orma presse used for sale

2 x 10 T, adjustable from 1.3 to 10 T Plunger size 250x250mm forward 10 mm second Backwards 25 mm second Travel 100 mm per side, Interior 200 to 400 mm Two-hand operation Motor 1 KW Tank for 60 L hydraulic oil the machine can also be supplied in other sizes and thicknesses.

Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...

Custom made Overall dimensions: 800 x 900 x 1700 mm Table size: 340 x 240 mm Opened height: 340 mm Stroke: 260 mm Working pressure: 180 bar

Used dough divider / bread roll press EBERHARDT, Type: Optimat - including 4 casters - Maximum dough layer: up to approx. 3,200 g - technically tested and cleaned - immediately ready for use The machine is in good condition and ready for immediate use. Viewing and test run are possible by arrangement.

Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Tuschier- and test injection press make REIS type TUS 60 A 10 HMachine -No: 177/66, built in 1966Table surface: 590 x 600 mmMax. Shaped area: 600 x 1200 mmMax. Mold height: 680 mmMax. Mold weight: 2.5 tStroke of the table: 500 mmEjector stroke: 200 mmEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 0 - 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Stroke speed stepless: 0 - 80 mm / sLoad capacity of the upper swivel plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Test sprayer- Heater- ejector- swivel top plate m. hydr. locklittle usedPrice on request.Delivery: ex warehouse or location free loading tru ...

Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg

Spotting Press Fabr. REIS Type TUS 60 OK-40 HWMasch. -No: 693/73 built in 1973Press force: 40 tTable or size of the ram surface: 670 x 470 mmPassage between columns wide / long side: 620/470 mmgr. distance between clamping surface and plunger: 740 mmRam stroke: 770 mmPress speed: 20 mm / sRapid traverse: 50 mm / sOpening speed: 34 mm / sEjector force: 3 tEjector stroke: 200 mmHydraulic drive: 380 V, 9.5 kWSpace required including space for aussfahrb. Table and pestles: 2200 x 1875 x 3000 mmWeight approx: 2400 kgWith- compl. electrical device- Control panel for the electrical system and hydraulics- Test sprayerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM ...

Punching machine make WEINGARTEN type XKSHw 30Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Small eccentric press make BMW type TP 3Machine -No: 60301724 Year of construction 1964Max. Press force: 3.0 tTable size: 200 x 160 mmBear size: 80 x 60 mmDiarrhea hole in the table: 80 mmDrive power: 0.37 kWWeight approx: 134 kgOutside dimensions approx: 700 x 350 x 750 mmWith- 2-hand release- Footswitch- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi Punching machine Fabr. EDEL type ALM 35/1700Fabr. -No: 19704-1265Punching force: 35 tWorking length: 1800 mmTable width: 500 mmEngine power: 3 hpWith- welded all-steel construction- wide Fußausrückung- Longitudinal T-slots in the tablewithout tools (the tool must be made especially for the respective work)usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type AZR / H638997 built in 1988Max. Press force: 63 tStroke adjustment: 10 - 90 mmRam adjustment: 55 mmRam strokes: 70 hpM.Table size: 800 x 800 mmDrive power: 4.0 kWWith- large table- 2 damping cylinders- Two-hand release- hydraulic clutch- Additional brakeused, in first-class conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type DEPSR 63Year of construction 1980Technical specifications:Printing capacity: 63 tSlide adjustment: 100 mmStroke adjustment: 60 mmStrokes: 150 HpM.Drive power: 5.5 kWWeight approx: 5500 kgWith- BVK 422 feed unit Feed max. 200 mm Band width max. 200 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Foil stamping press make SCHÖN & CIE type 22 BFabr. -No: 25864Technical specifications:max. pressing force 60 tTable size 350 x 320 mmHeating power 50 - 450 ° CPunching stroke adjustable 1 - 14 mmDrive power 1.5 hp / 1410 rpm.External dimensions 800 x 1100 x 1550 mmWith:- infinitely adjustable punching and embossing time- infinitely adjustable film transport- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single-column press make MATRA type ME 63.2Machine No: 519299Press force: 63 tOperating pressure: 200 barPiston diameter: 185 mmTable size: 700 x 600 mmOutside dimensions: 1100 x 1700 x 3200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic Double Column Press Fabr. SCHÖN Type TES 16 tMachine -No: 1838 built in 1977Pressure force: 16 tClamping area: 440 x 320 mmgr. distance clamping surface - ram: 280 mmgr. ram stroke: 100 mmDrive power: 5.5 hpOutside dimensions: 1000 x 1000 x 2000 mmWeight approx .: 1000 kgWith- Sick photoelectric barrierUsed, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic table-top press Fabr. VVB ZeulenrodaPressing capacity: 4 tTable size: 220 x 340 mmDischarge: 190 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Single column press make MÜLLER type CD 16.11.55Machine -No: 10480 Year 1983Press force: 16 tTable size: 450 x 350 mmPiston diameter: 90 mmBear size: 320 x 240 mmPiston stroke: 100 mmDiarrhea opening in the table: 100 mmDimensions L x W x H: 700 x 1100 x 2005 mmWith- Cutting impact damping- safe control- Two-hand release- Photocell- infinitely adjustable pressure settingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Double Column Press Fabr. EDELHOFF Type HZP 45Fabr. -No: 8420 built in 1978Max. Punching force: 45 tMax. Ram stroke: 200 mmTable size: 580 x 550 mmInstallation height: 400 mmDistance between the uprights: 600 mmClamping pin hole diameter: 40 H 7Dimensions L x W x H approx. 1200 x 1000 x 2700 mmWeight approx. 3000 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electro-hydraulic. Workshop Press Fabr. DAKO Best. -No: 2510Masch. -No: 1532 year 1977 / frame: homemadePower: 300 barHydraulic cylinder: 200 mm longDrive power: 0.5 kWPower connection: 220 V / 50 HzFrame:Installation height: 1000 mmPassage between the stands: 550 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4-column press make FIBRO FISCHER - BRODBECK type UVOS 63Machine -No: 12-306-08, built in 1964Press force: 63.6 tRetraction force: 33 tOperating pressure: 250 AtuTable surface: 500 x 750 mmClear dimensions between the columns: 260/530 mmStroke: 350 mmInstallation height: 600 mmOutside dimensions approx: 1400 x 750 x 3000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic four-column press make SCHÖN type NH 300Fabric -No: 3519, built in 1986Press force: 30 tTable dimensions: 800 x 350 x 60 mmBreakthrough diam.: 80 mmStroke adjustable up to: 100 mmMax. Installation height: 300 mmStand width: 850 mmMotor power: 5.5 kWDimensions approx: 1700 x 1000 x 2300 mmWith- Photocell SICKused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single column press make NEFF type 6 SEKFabr. -No: 2634 Year 1971Max. Press force: 6 tProjection: 200 mmTable size: 400 x 600 mmInstallation height: 900 mmTable tension: 160 x 380 mmDimensions L x W x H: 1300 x 900 x 2400 mmWith-Zweihandausrückungused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single column press make MAE type S-RH 160Max. Pressure: 160 tProjection: 360 mmStroke: 500 mmPressure piston diameter: 280 mmDrive power: 22 kWWeight approx: 10 tDimensions approx: 1800 x 1400 x 3000 mmWith- with horn dimensions: 720 long, 570 x 570 mm side lengthxa0xa0 with 1 T-groove on topused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic toggle press make SCHLING type UNI 3 PNKMachine -No: 3637 Year 1986Press force: 6 tStroke adjustable: 0 - 25 mmOperating pressure: 8 barProjection: 100 mmTable size: 200 x 160 mmDimensions: 300 x 200 x 850 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic Press Fabr. SMC Cylinder Type CDS 1 WFN 160-150-A51Built in 1987Pressing force: 150 kg = 9.9 kgf / cm²Stroke: 160 mmRam diameter: 50 mmDistance between the side uprights: 360 mmProjection: 150 mmInstallation height: 280 mmOutside dimensions approx: 450 x 350 x 800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand lever press make GARANT type 150378Pressing force: 1.0 tRam diameter: 40 mmStroke max. 350 mmDischarge: 260 mmTable diameter: 210 mmOutside dimensions approx: 530 x 200 x 750 mmWith- UnderframeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic toggle press make SCHLING type UNI 3 PNKMachine -No: 3657Press force: 6 tStroke adjustable: 0 - 25 mmOperating pressure: 8 barProjection: 100 mmTable size: 200 x 160 mmDimensions: 300 x 200 x 850 mm:UsedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic toggle press make SCHLING type UNI 3 PNKMasch. -No: 3562Technical specifications:Pressing force: 6.0 tStroke adjustable: 0 - 25 mmOperating pressure: 8.0 barThroat: 100 mmTable size: 200 x 160 mmDimensions: 300 x 200 x 850 mm:usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand Screw Press Fabr. OSTERWALDER Type HSP 100Machine -No: 771504, built in 1977Press force: 10 tPassage between the uprights: 400 mmTable size: 450 x 380 mmInstallation height: 370 mmStroke: 370 mmlateral. Passage: 150 mmTable height: 80 mmSize of the diarrhea hole i. Table: 160 mmOutside dimensions: 900 x 900 x 2130 mmWith- pneum. loweringused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Turning pin press make MATRAPressing force: 1.5 tProjection: 200 mmInstallation height: 300 mmTable diameter: 180 mmMandrel diameter: 55 mmOutside dimensions (without base) approx: 500 x 280 x 750 mmWith- UnderframeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Very nice model of a:Friction wheel forging press make BERRENBERG type RSSP 280/800Technical data from the original:Spindle diameter: 280 mmPressing force: 800 MPMaximum force: 1600 MPWorking capacity: 7000 MPMax. Stroke rate: 40 H / min.Size of the model approx: 420 x 260 x 540 mmSize of the original approx: 4200 x 2600 x 5400 mmMade by a training workshop in support of the sale of such a machine in the Soviet Union.Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Foot pendulum press Fabr. LUXTable size: 300 x 175 mmDiarrhea hole: 60 mmProjection: 110 mmOutside dimensions approx: 550 x 570 x 1450 mmused, older, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spindle press make RICHTER type HSP 25Machine -No: 510 built in 1953Max. Press force: 25 tTable size: 540 x 400 mmBear size: 420 x 200 mmSpindle diameter: 70 mmStroke: 180 mmExternal dimensions approx: 1200 x 1200 x 2000 mmused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual screw press manufactured by VEB Morgenröthe, type PSHZ 25Masch. -No: 3682 Year of construction 1963Technical specifications:Max. Pressing force: 25 tTable size: 500 x 430 mmBear size: 500 x 200 mmInstallation height: 430 mmSpindle diameter: 70 mmWeight approx: 950 kgExternal dimensions approx: 1450 x 1450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand spindle press make RAS type 300/20-No: 108/7 built in 1957Technical specifications:Max. Printing capacity: 20 tPassage: 340 mmTable size: 250 x 620 mmStroke: 200 mmSpindle diameter: 60 mmColumn diameter: 70 mmRam area: 330 x 110 mmInstallation height: 260 mmWith- baseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size: 240 x 210 mmProjection: 165 mmDistance table - ram: 250 mmExternal dimensions L x W x H: 400 x 310 x 640 mmColour blueused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size drm. : 200 mm2 recesses in the table: 30, 60 cm wideProjection: 265 mmDistance table - ram: 390 mmExternal dimensions L x W x H: 600 x 280 x 870 mmColor grayused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-column screw press make probably WMWTechnical specifications:Pressing force approx.: 10 t (estimated)Handwheel diameter: 800 mmProjection between the uprights: 400 mmTable size: 350 x 440 mmHole in the table Drm. : 100 mmRam: 130 x 110 mmInstallation height: 300 mmExternal dimensions L x W x H: 900 x 500 x 1780 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size Drm. : 200 mmThroat: 250 mmDistance table - ram: 300 mmMandrel diameter: 45 mmExternal dimensions L x W x H: 550 x 220 x 700 mmColor orangeWith- Base 1000 x 500 x 830 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Arbor press with ratchet drive make AGEO type DP 2Fabr. -No: 1231, built in 1964Technical specifications:Pressure force: 1.5 tProjection: 220 mmInstallation height: 350 mmRam diameter: 50 mmRam stroke: 350 mmWeight with underframe approx: 130 kgwith- Lever with ratchet- underframe- Support plate with slotsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spotting- and test injection press make REIS type TUS 60 AMachine -No: 791, built in 1974Max. Mold area: 600 x 1000 mmMax. Mold height: 727 mmMax. Mold weight: 2500 kgEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Load capacity of the upper swing-out plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmColumn diameter: 80 mmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H approx.: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Control panel- Test sprayer- Heater- ejectorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We ...

Spotting Press Fabr. GUSTAV HESSMERT Type TSD 40Masch. -No: 125/85 built in 1985Pressing and clamping pressure: 20 - 400 kNRetraction pressure: 100 kNDischarge pressure: 5 - 40 kNOperating pressure: 200 barClosing speed: 0 - 17 mm / sec.Opening speed: 0 - 37 mm / sec.Press speed: 0 - 4.0 mm / sec.Usable table surface: 600 x 600 mmInstallation height: 600 mmRam stroke: 300 mmAustoßerhub: 150 mmDisplacement weight: 600 kgSwivel and rotary weight: 300 kgSwivel and rotation angle: 180 degr.Operating pressure: 250 barConnected load: 380/220 V, 4.0 kWWeight approx: 2,3 tWith- swivel head above- T-slot table 0.6 x 0.6 m- in 2015 renewal of the PLC control Siemens,xa0xa0 with new program recording and network connectionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors ex ...

Spotting and test spray press make REIS type TUS 60 / 0K 20Machine -No: 19137/79 Year 1979Technical specifications:Press force: 20 tRetraction force: 10 tgr. stroke: 775 mmEjector force: 3.0 tEjector travel: 200 mmOperating pressure: 175 barTable mounting surface: 570 x 670 mmDistance between columns: 620/470 mmInstallation height: 740 mmPiston diameter: 120 mmDrive power: 7.5 kWtotal installed power: 9.5 kWDimensions L x W x H: 1900 x 1200 x 3100 mmWeight approx: 2300 kgWith- Test spray device- 2 hydr. sockets- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Frame Straightening Press / Body Sealer Fabr. GILETTEType and year unknownTotal length approx: 3,0 mmobileWith- Hand hydraulic- a lot of accessories, chains, fasteners etc.according to enclosed phototsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic horizontal straightening machine make SCHULZ type HPR / PR 160 MPMachine -No: 54471 Year 1977Max. Printing capacity: 160 tOperating pressure: 280 barRam stroke: 650 mmPlunger surface: 1000 x 200 mmTable surface: 1000 x 650 mmDrive power: 55 kWWeight approx: 10tWith- Press pressure setting- clamping pressure adjustment- 2 two-handed outlets movable- adjustable / limited stroke lengthsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical straightening press make EITEL type RP 25Technical specifications:Press force: 25 tDimensions (LxWxH) approx.: 1400 x 900 x 2100 mmWeight approx: 2000 kgOil filling: 150 lWith- Straightening harness- hydraulic control device- Extension tables 3000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools