-de

add to watchlist

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

other machinery for waste disposal and recycling / Recycling units
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 163708782
New in: 2015

used

check Seller: OBM Recycling Machinery B.V.
Location: NL Land-nl

add to watchlist

Technical data Feed hopper with hydraulic moving floor and bag opener:Manufacturer BRT HARTNER GmbHType HP5-3035Year of construction 2015Hopper volume 30 m³ Drive line 17.5 kWDimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h)Condition of the machine:The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high.Comments:The documentation (Manual, CE-declarat ...

other machinery for waste disposal and recycling / Recycling units
date: 25.05.2024 add to watchlist
approved
dealer
item-No.: 161595562
New in: 2023

used

Location: Land-at

add to watchlist

Brand new compost turner For tractor with rear driving device From 200 hp For flexible composting with optimisation of space logistics! Promptly available Subject to prior sale!

other machinery for waste disposal and recycling / Recycling units
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 151111279

new

check Seller: Diebels Recyclingmaschinen
Location: Land-de

add to watchlist

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

other machinery for waste disposal and recycling / Recycling units
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 161014310
New in: 2015

used

check Seller: OBM Recycling Machinery B.V.
Location: Land-nl
Price: 190.000 € add to watchlist

Technical data bale opener and dewiring line with weighing systemBale feeding belt, pos. 1:Belt length 11,000 mmWidth between side parts 1,460 mmBelt width 1,200 mmMax. Load 7,000 kgConveying speed 0.2 m/secondDrive power 3 kWPitch of idlers 250 mmSide wall height in feed area 70 mm Side wall height impact wall 1,000 mmFeed height 1,800 mmIndustrial weighing system for the bale feeding belt (additional equipment):Weighing terminal type IT1 Ethernet8 pieces of calibratable load cells with wishbones and a nominal load of 2,200 kg/eachPreload of the system 5,000 kgFeed belt to bale opener and dewirer, pos. 2:Belt length 9,500 mmWidth between side parts 1,460 mmBelt width 1,200 mmMax. Load 6,000 kgConveying speed 0.25 m/secondDrive power 9 kWPitch of idlers 250 mmSide wall height 800 mm Pitch 13Bale opener and dewiring station, pos. 3:Type B/E 3213Year of manufacture 2015Belt length 2,300 m ...

other machinery for waste disposal and recycling / Recycling units
date: 26.10.2023 add to watchlist
item-No.: 162703848
New in: 2004

used

Seller: SPYRA Industrie- und Umwelttechnik
Location: Land-de
Price: 35.000 € add to watchlist

We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.

other machinery for waste disposal and recycling / Recycling units
date: 15.01.2024 add to watchlist
approved
dealer
item-No.: 148807305
New in: 2003

used

check Seller: Brand GmbH
Location: 01587 Riesa Land-de

add to watchlist

Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...

other machinery for waste disposal and recycling / Recycling units
date: 19.02.2024 add to watchlist
approved
dealer
item-No.: 157884158
New in: 2019

used

check Seller: ANT Maschinenhandel UG
Location: 10707 Berlin Land-de

add to watchlist

Fully automatic recycling system for edge trim Compactly designed, no operating personnel needed most of the time, top quality end products. INTAREMA® K transforms edge trim efficiently and carefully into high quality, clean pellets. Up to 100% of pellets returned to the production process.

other machinery for waste disposal and recycling / Recycling units
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 159643772
New in: 2019

used

check Seller: OBM Recycling Machinery B.V.
Location: NL Land-nl

add to watchlist

Technical data PaperSpike 2 G:Manufacturer Grumbach und Petermann GmbHType 2500Year of construction 2019Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h)Weight 1,100 kgDimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h)Weight 3,100 kgDimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h)Weight 4,600 kgDimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h)Weight 400 kgElectrical equipment of the entire system:Voltage 380 - 420 VConnected load 9.5 kWCurrent consumption 20.34 AOperating principle:The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt.The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochur ...

other machinery for waste disposal and recycling / Recycling units
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 162696265

used

check Seller: agicom-pedergnana OG
Location: Land-at

add to watchlist

AGICOM Recycling Machines: Used recycling plant for cables, composites, small electrical appliances. Plant components recycling plant CR300U used: Single Shaft Shredder MR1740 Granulator CMG4050 Zig Zag Separator Turbine Mill Ghibli 352 Separator SA200 Filter tower 16 sleeves Capacity approx. 300 kg/h/modular design

other machinery for waste disposal and recycling / Recycling units
date: 14.08.2022 add to watchlist
item-No.: 144715246

used

Seller: Holzwerk Grasellenbach
Location: 64689 Gras-Ellenbach Land-de
Price: 2.950 € add to watchlist

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

other machinery for waste disposal and recycling / Recycling units
date: 31.05.2024 add to watchlist
approved
dealer
item-No.: 12211762
New in: 2023

new

check Seller: Markus Klanke Entsorgungssysteme
Location: Land-de

add to watchlist

The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks

other machinery for waste disposal and recycling / Recycling units
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 164270610
New in: 2015

used

check Seller: OBM Recycling Machinery B.V.
Location: NL Land-nl

add to watchlist

Technical data single-deck ballistic separator for three separation fractions:Manufacturer Lubo Screening & Recycling Systems B.V.Type Elliptical 10EBB05Year of construction 2015Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kgNote on the separation process:The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans.Condition of the machine:The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in a well- ...

other machinery for waste disposal and recycling / Recycling units
date: 04.06.2024 add to watchlist
approved
dealer
item-No.: 129256448

used

check Seller: EUROTECHNIK Dittrich GmbH
Location: 76456 Kuppenheim, Lochackerstr. 7 Land-de

add to watchlist

Treatment plant (quarry, construction waste) MFL Machine Factory Liezen Radmobile plant Impact crusher MFL RCI 100.130; Hewitt-Robins Vibration Vibrator; Spitzer Silo substructure type SK248; control and all attachments, conveyor belts motor, etc. plant is running. Contact via email: info@germantp.com

other machinery for waste disposal and recycling / Recycling units
date: 10.06.2024 add to watchlist
approved
dealer
item-No.: 164261678
New in: 2016

new

checkTOP Seller: NEUE HERBOLD Maschinen- u. Anlagenbau GmbH
Location: Land-de

add to watchlist

HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit

other machinery for waste disposal and recycling / Recycling units
date: 17.06.2024 add to watchlist
approved
dealer
item-No.: 163221135

used

check Seller: OBM Recycling Machinery B.V.
Location: NL Land-nl

add to watchlist

Technical data for the bale loosening drum:Manufacturer not knownType of bale loosening drumYear of manufacture not knownDimensions of the drum 6000 x 3000 mm (l x d)Height of the welded-in helix 300 mmDimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H)Drive power 2 x 4 kWFunctional description:The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing.Scope of delivery:Bale loosening drumFrame with drive and roller bearings for the bale loosening drumComments:Documentation (operating  ...

other machinery for waste disposal and recycling / Recycling units
date: 25.03.2024 add to watchlist
approved
dealer
item-No.: 148147374
New in: 2020

new

check Seller: Diebels e.K., Recyclingmaschinen
Location: Land-de

add to watchlist

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

other machinery for waste disposal and recycling / Recycling units
date: 10.06.2024 add to watchlist
ankerimg
item-No.: 160060898
New in: 2016

used

Seller: Auch Folien + Technik e. Kfm
Location: Land-de

add to watchlist

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

other machinery for waste disposal and recycling / Recycling units
date: 11.12.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 161297227

used

check Seller: Graphotrade Ltd
Location: Land-bg

add to watchlist

1. feeding conveyor belt 10000/ 800 5.5 KW 2.shredder technofer CC940 SO 55 kw 3. extracting conveyor belt 12000/ 800 2,2 kw 4. heavy contaminants settling tank technofer vads 2,2 kw 5. washing centrifuge technofer LO 25 37 kw 6.conveyor belt 4000/ 800 2,2 kw 7. conveyor belt 6000/800 2,2 kw 8.wet grinder 800/800 55 kw 9. extracting auger 300/ 6000 2,2 kw 10.washing centrifuge jiangsu fungsheng fs 1000 55kw 11.extracting auger 400/7000 2,2 kw 12. screw press 75 kw 13. dry grinder 55kw 14. blower 11 kw 15. serpentine dryer with hot air generator 30 kw 16. stocking silo with mixer 3,6 kw 17.double stage cascade extruder granulator FDJ 130/150 - cutter compactor motor 75 kw  ...

other machinery for waste disposal and recycling / Recycling units
date: 25.01.2024 add to watchlist
approved
dealer
item-No.: 163120651
New in: 2010

used

check Seller: HV R. Heynlein
Location: Land-de
Price: 189.000 € add to watchlist

Complete recycling plant for washing machines, refrigerators and other household appliances The plant was only in operation for 6 years. The new price was approximately €3 million net. Request pictures!

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information