We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,108 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.
used
Bookpress / twin plates / Hydraulic Splek Model IIB Year 1975 Size 280 x 440 mm Stack height 600 mm Pressure 3 tons Available Direct
used
PONAR ŻYWIEC PHM 160 D hydraulic press manufactured in Poland in 1990 is used for machining metal and processing plastics (e.g. polofen or melamine) or rubber. The machine characterised by its high reliability, performs precise machining with a force of 160 tonnes in manual mode as well as in semi-automatic or automatic mode, thanks to its being equipped with time relays. The gantry press is also equipped with, among others, a hydraulic ejector with a force of 60 tonnes and two temperature controllers for the upper and lower parts of the heating plate. The offered machine was purchased from the university and has never worked during typical production. The total weight of the machine is 4000 kg. Technical parameters of the PONAR ŻYWIEC PHM 160 D press - maximum pressing force: 160 t (1600 kN) - ejector force: 60 t (600 kN) - working table surface (L x W): 800 x 800 mm - pressing ...
used
Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 5000 kg
used
Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable
used
2886: 1 gebr. Difiting press 200 kN Fabr. REIS, type TUS 60 OK 20, Bauj. 1991 with hydr. Control Arb.-Ber.: Stroke approx. 700 mm, drive power: 7.5 kW Accessories: extendable table 670 x 570 mm, swing-out top plate 670 x 570 mm, Mounting height 740 mm Other: Passage between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 tons. very good condition
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109138 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
No. 3421: 1 gebr. Tool press Fabr. SCHÖN, type SH-PZ 250, Bauj. 1979 Arb.-Ber.: Pressure power 250 to mm, drive power: .22 kW Accessories: Table 500 x 500 Other: Single stroke 2-hand Single stroke foot switch automatic continuous running set up and tap
used
2 column hydraulic press #5232 Press force: 200 t upper stroke: 500 mm lower stroke: 200 mm overall dimension: 1800x2200x3700 mm Power: 10 PS Weight: 8.4 t
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109139 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
Filter press plate filter ultrafiltration plate filter used Manufacturer: Rhone Poulenc Type: UFP 70 Max working pressure: 4.5 bar/64 psi Torque: 8 mxkg 6x24 plates approx. 2000 x 600 H 1700 mm Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.
new
PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...
used
Plate press Filter press Chamber filter press Industrial wastewater technology -used- Manufacturer: FAZZINI Type: F500 Operating pressure 15 bar Plate size 500 x 500 mm 20 plates with hydraulic unit 1.5 kW and piston pump 0.75 kW Dimensions: approx. 2400 x 750 x 1600 mm All items are checked for function before delivery, if technically possible !
new
PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...
used
N° 0214: 1 gebr. Hydraulic quick-stroke two-stand press Fabr. SMG, Type DS 63, Bauj. 1984 with pressing force 630 kN, retraction force 51 kN Arb.-Ber.: Table area 660 x 460 mm, drive power: 15 kW Accessories: The press was upgraded to UVV 11.064 VBG 7n5.2 in 1991. Other: Light width between the stands 680 mm, max. distance between table top and pestle 385 mm, ejector force 15 kN largest pestle stroke 150 mm.
used
I sell several machines, equipment here. spare parts, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts for forklifts and work platforms. Therefore, be sure to check out my other auctions Briquette press briquetting press chip press Pressing unit without control WEIMA TYPE: TH50 Briquette diameter approx. 50 mm Motor power hydraulics 5.5 KW They only bid on the briquette unit incl. hydraulic power unit. there is no control. I still have a control for briquette press with LOGO module. This can be purchased at an additional cost. The power unit could not be tested. Will be sold as it says here. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone no. by mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The ma ...
new
PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...
used
No. 4877: 1 gebr. Single-stand hydraulic press Fabr. EITEL, Type T 6.3, Bauj. 1973
used
No. 4929: 1 gebr. Eccentric press 22 - 26 to Fabr. EBU, type 25, with stroke number 130 min-1 Arb.-Ber.: Stroke adjustment 80 mm,
used
High Speed Precision Press Maker Obata (Japan) Year of manufacturing - 1981 Capacity 10 t Stroke length 22 mm Speed 100-400 stroke/min price 6000 EUR
used
Completely overhauled HSB 15 incl. certified oil pan and protective fence for a quick and Trouble-free commissioning. Overhauled in 2021 Optional new 8m3 bunker and conveyor screw available. Including. Used machine warranty
new
Collier sleeves Fishbone CPM 16-2.5
new
Graf Kollerhülsen Geriffelt to CPM Pelletpress
used
Baler Presto HPK 50 HS (HPK 750 H), year of manufacture 2013 Manafacture: Presto Type: HPK 50 HS (HPK 750 H) Year of construction: 2013 Hours: 3788 Propulsion: 30 KW Pressing force: 500 kN Filling opening: 1600 x 650 mm (LxW) Duct cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput capacity at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale against prepayment is ex works, without guarantee and guarantee.
used
Corpus press (used) Press for assembly of hulls (b/u) Good quality In good condition Pressurized area of the 800x570 mm Pneumatic cylinders: Number of pneumatic cylinders: 4 Step between stating hole: Distance between fixing holes: 50 mm Compressed air pressure Compressed Air 8 bar Transport dimensions Transport Sizes 1950x600x1150mm Weigh Weight 350Kg
used
• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...
new
Graf Koller sleeves punched for CPM 16-2.5 Pelletier press
new
Collier sleeve Fishbone CPM 22-2.5 for pellet press
new
Koller sleeves Geriffelt for CPM 22-2.5
new
Koller sleeves punched for CPM 22-2.5
new
Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland
used
Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t
used
Fast press /Eccentric press #5282 Force 60 t Stroke : 38mm Strokes/min: 0-450 Overall size: 2650x1500x3200 mm Weight: 8 t
used
Bruderer press. Year of production: 1985 Condition: perfect The press has a soundproofing cabin and a roll feeder.
used
ERFURT PKZZ 315 double column press manufactured in 1984 in Germany is used for, among others, cutting, machining, bending and punching sheet metal and strip metal. Features such as the ability of extensive workpiece machining, a large work table and a 315-tonne operating slider make the crank press ideal for mass production of things such as washing machine parts, agricultural machinery or other types of vehicles. The ERFURT mechanical press is also distinguished by its high-quality welded steel construction, ensuring excellent stability during the production process. The machine uses a slider with a beam ejector, which is adjustable within a range of 400 mm via a motor reduction gear with overload protection. In order to increase the life of the tools and the quality of the parts produced, the 2500 mm long and 1400 mm wide work table has been equipped with hydropneumatic cushions. ...
new
Baling press cardboard foil MF100 | 6 t pressing force The MF100 balers are ideal for pressing cardboard, paper, film, clothing and other materials. Volume reduction through compaction of up to 90%. The press is user-friendly with a large filling volume. The automatic bale ejector helps to remove the bales from the baler without any problems. Characteristics: Bale weight of up to 100kg Ideal for use with medium material volumes Fully automatic bale ejection Powerful cylinder for uniform material compaction Hold-down device to reduce material springback CE certified Made in Europe Specifications: Pressing force: 6 t Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 phase) Machine dimensions (H x W x D): 2371 x 1388 x 1046 mm Transport height: 1876 mm Machine weight: 632 kg Cycle time: 28 seconds Noise level: 65 decibels Bale: Ba ...
used
In the inlet - Baling press Strautmann, type BaleTainer, pressing force 60 t, year of construction 2014 Specifications: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of construction: 2014 Pressing force 60 t Total power 9.0 kW, 400 V Height filling opening 1370 mm Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 slices) Binding 4-fold vertically Machine dimensions with feed: 6,500 x 2,113 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Materials: paper, cardboard, PET bottles, foil Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale against prepayment is ex works, without ...
used
Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.
used
Key data: 63 t
EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW
used
Capazitat 300 Tone Table size 1,500 x 1,500 mm Stosselv creation 500 - 1,000 mm Piston x 400 mm Delete. Table - Stossel Minimum: 500 mm Maximum: 1,500 mm Machine height 4,000 mm Bottom of the floor 1,000 mm Top of the floor 3,000 mm Machine Weight 18.600 kg
used
Press with press area 2200 x 1100 with built-in mould press
used
Vertical baler Strautmann PP 1207 Manufacturer: Strautmann Type: PP 1207 Year of construction: 2002 Pressing force: 58 t Total connected load: 4.5 kW Height filling opening: 1145 mm Filling opening: 600 x 1190 mm Press cycle: 37 sec. Bale size: max. 1180 x 700 x 800 mm Bale weight: up to 350 kg Dimensions: 1844 x 1067 x 2868 mm Weight: 2400 kg Materials: paper, cardboard, cardboard, foil, plastic, PET bottles, tin cans Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
new
Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeum ...
used
Europress EP 6500 V5 H4, pressing force 120 t, year of construction 2009, drive power 75 kW, only 15,334 operating hours, overhauled Specifications: Manafacture: Europress Type 6500 V5 H4 Year of construction: 2009 Operating hours 15,334 hours, as of January Number of pressed bales 138,097 bales, as of January Pressing force main press 120 t Specific pressing force 142 kg/cm² Dimensions insertion chute 1,650 x 1,100 mm Filling volume 3 m³ Filling volume / pressing cycle 1.58 m³ Bale dimensions 730 x 1,100 Length variable Drive power 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load 83 kW Current consumption 150 A Binding 5-fold vertical, 4-fold horizontal, fully automatic Bale weights 450 to 900 kg, depending on bale length and material Hydraulic oil tank volume 1,200 L PLC control (manuf., type) Siemens S7-200 Control Panel (Manufactur ...
used
Korsch EK III single station eccentric tablet press, maximum tablet diameter 60mm, maximum depth of fill 70mm (currently set for maximum 30mm depth of fill). Maximum pressure 200kN. Four speed (11, 22, 32, 42 strokes/minute) capacity up to 2520 tablets per hour, using a single-tip tool.
Rated press force 400 kN Impact stroke 8-95 mm Stroke stroke number 70/142 /min Impact adjustment 60 mm Table area 660x530 mm Impact surface 400x250 mm Recording 3-4 kW Compressed air operating pressure 0.6 Mpa
used
SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...
used
This robust baler is ideal for pressing paper waste from small and medium-sized printers and bookbinding companies. It can be filled manually or automatically, and pressing is also done automatically or manually. Pressure 14 Mp = 137 KN Engine power 1.5 kW at 380 V / 50Hz Bale size approx. 600 x 600 mm
used
Table size 2800x1500 Number of table 2
used
automatic baler Manafacture: UNOTECH Type: UPAMAT 100 V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Duct format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Output: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large-digit display ...